This is the final project for ECE 1000, Explorations in ECE, which was taught by Dr. Bhattacharya at Tennessee Tech.

a irrigation system with arduino

Utilizando un sensor de nivel de agua, una bomba, un relé, un par de botones y un par de LEDs realizamos un llenado controlado de un recipiente.

IoT Smart Garden Setup with Nano RP2040 Connect to automatically monitor and water your plants from an app with offline support.

Inteligencia de Negocio (IN) 2019-2020 Grado en Ingeniería Informática UGR

Solar powered HomeAssistant/ESPHome plant watering system

Making a kitchen garden (orchard) with an LDR, humidity sensor, a water pump and a LCD display that is watered automatically, using Arduino and the library TimerOne. The amount of dirt deposited in the garden (in kg) must be modified by the user. Made in group with Ezequiel B, Nicole S and Olivia F for an exhibition in November, 2020

The software part of Egyptian STEM schools capstone project "Azotobacter C"

This project aims to automate the watering of plants to ensure they receive the right amount of water without manual intervention. This system uses an Arduino microcontroller to monitor soil moisture levels and control the watering process accordingly.

Plant watering system based on Arduino Nano, real time clock (RTC DS3231) and 12V water pump.

Fire Detection through Flame and Gas Sensor (IOT)

An automatic water pump control system is a great way to keep your water pumping system running smoothly and efficiently. By automatically regulating the amount of water that is pumped, these systems can help to avoid over-pumping and wasting water.

Set the pump speed percentage (PWM) through the serial port and I2C from another MCU.

An automatic hand sanitizer dispenser built with Wemos D1 Mini. Uses an ultrasonic sensor to trigger a water pump.

Arduino (ESP8266) controlled waterpump

Tanzanian water pump classification.

Weekly volume of water pumped for handpumps monitored with Smart Handpump technology, Kwale County, Kenya

Automatic water pump controller

The program integrates two sensors and pumps, namely a water pressure sensor and a flow sensor. The flow rate and pressure can be read through a personal computer, and the pump speed percentage (PWM) can be set through the serial port.

O projeto Estufa Automática tem por objetivo desenvolver três estufas, medindo e atuando sobre a temperatura, luminosidade e umidade do solo. Essa implementação fará uso do protocolo MQTT, tornando as estufas em objetos virtuais para IoT, o que permitirá um controle à distância das estufas (que estarão colocadas em duas cidades) e,além disso, pe…