We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
I want to make my own firmware, but the serial port output is as follows after burning, I hope to get help, thank you!
U-Boot SPL 2019.04 (Nov 26 2021 - 20:51:43 -0800) DRAM: 32 MiB SPL: Unsupported Boot Device! Trying to boot from sunxi SPI U-Boot 2019.04 (Nov 26 2021 - 20:51:43 -0800) Allwinner Technology CPU: Allwinner F Series (SUNIV) Model: George Hilliard's business card DRAM: 32 MiB In: serial@1c25000 Out: serial@1c25000 Err: serial@1c25000 Hit any key to stop autoboot: 0 SF: Detected xt25f128b with page size 256 Bytes, erase size 64 KiB, total 16 MiB ubi0: attaching mtd2 ubi0 error: scan_peb: bad image sequence number 968073679 in PEB 124, expected 858837755 Erase counter header dump: magic 0x55424923 version 1 ec 1 vid_hdr_offset 64 data_offset 128 image_seq 968073679 hdr_crc 0x5c0e5e7f erase counter header hexdump: 00000000: 55 42 49 23 01 00 00 00 00 00 00 00 00 00 00 01 00 00 00 40 00 00 00 80 39 b3 a1 cf 00 00 00 00 UBI#...............@....9....... 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5c 0e 5e 7f ............................\.^. ubi0 error: ubi_attach_mtd_dev: failed to attach mtd2, error -22 UBI error: cannot attach mtd2 UBI error: cannot initialize UBI, error -22 UBI init error 22 Please check, if the correct MTD partition is used (size big enough?) Error, no UBI device selected! Error, no UBI device selected! => <INTERRUPT> =>
The text was updated successfully, but these errors were encountered:
No branches or pull requests
I want to make my own firmware, but the serial port output is as follows after burning, I hope to get help, thank you!
The text was updated successfully, but these errors were encountered: