Not an issue, just feedback for Jura F9 codes

[Rookie0ne]

Thanks for this awesome project, I got this to work without a problem on my Jura F9 machine (7 PIN service port).

Because the Jura F9 machine seems to have a different software coding I hope that this maybe can help some other users:

FA:02 : Wartung / Rinse button
FA:06 : 1 Tasse Normal / 1 cup normal button
FA:07 : 2 Tassen Normal / 2 cup normal button
FA:09 : Milchschaeumer aufheizen / Heat up milk foamer
FA:10 : Configure: Staerke - Mild / Touch button select: Mild stength
FA:11 : Configure: Staerke - Normal / Touch button select: Medium strength
FA:12 : Configure: Staerke - Stark / Touch button select: Strong
FA:15 : Reinigungsprogram starten / Start cleaning program
FA:18 : Enter Menu (Long press "P")
FA:19 : "Start" button
FA:0A : Hot Water
FA:0B : Pulver Kaffee / Powder Coffee
FA:0D : Configure: Grosse Tasse / Large cup
FA:0E : Configure: Medium Tasse / Medium cup
FA:0F : Configure: Espresso Tasse / Espesso cup

Example of combining commands to make a strong, medium cup of coffee:
- uart.write: [0xFB, 0xDF, 0xDB, 0xDF] ## 'F'
- delay: 8ms
- uart.write: [0xDF, 0xDB, 0xDB, 0xDF] ## 'A'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xFF, 0xDB] ## ':'
- delay: 8ms
- uart.write: [0xDB, 0xDB, 0xFF, 0xDB] ## '0'
- delay: 8ms
- uart.write: [0xDF, 0xDF, 0xDB, 0xDF] ## 'E'
- delay: 8ms
- uart.write: [0xDF, 0xFF, 0xDB, 0xDB] ## '\r'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xDB, 0xDB] ## '\n'
- delay: 100ms
- uart.write: [0xFB, 0xDF, 0xDB, 0xDF] ## 'F'
- delay: 8ms
- uart.write: [0xDF, 0xDB, 0xDB, 0xDF] ## 'A'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xFF, 0xDB] ## ':'
- delay: 8ms
- uart.write: [0xDF, 0xDB, 0xFF, 0xDB] ## '1'
- delay: 8ms
- uart.write: [0xFB, 0xDB, 0xFF, 0xDB] ## '2'
- delay: 8ms
- uart.write: [0xDF, 0xFF, 0xDB, 0xDB] ## '\r'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xDB, 0xDB] ## '\n'
- delay: 100ms
- uart.write: [0xFB, 0xDF, 0xDB, 0xDF] ## 'F'
- delay: 8ms
- uart.write: [0xDF, 0xDB, 0xDB, 0xDF] ## 'A'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xFF, 0xDB] ## ':'
- delay: 8ms
- uart.write: [0xDF, 0xDB, 0xFF, 0xDB] ## '1'
- delay: 8ms
- uart.write: [0xDF, 0xFB, 0xFF, 0xDB] ## '9'
- delay: 8ms
- uart.write: [0xDF, 0xFF, 0xDB, 0xDB] ## '\r'
- delay: 8ms
- uart.write: [0xFB, 0xFB, 0xDB, 0xDB] ## '\n'

Hope this helps!

[hebbister]

Thanks for this project!

IMPRESSA X7 codes here:

https://protocol-jura.at.ua/index/commands_for_coffeemaker/0-5

[f-fritz]

Hey, thanks for the codes! They work flawlessly on the Jura F90 as well.