v3d cuase garbled window with firefox-esr wayland

[emojifreak]

Describe the bug
firefox-esr with gnome wayland session gives garbled windows as attached below. module_blacklist=v3d in cmdline.txt or selecting Gnome on X.org from a display manager suppresses the symptom.

To reproduce

dtoverlay=vc4-kms-v3d-pi4 or dtoverlay=vc4-kms-v3d or dtoverlay=vc4-fkms-v3d in `config.txt. Full config.txt looks like

disable_overscan=1
disable_fw_kms_setup=1
dtparam=audio=on,watchdog=on
hdmi_enable_4kp60=1
dtoverlay=vc4-fkms-v3d
arm_64bit=1

$ dpkg-query -W | egrep 'raspberry|firefox|gnome-shell'
chrome-gnome-shell	10.1-5
firefox-esr	78.8.0esr-1
firefox-esr-l10n-ja	78.8.0esr-1
gnome-shell	3.38.3-3
gnome-shell-common	3.38.3-3
gnome-shell-extension-prefs	3.38.3-3
gnome-shell-extensions	3.38.2-1
libraspberrypi-bin	2+git20201022~151804+e432bc3-1
libraspberrypi0	2+git20201022~151804+e432bc3-1
raspberrypi-archive-keyring	2016.10.31
raspberrypi-bootloader	1.20210303-1
raspberrypi-kernel	1.20210303-1

Log in to a gnome wayland session, and start firerfox-esr.

Expected behaviour
Show a sensible window by firefox.

Actual behaviour
The firerox window is garbled as attached below.

System
Copy and paste the results of the raspinfo command in to this section.

System Information
------------------

Raspberry Pi 4 Model B Rev 1.4
PRETTY_NAME="Debian GNU/Linux bullseye/sid"
NAME="Debian GNU/Linux"
ID=debian
HOME_URL="https://www.debian.org/"


Linux raspios-test 5.10.17-v8+ #1403 SMP PREEMPT Mon Feb 22 11:37:54 GMT 2021 aarch64 GNU/Linux
Revision	: d03114
Serial		: 10000000488d2af3
Model		: Raspberry Pi 4 Model B Rev 1.4
Throttled flag  : throttled=0x0
Camera          : supported=0 detected=0

Videocore information
---------------------

Feb 25 2021 12:10:40 
Copyright (c) 2012 Broadcom
version 564e5f9b852b23a330b1764bcf0b2d022a20afd0 (clean) (release) (start)

alloc failures:     0
compactions:        0
legacy block fails: 0

Filesystem information
----------------------
Filesystem      1K-blocks    Used  Available Use% Mounted on
/dev/root      1911145440 7811340 1806179436   1% /
devtmpfs          3867012       0    3867012   0% /dev
tmpfs             3999908       0    3999908   0% /dev/shm
tmpfs             1599964    1464    1598500   1% /run
tmpfs                5120       4       5116   1% /run/lock
/dev/sda1          257071   30047     227024  12% /boot
tmpfs              799980      92     799888   1% /run/user/1000

Filename				Type		Size		Used		Priority
/dev/sda3                               partition	10484800	0		-2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: (none)
raspberrypi-sys-mods:
  Installed: (none)
openbox:
  Installed: (none)
lxpanel:
  Installed: (none)
pcmanfm:
  Installed: (none)
rpd-plym-splash:
  Installed: (none)

Networking Information
----------------------

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 142  bytes 12124 (11.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 142  bytes 12124 (11.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lxcbr0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y.y.y.y.y.y.y.y  prefixlen 64  scopeid 0x0<global>
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 42057  bytes 56628429 (54.0 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 18644  bytes 2401518 (2.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 3: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 4: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
        |__ Port 4: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M

config.txt
----------

arm_64bit=1
arm_freq=1500
audio_pwm_mode=514
config_hdmi_boost=5
core_freq=550
core_freq_min=220
disable_commandline_tags=2
disable_fw_kms_setup=1
disable_l2cache=1
disable_overscan=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=2
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
hdmi_enable_4kp60=1
hdmi_samples_limit=0x1f4000
init_uart_clock=0x2dc6c00
lcd_framerate=60
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=25635
max_framebuffer_height=2160
max_framebuffer_width=3840
max_framebuffers=-1
over_voltage_avs=-10000
pause_burst_frames=1
program_serial_random=1
total_mem=8192
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x23c34600
hdmi_pixel_freq_limit:1=0x9a7ec80
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=DC:A6:32:BB:99:D9 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  root=PARTUUID=3a4b2547-3d31-4143-bc71-8a2c90572110 rootfstype=ext4 fsck.repair=yes rootwait

raspi-gpio settings
-------------------

BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=0 func=INPUT pull=UP
GPIO 8: level=1 fsel=0 func=INPUT pull=UP
GPIO 9: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 10: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 11: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 25: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=0 fsel=0 func=INPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=1 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=1 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=1 fsel=4 alt=0 func=PWM1_0 pull=NONE
GPIO 41: level=1 fsel=4 alt=0 func=PWM1_1 pull=NONE
GPIO 42: level=0 fsel=1 func=OUTPUT pull=UP
GPIO 43: level=1 fsel=0 func=INPUT pull=UP
GPIO 44: level=1 fsel=0 func=INPUT pull=UP
GPIO 45: level=1 fsel=0 func=INPUT pull=UP
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 49: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 50: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 51: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 52: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 53: level=0 fsel=0 func=INPUT pull=DOWN

vcdbg log messages
------------------

sudo: vcdbg: command not found

dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 5.10.17-v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1403 SMP PREEMPT Mon Feb 22 11:37:54 GMT 2021
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.4
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003b2fffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000fbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Zeroed struct page in unavailable ranges: 256 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 2061056
[    0.000000]   DMA zone: 3788 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 242432 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 12288 pages used for memmap
[    0.000000]   DMA32 zone: 770048 pages, LIFO batch:63
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:63
[    0.000000] percpu: Embedded 32 pages/cpu s91224 r8192 d31656 u131072
[    0.000000] pcpu-alloc: s91224 r8192 d31656 u131072 alloc=32*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Spectre-v2
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2028596
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1  smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  root=PARTUUID=3a4b2547-3d31-4143-bc71-8a2c90572110 rootfstype=ext4 fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x0000000037300000-0x000000003b300000] (64MB)
[    0.000000] Memory: 7734024K/8244224K available (10944K kernel code, 1918K rwdata, 3912K rodata, 3648K init, 1240K bss, 248056K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 36199 entries in 142 pages
[    0.000000] ftrace: allocated 142 pages with 4 groups
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 10)
[    0.000000] random: get_random_bytes called from start_kernel+0x3b8/0x578 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000248] Console: colour dummy device 80x25
[    0.000791] printk: console [tty0] enabled
[    0.000851] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000891] pid_max: default: 32768 minimum: 301
[    0.001037] LSM: Security Framework initializing
[    0.001317] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001441] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.002901] Disabling memory control group subsystem
[    0.005241] rcu: Hierarchical SRCU implementation.
[    0.006372] EFI services will not be available.
[    0.006917] smp: Bringing up secondary CPUs ...
[    0.008042] Detected PIPT I-cache on CPU1
[    0.008127] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.009248] Detected PIPT I-cache on CPU2
[    0.009298] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.010401] Detected PIPT I-cache on CPU3
[    0.010449] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.010599] smp: Brought up 1 node, 4 CPUs
[    0.010691] SMP: Total of 4 processors activated.
[    0.010715] CPU features: detected: 32-bit EL0 Support
[    0.010736] CPU features: detected: CRC32 instructions
[    0.010758] CPU features: detected: 32-bit EL1 Support
[    0.044077] CPU: All CPU(s) started at EL2
[    0.044166] alternatives: patching kernel code
[    0.046333] devtmpfs: initialized
[    0.057541] Enabled cp15_barrier support
[    0.057610] Enabled setend support
[    0.057835] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.057882] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.066506] pinctrl core: initialized pinctrl subsystem
[    0.067273] DMI not present or invalid.
[    0.067635] NET: Registered protocol family 16
[    0.070742] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.071033] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.071942] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.072058] audit: initializing netlink subsys (disabled)
[    0.072510] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[    0.073045] thermal_sys: Registered thermal governor 'step_wise'
[    0.073529] cpuidle: using governor menu
[    0.073833] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.074029] ASID allocator initialised with 65536 entries
[    0.074164] Serial: AMBA PL011 UART driver
[    0.112313] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.120442] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:10:40, variant start
[    0.124451] raspberrypi-firmware soc:firmware: Firmware hash is 564e5f9b852b23a330b1764bcf0b2d022a20afd0
[    0.157799] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[    0.161855] vgaarb: loaded
[    0.162318] SCSI subsystem initialized
[    0.162559] usbcore: registered new interface driver usbfs
[    0.162626] usbcore: registered new interface driver hub
[    0.162703] usbcore: registered new device driver usb
[    0.163085] usb_phy_generic phy: supply vcc not found, using dummy regulator
[    0.164984] clocksource: Switched to clocksource arch_sys_counter
[    1.196357] VFS: Disk quotas dquot_6.6.0
[    1.196488] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.196664] FS-Cache: Loaded
[    1.196932] CacheFiles: Loaded
[    1.199278] simple-framebuffer 3cb52000.framebuffer: framebuffer at 0x3cb52000, 0x1fa4000 bytes, mapped to 0x(____ptrval____)
[    1.199316] simple-framebuffer 3cb52000.framebuffer: format=a8r8g8b8, mode=3840x2160x32, linelength=15360
[    1.246945] Console: switching to colour frame buffer device 480x135
[    1.292368] simple-framebuffer 3cb52000.framebuffer: fb0: simplefb registered!
[    1.303019] NET: Registered protocol family 2
[    1.304052] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.304333] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    1.304870] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    1.306034] TCP: Hash tables configured (established 65536 bind 65536)
[    1.306479] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.306680] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    1.307190] NET: Registered protocol family 1
[    1.308319] RPC: Registered named UNIX socket transport module.
[    1.308404] RPC: Registered udp transport module.
[    1.308469] RPC: Registered tcp transport module.
[    1.308530] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.308619] PCI: CLS 0 bytes, default 64
[    1.311149] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.311549] kvm [1]: IPA Size Limit: 44 bits
[    1.312763] kvm [1]: vgic interrupt IRQ9
[    1.313126] kvm [1]: Hyp mode initialized successfully
[    1.315634] Initialise system trusted keyrings
[    1.316070] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    1.322966] zbud: loaded
[    1.324842] FS-Cache: Netfs 'nfs' registered for caching
[    1.325687] NFS: Registering the id_resolver key type
[    1.325807] Key type id_resolver registered
[    1.325868] Key type id_legacy registered
[    1.326035] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.327319] Key type asymmetric registered
[    1.327383] Asymmetric key parser 'x509' registered
[    1.327518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.327888] io scheduler mq-deadline registered
[    1.327957] io scheduler kyber registered
[    1.332327] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    1.332445] brcm-pcie fd500000.pcie:   No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[    1.332611] brcm-pcie fd500000.pcie:      MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[    1.332774] brcm-pcie fd500000.pcie:   IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000
[    1.399078] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[    1.399527] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    1.399617] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.399694] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[    1.399879] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    1.400167] pci 0000:00:00.0: PME# supported from D0 D3hot
[    1.404046] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    1.404181] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    1.404485] pci 0000:01:00.0: PME# supported from D0 D3hot
[    1.408072] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    1.408173] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    1.408289] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.408365] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    1.416767] iproc-rng200 fe104000.rng: hwrng registered
[    1.417321] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
[    1.418341] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    1.418853] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.430085] brd: module loaded
[    1.443000] loop: module loaded
[    1.444780] Loading iSCSI transport class v2.0-870.
[    1.447417] libphy: Fixed MDIO Bus: probed
[    1.449287] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.461007] libphy: bcmgenet MII bus: probed
[    1.509147] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[    1.510367] usbcore: registered new interface driver r8152
[    1.510523] usbcore: registered new interface driver lan78xx
[    1.510647] usbcore: registered new interface driver smsc95xx
[    1.558452] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    1.558710] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.558806] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    1.559630] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000030000000890
[    1.561097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    1.561203] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.561292] usb usb1: Product: xHCI Host Controller
[    1.561360] usb usb1: Manufacturer: Linux 5.10.17-v8+ xhci-hcd
[    1.561436] usb usb1: SerialNumber: 0000:01:00.0
[    1.562225] hub 1-0:1.0: USB hub found
[    1.562368] hub 1-0:1.0: 1 port detected
[    1.563047] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    1.563132] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    1.563232] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    1.563689] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    1.563794] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.563882] usb usb2: Product: xHCI Host Controller
[    1.563947] usb usb2: Manufacturer: Linux 5.10.17-v8+ xhci-hcd
[    1.564022] usb usb2: SerialNumber: 0000:01:00.0
[    1.564727] hub 2-0:1.0: USB hub found
[    1.564841] hub 2-0:1.0: 4 ports detected
[    1.566600] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.566979] dwc_otg: FIQ enabled
[    1.566991] dwc_otg: NAK holdoff enabled
[    1.567001] dwc_otg: FIQ split-transaction FSM enabled
[    1.567015] Module dwc_common_port init
[    1.567523] usbcore: registered new interface driver uas
[    1.567681] usbcore: registered new interface driver usb-storage
[    1.567966] mousedev: PS/2 mouse device common for all mice
[    1.570188] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    1.573959] sdhci: Secure Digital Host Controller Interface driver
[    1.574056] sdhci: Copyright(c) Pierre Ossman
[    1.574855] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    1.575491] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.579217] ledtrig-cpu: registered to indicate activity on CPUs
[    1.579652] hid: raw HID events driver (C) Jiri Kosina
[    1.579945] usbcore: registered new interface driver usbhid
[    1.580021] usbhid: USB HID core driver
[    1.588127] Initializing XFRM netlink socket
[    1.588250] NET: Registered protocol family 17
[    1.588456] Key type dns_resolver registered
[    1.589078] registered taskstats version 1
[    1.589161] Loading compiled-in X.509 certificates
[    1.589785] Key type ._fscrypt registered
[    1.589851] Key type .fscrypt registered
[    1.589908] Key type fscrypt-provisioning registered
[    1.601775] uart-pl011 fe201000.serial: there is not valid maps for state default
[    1.608846] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    1.615522] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 23, base_baud = 0) is a PL011 rev2
[    1.628602] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    1.636195] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.642794] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    1.680613] of_cfs_init
[    1.687392] of_cfs_init: OK
[    1.699135] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.707339] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.715436] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.721879] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    1.728942] Waiting for root device PARTUUID=3a4b2547-3d31-4143-bc71-8a2c90572110...
[    1.731758] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.743638] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.790162] random: fast init done
[    1.822064] mmc1: new high speed SDIO card at address 0001
[    1.897016] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.051721] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21
[    2.058201] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.064690] usb 1-1: Product: USB2.0 Hub
[    2.072953] hub 1-1:1.0: USB hub found
[    2.079680] hub 1-1:1.0: 4 ports detected
[    2.177434] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.202648] usb 2-2: New USB device found, idVendor=04bb, idProduct=0168, bcdDevice= 0.07
[    2.209112] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.215525] usb 2-2: Product: I-O DATA HDPH-UT 
[    2.221869] usb 2-2: Manufacturer: I-O DATA DEVICE, INC.
[    2.228192] usb 2-2: SerialNumber: 000030000005BE29
[    2.237382] usb-storage 2-2:1.0: USB Mass Storage device detected
[    2.244469] scsi host0: usb-storage 2-2:1.0
[    2.381013] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd
[    2.495793] usb 1-1.3: New USB device found, idVendor=15ca, idProduct=00c3, bcdDevice= 5.12
[    2.501988] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.508300] usb 1-1.3: Product: USB Optical Mouse
[    2.523899] input: USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:15CA:00C3.0001/input/input0
[    2.530957] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:01:00.0-1.3/input0
[    2.617011] usb 1-1.4: new low-speed USB device number 4 using xhci_hcd
[    2.733575] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=4324, bcdDevice= 1.10
[    2.740076] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.746654] usb 1-1.4: Product: USB Keyboard
[    2.753182] usb 1-1.4: Manufacturer: SEM
[    2.768538] input: SEM USB Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:4324.0002/input/input1
[    2.833669] hid-generic 0003:1A2C:4324.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input0
[    2.846555] input: SEM USB Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input2
[    2.913327] input: SEM USB Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4324.0003/input/input3
[    2.920582] hid-generic 0003:1A2C:4324.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:01:00.0-1.4/input1
[    3.261852] scsi 0:0:0:0: Direct-Access     I-O DATA HDPH-UT          0007 PQ: 0 ANSI: 6
[    3.269847] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    3.277705] sd 0:0:0:0: [sda] Write Protect is off
[    3.284751] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[    3.285504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.340703]  sda: sda1 sda2 sda3
[    3.351643] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.619678] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.627010] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    3.675640] devtmpfs: mounted
[    3.690631] Freeing unused kernel memory: 3648K
[    3.697964] Run /sbin/init as init process
[    3.704875]   with arguments:
[    3.704885]     /sbin/init
[    3.704895]   with environment:
[    3.704905]     HOME=/
[    3.704915]     TERM=linux
[    4.782551] systemd[1]: System time before build time, advancing clock.
[    5.145354] NET: Registered protocol family 10
[    5.154440] Segment Routing with IPv6
[    5.357770] systemd[1]: systemd 247.3-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    5.366960] systemd[1]: Detected architecture arm64.
[    5.479077] systemd[1]: Set hostname to <raspios-test>.
[    6.307730] random: crng init done
[    6.329322] systemd-sysv-generator[109]: SysV service '/etc/init.d/exim4' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[    7.171532] systemd-crontab-generator[99]: ignoring /etc/cron.d/e2scrub_all because native timer is present
[    8.062272] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    8.386031] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.403033] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.420224] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.440122] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.455494] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.470660] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.486641] systemd[1]: /lib/systemd/system/cron-failure@.service:11: Special user nobody configured, this is not safe!
[    8.671694] systemd[1]: Queued start job for default target Graphical Interface.
[    8.704376] systemd[1]: Created slice system-getty.slice.
[    8.723173] systemd[1]: Created slice system-modprobe.slice.
[    8.741448] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    8.774391] systemd[1]: Created slice User and Session Slice.
[    8.791377] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.809239] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.826420] systemd[1]: Reached target User and Group Name Lookups.
[    8.843034] systemd[1]: Reached target Remote File Systems.
[    8.859700] systemd[1]: Reached target Slices.
[    8.879416] systemd[1]: Listening on Syslog Socket.
[    8.897216] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.914423] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.932484] systemd[1]: Listening on Journal Audit Socket.
[    8.950085] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.967914] systemd[1]: Listening on Journal Socket.
[    8.986124] systemd[1]: Listening on udev Control Socket.
[    9.003810] systemd[1]: Listening on udev Kernel Socket.
[    9.022006] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    9.048792] systemd[1]: Mounting POSIX Message Queue File System...
[    9.071869] systemd[1]: Mounting Kernel Debug File System...
[    9.095582] systemd[1]: Mounting Kernel Trace File System...
[    9.120329] systemd[1]: Starting Restore / save the current clock...
[    9.143447] systemd[1]: Starting Set the console keyboard layout...
[    9.167903] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    9.191575] systemd[1]: Starting Load Kernel Module configfs...
[    9.233818] systemd[1]: Starting Load Kernel Module drm...
[    9.257237] systemd[1]: Starting Load Kernel Module fuse...
[    9.379290] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    9.409250] systemd[1]: Starting File System Check on Root Device...
[    9.436387] systemd[1]: Starting Journal Service...
[    9.545202] fuse: init (API version 7.32)
[    9.561574] systemd[1]: Starting Load Kernel Modules...
[    9.585369] systemd[1]: Starting Coldplug All udev Devices...
[    9.615892] systemd[1]: Mounted POSIX Message Queue File System.
[    9.635832] systemd[1]: Mounted Kernel Debug File System.
[    9.655502] systemd[1]: Mounted Kernel Trace File System.
[    9.676860] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    9.698259] systemd[1]: modprobe@configfs.service: Succeeded.
[    9.708394] systemd[1]: Finished Load Kernel Module configfs.
[    9.746484] systemd[1]: modprobe@fuse.service: Succeeded.
[    9.758510] systemd[1]: Finished Load Kernel Module fuse.
[    9.779546] systemd[1]: Finished Load Kernel Modules.
[    9.826026] systemd[1]: Mounting FUSE Control File System...
[    9.852332] systemd[1]: Mounting Kernel Configuration File System...
[    9.897675] systemd[1]: Started File System Check Daemon to report status.
[    9.923663] systemd[1]: Starting Apply Kernel Variables...
[    9.956867] systemd[1]: Finished Restore / save the current clock.
[    9.990483] systemd[1]: modprobe@drm.service: Succeeded.
[   10.000931] systemd[1]: Finished Load Kernel Module drm.
[   10.021605] systemd[1]: Started Journal Service.
[   13.787531] EXT4-fs (sda2): re-mounted. Opts: discard
[   13.923295] systemd-journald[125]: Received client request to flush runtime journal.
[   19.518862] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000
[   19.527660] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000
[   19.535991] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000
[   19.544314] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000
[   19.561126] brcmstb-i2c fef04500.i2c:  @97500hz registered in polling mode
[   19.569395] brcmstb-i2c fef09500.i2c:  @97500hz registered in polling mode
[   19.739369] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   19.749416] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   19.757461] [vc_sm_connected_init]: start
[   19.766650] [vc_sm_connected_init]: installed successfully
[   20.050287] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[   20.068925] mc: Linux media interface: v0.10
[   20.486919] videodev: Linux video capture interface: v2.00
[   20.509877] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[   20.525953] bcm2835_audio bcm2835_audio: card created with 8 channels
[   21.384704] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   21.384777] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   21.589399] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   21.688759] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   21.692527] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[   21.717119] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[   21.726095] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[   21.734410] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[   21.742789] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[   21.750744] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[   21.758614] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[   21.766421] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[   21.774065] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[   21.782482] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[   21.830537] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   21.841128] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   21.855677] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   21.863765] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   21.874824] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   21.882630] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   21.894299] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   21.902192] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   22.209711] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[   22.269726] Registered IR keymap rc-cec
[   22.277051] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[   22.287957] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4
[   22.305312] debugfs: Directory 'fef00700.hdmi' with parent 'vc4-hdmi-0' already present!
[   22.314197] vc4_hdmi fef00700.hdmi: ASoC: no DMI vendor name!
[   22.322133] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[   22.330453] Registered IR keymap rc-cec
[   22.338064] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[   22.345421] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input5
[   22.353458] debugfs: Directory 'fef05700.hdmi' with parent 'vc4-hdmi-1' already present!
[   22.361419] vc4_hdmi fef05700.hdmi: ASoC: no DMI vendor name!
[   22.369894] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[   22.377325] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[   22.384769] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[   22.392388] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   22.400648] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   22.408116] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[   22.415792] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[   22.423493] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[   22.431858] checking generic (3cb52000 1fa4000) vs hw (0 ffffffffffffffff)
[   22.431878] fb0: switching to vc4drmfb from simple
[   22.442630] Console: switching to colour dummy device 80x25
[   22.519335] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[   22.629568] Console: switching to colour frame buffer device 480x135
[   22.635178] brcmfmac: F1 signature read @0x18000000=0x15264345
[   22.644447] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   22.645333] usbcore: registered new interface driver brcmfmac
[   22.706568] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device
[   22.936227] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.094977] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2
[   23.350072] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   23.360666] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[   24.397020] Adding 10484800k swap on /dev/sda3.  Priority:-2 extents:1 across:10484800k FS
[   25.310431] FAT-fs (sda1): mounting with "discard" option, but the device does not support discard
[   34.235698] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[   34.236180] bcmgenet fd580000.ethernet eth0: Link is Down
[   34.281108] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   34.826457] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   38.472138] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   52.733247] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.735156] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.821169] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.823136] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.829057] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.829793] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   52.830425] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[   54.179435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   60.044080] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   84.870641] rfkill: input handler disabled
[  107.176951] rfkill: input handler enabled
[  108.458200] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.460599] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.554460] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.556372] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.562474] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.563535] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  108.564263] vc4_hdmi fef05700.hdmi: ASoC: error at snd_soc_dai_startup on fef05700.hdmi: -19
[  120.055632] rfkill: input handler disabled

Logs
The output of raspinfo includes dmesg output.

Additional context

All Debian packages are from Bullseye, not Buster.

[pelwell]

Wayland is not supported in Raspberry Pi OS (or our kernel branches).

[emojifreak]

Wayland is not supported in Raspberry Pi OS (or our kernel branches).

Does that mean DRI/DRM is unsupported? This issue seems to uncover a bug in DRI/DRM part of v3d.ko.

[pelwell]

Do you have another way to demonstrate the problem?

[vanvugt]

AFAIK this is a mutter bug -> https://gitlab.gnome.org/GNOME/mutter/-/issues/1520

[pelwell]

I don't think this is a bug in the Linux v3d driver.