move delay option in position calculation

[luzik]

My roller shutter controller have two inputs that works in two modes:

• full open/close - I have to turn on up/down relay for 0.1 sec and there is no way to stop it
• move up/down - after 2.5 sec up/down relay, shutter start moving until relay is off

First option can be only used when full open or close is requested. Second gives me extra 2.5sec delay that break position calculation - for example 2 x 20% UP is not the same as 1 x 40% UP.

Please consider adding delay option that can be optionally excluded from position calculation.

[luzik]

tasmota have option for that

https://tasmota.github.io/docs/Blinds-and-Shutters/#motor-movement-delays

[luzik]

This "motor delay" option can greatly improve position calculation, and should be quite easy to implement. I believe that in most cases opening cover 10 times for +10% (10, 20, 30...100) will not open it for 100% as it would be with one shot +100%