Skip to content

Latest commit

 

History

History
240 lines (195 loc) · 12.2 KB

README.md

File metadata and controls

240 lines (195 loc) · 12.2 KB

IntegreSql.EF

example workflow NUGET MIT NET6

Provides an infrastructure to easily write FAST integration and unit tests using REAL databases in ASP.Net Core using EntityFramework. Powered by the greatest IntegreSQL.

Short story of how FAST it is: 66 tests execution went from 9 minutes (on PostgreSQL) to 30 seconds (on IntegreSQL)

TL/DR

Use new IntegreSqlClient() if you just want a strongly-typed API to IntegreSQL.

Check out simplified example if you want to use IntegreSQL together with EntityFramework Core (or go below for details).

Don't forget to configure & run IntegreSQL instance (or execute scripts/run-compose.bat to start one in Docker).

Intro

I assume, you are using EFCore and PostgreSQL in your project. If you don't, you don't need the library, so stop reading now :)

There are few approaches for 'mocking' the database in autotests.

  1. Use Repository pattern and just mock the repository layer in tests. According to my personal experience this is quite outdated and noone actually does this anymore :)
  2. The proven approach now is to use EFCore with different database providers.
    1. InMemory Database Provider. Fast, maintained by EF, but is not nearly similar to PostgreSQL, as it's even non-relational. There are A LOT of differences compared to real DB, so going this route is not recommended and discouraged even by Microsoft:

      While in-memory can work for simple, constrained query scenarios, it is highly limited and we discourage its use.

    2. Using Sqlite with filesystem DB or in-memory mode. Works ok, if you don't use any of PostgreSQL specifics (like jsonb or specific functions). Easy to set up and fast. I could recommend it (and this library supports it :)), considering the mentioned limitations.
    3. Using real PostgreSQL instance. Gives the best confidence that your code works and has all features of PostgreSQL :) Unfortunately, it comes at a cost of being quite slow (database creation takes seconds and so does data seeding).

IntegreSQL.EF allows you to use real PostgreSQL instances, and keep the timing under 100ms per test (again, thanks to the IntegreSQL project).

How to use it

Pre-requisite: Run scripts/run-compose.bat. It will run IntegreSQL (on port 5000) and PostgreSQL (on port 5434) docker containers.

Important: if you run tests as part of CI, don't forget to run the same script as part of your CI.

TL/DR

var databaseInitializer = new NpgsqlDatabaseInitializer(
   connectionStringOverride: new() { Host = "localhost", Port = 5434 /* public PostgreSQL port from run-compose.bat */ }
 );
var dbContextOptions = databaseInitializer
             .CreateDatabaseGetDbContextOptionsBuilderSync<ExampleDbContext>()
             .Options;

// Create DbContext and use it in tests (you could create as many DbContexts as you like using the same `dbContextOptions`).
var dbContext = new ExampleDbContext(dbContextOptions);

Unit tests

Check out simplified example.

In UnitTests we usually create an instance of tested class manually. So, if tested class requires DbContext to be passed in constructor, we need to create it within our tests somehow.

Here's a step-by-step guide, which will show how to create a DbContext pointing to the test database:

  1. In test constructor:
    1. Create database initializer of choice (you could use SqliteDatabaseInitializer if you'd like to):
      _databaseInitializer = new NpgsqlDatabaseInitializer(
         // This is needed if you run tests NOT inside the container.
         // 5434 is the public port number of Postgresql instance
         connectionStringOverride: new() { Host = "localhost", Port = 5434 }
       )
    2. Create a new database to be used in test (database will be created using dbContext.Database.EnsureCreated() method):
      var connectionString = _databaseInitializer.CreateDatabaseGetConnectionStringSync<ExampleDbContext>();
    3. Create a DatabaseContextOptions pointing to created database. You will later use this instance to create DbContexts.
       _options = _databaseInitializer.CreateDbContextOptionsBuilder<ExampleDbContext>(
           connectionString
       ).Options;
      Commands from step 2 and 3 could be combined in a single call:
      _dbContextOptions = _databaseInitializer
            .CreateDatabaseGetDbContextOptionsBuilderSync<ExampleDbContext>()
            .Options;
    4. Create a database context to be used in test: new ExampleDbContext(_dbContextOptions)

Use Migrations to set up database

If you want to use Migrations to create a test database, you could do the following (example):

var dbContextOptions = _databaseInitializer.CreateDatabaseGetDbContextOptionsBuilderSync(
            new DatabaseSeedingOptions<ExampleDbContext>(
                "DatabaseUsingMigrations",
                context => context.Database.MigrateAsync(),
                DisableEnsureCreated: true
            )
        );
var dbContext = new ExampleDbContext(dbContextOptions);

Seed data for all tests

If you have some seed data that you want all tests to use, you could seed this data into template database (example).

_dbContextOptions = _databaseInitializer
            .CreateDatabaseGetDbContextOptionsBuilderSync<ExampleDbContext>(
                new DatabaseSeedingOptions<ExampleDbContext>(
                    "DatabaseWithSeedData",
                    async context =>
                    {
                        // Insert any data or do whatever you want with DbContext.
                        // This will be saved into 'template' database that will be cloned for every test.
                        context.Users.Add(new User() { Id = 5, Name = "Eugene" });
                        await context.SaveChangesAsync();
                    }
                )
            )
            .Options;
var dbContext = new ExampleDbContext(dbContextOptions);

Advanced example

There's also a bit more advanced example, which allows to choose Sqlite/Postgres/No database per test.

Integration tests

Integration tests are similar to Unit Tests above, except we need to use some WebApplicationFactory ceremony to create TestServer and TestClient, and alter DI container configuration to use another DbContext connection string.

The key factor to speed up Integration tests is to prepare a template database with seeded data and disable seeding in the Startup (cause it usually takes most of the time).

Check out full simplified example or read the comments below:

 public IntegrationTestSimplified()
 {
     // Create a database initializer of choice:
     _databaseInitializer = new NpgsqlDatabaseInitializer(
         // This is needed if you run tests NOT inside the container.
         // 5434 is the public port number of Postgresql instance
         connectionStringOverride: new() { Host = "localhost", Port = 5434, }
     );

     // Create template database (using EnsureCreated()) and a copy of it to be used in the test
     var connectionString = _databaseInitializer.CreateDatabaseGetConnectionStringSync(
         new BasicDatabaseSeedingOptions<ExampleDbContext>(Name: "Integration")
     );

     // Create a standard WebApplicationFactory to set up web app in tests
     var webAppFactory = new WebApplicationFactory<Program>().WithWebHostBuilder(
         builder =>
         {
             // Inject 'DisableSeed' configuration variable to disable running Migrations in Startup
             builder.ConfigureAppConfiguration(
                 (context, configuration) =>
                 {
                     configuration.AddInMemoryCollection(
                         new KeyValuePair<string, string>[] { new("DisableSeed", "true") }
                     );
                 }
             );

             // Adjust DI configurations with test-specifics
             builder.ConfigureServices(
                 services =>
                 {
                     // Remove default DbContext registration from DI
                     var descriptor = services.Single(
                         d => d.ServiceType == typeof(DbContextOptions<ExampleDbContext>)
                     );
                     services.Remove(descriptor);

                     // Add new DbContext registration
                     services.AddDbContext<ExampleDbContext>(
                         options => _databaseInitializer.UseProvider(options, connectionString)
                     );
                 }
             );
         }
     );
     // Create http client to connect to our TestServer within test
     _httpClient = webAppFactory.CreateDefaultClient();
 }

There's a bit more advanced example here as well.

API

NpgsqlDatabaseInitializer

This is the main entry point to do database caching.

.CreateDatabaseGetConnectionString

Creates a template database (if not created before) using DbContext.Database.EnsureCreated. Accepts a databaseSeedingOptions parameter, which allows to configure some additional seeding (beside standard EnsureCreated).

Then it creates a copy of template database to be used in each test. Returns a connection string for passed DbContext to be used in the test.

Normally you should run this function once per test.

.CreateDatabaseGetDbContextOptionsBuilder

Creates the database using CreateDatabaseGetConnectionString and returns a DbContextOptionsBuilder for the created database.

Returned DbContextOptions are meant to be stored in a Test Class field and used to create a DbContext instance (pointing to the same DB during the test).

This is a simple helper method so you don't have to create DbContextOptions by hand.

.ReturnDatabaseToPool

Returns test database to a pool (which allows consequent tests to reuse this database).

Note that you need to clean up database by yourself before returning it to the pool! If you return a dirty database, consequent tests might fail!

If you don't want to clean it up, just don't use this function (or use RemoveDatabase instead). Dirty databases are automatically deleted by IntegreSQL once database number exceeds a certain limit (500 by default).

.RemoveDatabase

Removes the test database.

You could do this in Dispose method of your test if you don't want to have postgresql databases just hanging around.

However, this is completely optional, and test databases will be deleted by IntegreSQL itself (when there's more than 500 databases).

Advanced

Sometimes in Integration tests you might want to setup a template database by doing API calls. In other words, you need the full-blown TestServer and TestClient to do the seeding. Though, it's not recommended per se (as it's a bit complicated and slower than seeding via DbContext directly), there are perfectly reasonable scenarios for this case.

This library supports that and you could check out an example doing just that.

P.S. The example is intentionally simplified and serves the demonstration purposes only (in real world this example should be converted to DbContext seeding).