sample-tapd.conf

; Sample tapd configuration file.

; The default location for this file is in ~/.tapd/tapd.conf on POSIX OSes,
; $LOCALAPPDATA/Tapd/tapd.conf on Windows,
; ~/Library/Application Support/Tapd/tapd.conf on Mac OS and
; $home/tapd/tapd.conf on Plan9.
; The default location of this file can be overwritten by specifying the
; --configfile= flag when starting tapd.
;
; Boolean values can be specified as true/false or 1/0. Per default booleans are
; always set to false.

; If only one value is specified for an option, then this is also the
; default value used by tapd. In case of multiple (example) values, the default 
; is explicitly mentioned. 
; If the part after the equal sign is empty then tapd has no default for this
; option.

[Application Options]

; Logging level for all subsystems {trace, debug, info, warn, error, critical}
; You may also specify:
; <global-level>,<subsystem>=<level>,<subsystem2>=<level>,... to set the log
; level for individual subsystems. Use "show" to list available subsystems.
; debuglevel=info

; The base directory that contains tapd's data, logs, configuration file, etc.
; The default is ~/.tapd on POSIX OSes, $LOCALAPPDATA/Tapd on
; Windows, ~/Library/Application Support/Tapd on Mac OS, and $home/tapd
; on Plan9.
; tapddir=~/.tapd

; Path to configuration file
; configfile=~/.tapd/tapd.conf

; The directory to store tapd's data within
; datadir=~/.tapd/data

; Directory to log output
; logdir=~/.tapd/logs

; Maximum logfiles to keep (0 for no rotation)
; maxlogfiles=3

; Maximum logfile size in MB
; maxlogfilesize=10

; Write CPU profile to the specified file
; cpuprofile=

; Enable HTTP profiling on either a port or host:port
; profile=

; The number of confirmations we'll wait for before considering a transaction
; safely buried in the chain
; reorgsafedepth=6

; Default proof courier service address
; proofcourieraddr=universerpc://testnet.universe.lightning.finance:10029

; The number of seconds the custodian waits after identifying an asset transfer
; on-chain and before retrieving the corresponding proof
; custodianproofretrievaldelay=5s

; Network to run on (mainnet, regtest, testnet, simnet, signet)
; network=testnet

; Connect to a custom signet network defined by this challenge instead of using
; the global default signet test network -- can be specified multiple times
; signetchallenge=

; Add an interface/port/socket to listen for RPC connections
; rpclisten=

; Add an interface/port/socket to listen for REST connections
; restlisten=

; Path to write the TLS certificate for tapd's RPC and REST services
; tlscertpath=~/.tapd/tls.cert

; Path to write the TLS private key for tapd's RPC and REST services
; tlskeypath=~/.tapd/tls.key

; Adds an extra ip to the generated certificate
; tlsextraip=

; Adds an extra domain to the generated certificate
; tlsextradomain=

; Re-generate TLS certificate and key if the IPs or domains are changed
; tlsautorefresh=false

; Do not include the interface IPs or the system hostname in TLS certificate
; Use first --tlsextradomain as Common Name instead, if set
; tlsdisableautofill=false

; The duration for which the auto-generated TLS certificate will be valid for
; tlscertduration=10080h

; Disable REST API
; norest=false

; Disable TLS for REST connections
; no-rest-tls=false

; The ping interval for REST based WebSocket connections
; Set to 0 to disable sending ping messages from the server side
; ws-ping-interval=30s

; The time we wait for a pong response message on REST based WebSocket
; connections before the connection is closed as inactive
; ws-pong-wait=5s

; Path to write the admin macaroon for tapd's RPC and REST services if it
; doesn't exist
; macaroonpath=

; Disable macaroon authentication
; Can only be used if server is not listening on a public interface
; no-macaroons=false

; Disable macaroon authentication for universe proof courier RPC endpoints
; allow-public-uni-proof-courier=false

; Disable macaroon authentication for stats RPC endpoints
; allow-public-stats=false

; Add an ip:port/hostname to allow cross origin access from
; To allow all origins, set as "*"
; restcors=

; The directory to store Let's Encrypt certificates within
; letsencryptdir=~/.tapd/letsencrypt

; The IP:port on which lnd will listen for Let's Encrypt challenges
; Let's Encrypt will always try to contact on port 80
; Often non-root processes are not allowed to bind to ports lower than 1024
; This configuration option allows a different port to be used, but must be used
; in combination with port forwarding from port 80
; This configuration can also be used to specify another IP address to listen
; on, for example an IPv6 address
; letsencryptlisten=:80

; Request a Let's Encrypt certificate for this domain
; Note that the certificate is only requested and stored when the first rpc
; connection comes in
; letsencryptdomain=

; The email address to use for Let's Encrypt account registration
; letsencryptemail=

; The database backend to use for storing all asset related data
; databasebackend=sqlite

[hashmailcourier]

; The maximum time to wait for the receiver to acknowledge the proof
; hashmailcourier.receiveracktimeout=6h

; Skip the initial delay before attempting to deliver the proof to the receiver
; or receiving from the sender
; hashmailcourier.skipinitdelay=false

; The amount of time to wait before resetting the backoff counter
; hashmailcourier.backoffresetwait=10m

; The number of proof delivery attempts before the backoff counter is reset
; hashmailcourier.numtries=2000

; The initial backoff time to wait before retrying to deliver the proof to the
; receiver
; hashmailcourier.initialbackoff=30s

; The maximum backoff time to wait before retrying to deliver the proof to the
; receiver
; hashmailcourier.maxbackoff=5m

[universerpccourier]

; Skip the initial delay before attempting to deliver the proof to the receiver
; or receiving from the sender
; universerpccourier.skipinitdelay=false

; The amount of time to wait before resetting the backoff counter
; universerpccourier.backoffresetwait=10m

; The number of proof delivery attempts before the backoff counter is reset
; universerpccourier.numtries=2000

; The initial backoff time to wait before retrying to deliver the proof to the
; receiver
; universerpccourier.initialbackoff=30s

; The maximum backoff time to wait before retrying to deliver the proof to the
; receiver
; universerpccourier.maxbackoff=5m

[lnd]

; lnd instance rpc address
; lnd.host=localhost:10009

; DEPRECATED: Use macaroonpath
; lnd.macaroondir=

; The full path to the single macaroon to use, either the admin.macaroon or a
; custom baked one
; Cannot be specified at the same time as macaroondir
; A custom macaroon must contain ALL permissions required for all subservers to
; work, otherwise permission errors will occur
; lnd.macaroonpath=~/.lnd/data/chain/bitcoin/testnet/admin.macaroon

; Path to lnd tls certificate
; lnd.tlspath=

[sqlite]

; Skip applying migrations on startup
; sqlite.skipmigrations=false

; Skip database backup before schema migration
; sqlite.skipmigrationdbbackup=false

; The full path to the database
; sqlite.dbfile=~/.tapd/data/testnet/tapd.db

[postgres]

; Skip applying migrations on startup
; postgres.skipmigrations=false

; Database server hostname
; postgres.host=localhost

; Database server port
; postgres.port=5432

; Database user
; postgres.user=

; Database user's password
; postgres.password=

; Database name to use
; postgres.dbname=

; Max open connections to keep alive to the database server
; postgres.maxconnections=10

; Max number of idle connections to keep in the connection pool
; postgres.maxidleconnections=

; Max amount of time a connection can be reused for before it is closed
; postgres.connmaxlifetime=

; Max amount of time a connection can be idle for before it is closed
; postgres.connmaxidletime=

; Whether to require using SSL (mode: require) when connecting to the server
; postgres.requiressl=false

[universe]

; Amount of time to wait between universe syncs
; universe.syncinterval=10m

; The host:port of a Universe server peer with
; These servers will be added as the default set of federation servers
; Can be specified multiple times
; universe.federationserver=

; If set, the federation syncer will default to syncing all assets
; universe.sync-all-assets=false

; The public access mode for the universe server, controlling whether remote
; parties can read from and/or write to this universe server over RPC if
; exposed to a public network interface
; This can be unset, 'r', 'w', or 'rw'
; If unset, public access is not enabled for the universe server
; If 'r' is included, public access is allowed for read-only endpoints
; If 'w' is included, public access is allowed for write endpoints
; universe.public-access=

; The amount of time to cache stats for before refreshing them
; universe.stats-cache-duration=

; The maximum number of queries per second across the set of active universe
; queries that is permitted
; Anything above this starts to get rate limited
; universe.max-qps=100

; The burst budget for the universe query rate limiting
; universe.req-burst-budget=10

[address]

; If true, tapd will not try to sync issuance proofs for unknown assets when
; creating an address
; address.disable-syncer=false

[prometheus]

; If true prometheus metrics will be exported
; prometheus.active=false

; The interface we should listen on for prometheus
; prometheus.listenaddr=127.0.0.1:8989

; Enable additional histogram to track gRPC call processing performance
; (latency, etc)
; prometheus.perfhistograms=false

[experimental]

; Price oracle gRPC server address (rfqrpc://<hostname>:<port>)
; To use the integrated mock, use the following value:
; use_mock_price_oracle_service_promise_to_not_use_on_mainnet
; experimental.rfq.priceoracleaddress=

; The default price deviation inparts per million that is accepted by 
; the RFQ negotiator.
; Example: 50,000 ppm => price deviation is set to 5% .
; experimental.rfq.acceptpricedeviationppm=50000

; Accept any price quote returned by RFQ peer, skipping price validation
; experimental.rfq.skipacceptquotepricecheck=false

; Mock price oracle static asset units per BTC rate (for example number of USD
; cents per BTC if one asset unit represents a USD cent); whole numbers only,
; use either this or mockoraclesatsperasset depending on required precision
; experimental.rfq.mockoracleassetsperbtc=

; Mock price oracle static satoshis per asset unit rate (for example number of
; satoshis to pay for one USD cent if one asset unit represents a USD cent);
; whole numbers only, use either this or mockoracleassetsperbtc depending on
; required precision
; experimental.rfq.mockoraclesatsperasset=