add a WebTransport spec

webtransport/README.md

@@ -0,0 +1,64 @@
+# libp2p WebTransport
+
+| Lifecycle Stage | Maturity                 | Status | Latest Revision |
+|-----------------|--------------------------|--------|-----------------|
+| 1A              | Candidate Recommendation | Active | r0, 2022-10-12  |
+
+Authors: [@marten-seemann]
+
+Interest Group: [@MarcoPolo], [@mxinden]
+
+See the [lifecycle document](../00-framework-01-spec-lifecycle.md) for context about maturity level
+and spec status.
+
+## Introduction
+
+[WebTransport](https://datatracker.ietf.org/doc/draft-ietf-webtrans-overview/) is a way for browsers to establish a stream-multiplexed and bidirectional connection to servers. The WebTransport protocol is currently under development at the IETF. The primary way to do this is by running on top of a HTTP/3 connection [WebTransport over HTTP/3](https://datatracker.ietf.org/doc/draft-ietf-webtrans-http3/). For situations where it is not possible to establish a HTTP/3 connection (e.g. when UDP is blocked), there's a HTTP/2 fallback ([WebTransport using HTTP/2](https://datatracker.ietf.org/doc/draft-ietf-webtrans-http2/)).
+
+In this document, we mean WebTransport over HTTP/3 when using the term WebTransport.
+
+Chrome has implemented and shipped support for [draft-02](https://datatracker.ietf.org/doc/draft-ietf-webtrans-http3/02/), and Firefox [is working](https://bugzilla.mozilla.org/show_bug.cgi?id=1709355) on WebTransport support.
+
+The most exciting feature for libp2p (other than the numerous performance benefits that QUIC gives us) is that the W3C added a browser API allowing browsers to establish connections to nodes with self-signed certificates, provided they know the hash of the certificate in advance: [`serverCertificateHashes`](https://www.w3.org/TR/webtransport/#dom-webtransportoptions-servercertificatehashes). This API is already [implemented in Chrome](https://chromestatus.com/feature/5690646332440576), and Firefox is [likely to implement](https://github.com/mozilla/standards-positions/issues/167#issuecomment-1015951396) this part of the specification as well.
+
+## Certificates
+
+According to the [w3c WebTransport specification](https://www.w3.org/TR/webtransport/), there are two ways for a browser to validate the certificate used on a WebTransport connection. 
+1. by verifying the chain of trust of the certificate. This means that the certificate has to be signed by a CA (Certificate Authority) that the browser trusts. This is how browsers verify certificates when establishing a regular HTTPS connection.
+2. by verifying that the cryptographic hash of the certificate matches a specific value, using the [`serverCertificateHashes`](https://www.w3.org/TR/webtransport/#dom-webtransportoptions-servercertificatehashes) option.
+
+libp2p nodes that possess a CA-signed TLS certificate MAY use that certificate on WebTransport connections. These nodes SHOULD NOT add a `/certhash` component (see [Addressing](#addressing)) to addresses they advertise, since this will cause clients to verify the certificate by the hash (instead of verifying the certificate chain).
+
+The rest of this section applies to nodes that wish to use self-signed certificates and make use of the verification by certificate hash.
+
+According to the w3c specification, the validity of the certificate MUST be at most 14 days, and MUST NOT use an RSA key. Nodes then include the hash of one (or more) certificates in their multiaddr (see [Addressing](#addressing)).
+
+Servers need to take care of regularly renewing their certificates. In the following, the RECOMMENDED logic for rolling certificates is described. At first boot of the node, it creates one self-signed certificate with a validity of 14 days, starting immediately, and another certificate with the 14 day validity period starting on the expiry date of the first certificate. The node advertises a multiaddress containing the certificate hashes of these two certificates.
+Once the first certificate has expired, the node starts using the already generated next certificate. At the same time, it again generates a new certificate for the following period and updates the multiaddress it advertises.
+
+## Addressing
+
+WebTransport multiaddresses are composed of a QUIC multiaddress, followed by `/webtransport` and a list of multihashes of the certificates that the server uses (if not using a CA-signed certificate).
+Examples:
+* `/ip4/1.2.3.4/udp/443/quic/webtransport` (when using a CA-signed certificates)
+* `/ip4/1.2.3.4/udp/1234/quic/webtransport/certhash/<hash1>` (when using single self-signed certificates)
+* `/ip6/fe80::1ff:fe23:4567:890a/udp/1234/quic/webtransport/certhash/<hash1>/certhash/<hash2>/certhash/<hash3>` (when using single self-signed certificates)
+
+## WebTransport HTTP endpoint
+
+WebTransport needs a HTTPS URL to establish a WebTransport session, e.g. `https://example.com/webtransport`. At the point of writing multiaddresses don't allow the encoding of URLs, therefore this spec standardizes the endpoint. The HTTP endpoint of a libp2p WebTransport server MUST be located at `/.well-known/libp2p-webtransport`.
+
+To allow future evolution of the way we run the libp2p handshake over WebTransport, we use a URL parameter. The handshake described in this document MUST be signaled by setting the `type` URL parameter to `noise`.
+
+Example: The WebTransport URL of a WebTransport server advertising `/ip4/1.2.3.4/udp/1443/quic/webtransport/` would be `https://1.2.3.4:1443/.well-known/libp2p-webtransport?type=noise`.
+
+## Security Handshake
+
+Unfortunately, the self-signed certificate doesn't allow the nodes to authenticate each others' peer IDs. It is therefore necessary to run an additional libp2p handshake on a newly established WebTransport connection.
+The first stream that the client opens on a new WebTransport session is used to perform a libp2p handshake using Noise (https://github.com/libp2p/specs/tree/master/noise). The client SHOULD start the handshake right after sending the CONNECT request, without waiting for the server's response.
+
+In order to verify end-to-end encryption of the connection, the peers need to establish that no MITM intercepted the connection. To do so, the server MUST include the certificate hash of the currently used certificate as well as the certificate hashes of all future certificates it has already advertised to the network in the `webtransport_certhashes` Noise extension (see Noise Extension section of the [Noise spec](/noise/README.md)). The hash of recently used, but expired certificates SHOULD also be included.
+
+On receipt of the `webtransport_certhashes` extension, the client MUST verify that the certificate hash of the certificate that was used on the connection is contained in the server's list. If the client was willing to accept multiple certificate hashes, but cannot determine which certificate was actually used to establish the connection (this will commonly be the case for browser clients), it MUST verify that all certificate hashes are contained in the server's list. If verification fails, it MUST abort the handshake.
+
+For the client, the libp2p connection is fully established once it has sent the last Noise handshake message. For the server, processing of that message completes the handshake.