liquidctl.8

'\" t
.nr is_macos 0
.TH LIQUIDCTL 8 2021\-01\-25 "liquidctl" "System Manager's Manual"
.
.SH NAME
liquidctl \- monitor and control liquid coolers and other devices
.
.SH SYNOPSIS
.SY liquidctl
.RI [ options ]
.B list
.SY liquidctl
.RI [ options ]
.B initialize
.RB [ all ]
.SY liquidctl
.RI [ options ]
.B status
.SY liquidctl
.RI [ options ]
.B set
.I channel
.B speed
.RI ( temperature
.IR percentage )
\&.\|.\|.\&
.SY liquidctl
.RI [ options ]
.B set
.I channel
.B speed
.I percentage
.SY liquidctl
.RI [ options ]
.B set
.I channel
.B color
.I mode
.RI [ color
\&.\|.\|.\&]
.SY liquidctl
.B \-\-version
.SY liquidctl
.B \-\-help
.YS
.
.SH DESCRIPTION
\fBliquidctl\fR is a utility for overseeing and controlling some hardware
monitoring devices not yet supported at the kernel level.
.if !\n[is_macos]\{  Because \fBliquidctl\fR directly accesses the hardware devices, root
privileges are generally required, though this can be avoided with
appropriate udev rules.
.\}
.PP
\fBliquidctl list\fR outputs all compatible devices found on the system.  In
case more than one device is found, the desired one can be selected for later
invocations with \fB--match=\fIsubstring\fR, where \fIsubstring\fR matches part
of the desired device's description using a case insensitive comparison.
.PP
\fBliquidctl list \fI\-\-verbose\fR enables the display of additional
identifiers and addresses that can also be used to select specific devices.
These can be better suited for certain use cases, such as non-interactive
scripts.
.PP
\fBliquidctl initialize\fR prepares a device for later commands, and most
devices must be initialized after every boot or when resuming from a suspended
state.  Unless finer control is required, all devices can be initialized at
once with \fBliquidctl initialize all\fR.  Some devices may output some
information at this stage.
.PP
\fBliquidctl status\fR displays the status of all devices that match the
provided filtering options.
.PP
\fBliquidctl set \fIchannel\fB speed\fR allows the user to set fan and pump
speeds.  These, depending on the device, can be set to fixed duty values,
variable temperature\–duty curves, or both.
.PP
\fBliquidctl set \fIchannel\fB color\fR allows the user to configure and set
lighting modes.  Supported lighting modes and additional options vary by device
and are listed in later sections of this manual.  Each color can be specified
as:
.IP \(bu
hexadecimal RGB with or without prefix '0x': \fIff7f3f\fR;
.IP \(bu
decimal RGB triple, R,G,B ∊ [0, 255]: \fIrgb(255,127,63)\fR;
.IP \(bu
hue\-saturation\-value HSV triple, H ∊ [0, 360], S,V ∊ [0, 100]: \fIhsv(20,75,100)\fR;
.IP \(bu
hue\-saturation\-lightness HSL triple, H ∊ [0, 360], S,L ∊ [0, 100]: \fIhsl(20,100,62)\fR.
.
.SH OPTIONS
.
.SS Device selection options
Devices can be selected using one or more values taken from \fBlist \fI\-\-verbose\fP.
.TP
.BI \-m\  substring\fR,\ \fP \-\-match= substring
Filter devices by case insensitive substring of device description.
.TP
.BI \-n\  number\fR,\ \fP \-\-pick= number
Pick among many results for a given filter.
.TP
.BI \-\-vendor= id
Filter devices by hexadecimal vendor id.
.TP
.BI \-\-product= id
Filter devices by hexadecimal product id.
.TP
.BI \-\-release= number
Filter devices by hexadecimal release number.
.TP
.BI \-\-serial= number
Filter devices by serial number.
.TP
.BI \-\-bus= bus
Filter devices by bus.
.TP
.BI \-\-address= address
Filter devices by address in bus.
.TP
.BI \-\-usb\-port= port
Filter devices by USB port in bus.
.TP
.BI \-d\  id\fR,\ \fP \-\-device= id
Select device by listing ID.
.
.SS Animation options
Some devices and animation modes support additional options.
.TP
.BI \-\-speed= value
Abstract animation speed (device/mode specific).
.TP
.BI \-\-time\-per\-color= value
Time to wait on each color (seconds).
.TP
.BI \-\-time\-off= value
Time to wait with the LED turned off (seconds).
.TP
.BI \-\-alert\-threshold= number
Threshold temperature for a visual alert (degrees Celsius).
.TP
.BI \-\-alert\-color= color
Color used by the visual high temperature alert.
.TP
.BI \-\-direction= string
If the pattern should move forward or backwards. [default: forward].
.TP
.BI \-\-start\-led= number
The first led to start the effect at.
.TP
.BI \-\-maximum\-leds= number
The number of LED's the effect should apply to.
.
.SS Other options
.TP
.B \-\-single\-12v\-ocp
Enable single rail +12V OCP.
.TP
.B \-\-pump\-mode= mode
Set the pump mode.
.TP
.B \-\-temperature\-sensor= number
The temperature sensor number for the Commander Pro.
.TP
.B \-\-legacy\-690lc
Use Asetek 690LC in legacy mode (old Krakens).
.TP
.B \-\-non\-volatile
Store on non\-volatile controller memory.
.TP
.B \-\-unsafe= features
Comman-separated bleeding-edge features to enable.
.TP
.B \-v\fR, \fP\-\-verbose
Output additional information.
.TP
.B \-g\fR, \fB\-\-debug
Show debug information on \fIstderr\fR.
.TP
.B \-\-version
Display the version number.
.TP
.B \-\-help
Show the embedded help.
.
.SH EXIT STATUS
1 if there was an error, 0 otherwise.
.
.SH FILES
.TP
.ie \n[is_macos]
.I ~/Library/Caches/liquidctl/*
.el
.IR $XDG_RUNTIME_DIR/liquidctl/* ,\  /var/run/liquidctl/* ,\  /tmp/liquidctl/*
Internal data used by some drivers.
.\" e.g. RuntimeStorage for Legacy690Lc and HydroPlatinum
.
.SH EXAMPLE
.SY liquidctl
.B list \-\-verbose
.SY liquidctl
.B initialize all
.SY liquidctl
.BI \-\-match\  kraken\  set\  pump\  speed\  90
.SY liquidctl
.BI \-\-product\  170e\  set\  led\  color\  fading
.I 350017 ff2608
.SY liquidctl
.B status
.YS
.
.SH DEVICE SPECIFICS
.
.SS Corsair Commander Pro
.SS Corsair Lighting Node Pro
.SS Corsair Lighting Node Core
Cooling channels (only Commander Pro): \fIsync\fR, \fIfan[1\-5]\fR.
.PP
Lighting channels: (only Lighting Node Core:) \fIled\fR;
(only Commander Pro and and Lighting Node Pro:) \fIsync\fR, \fIled[1\-2]\fR.
.TS
l c
---
l c .
Mode	#colors
\fIclear\fR	0
\fIoff\fR	0
\fIfixed\fR	1
\fIcolor_shift\fR	2
\fIcolor_pulse\fR	2
\fIcolor_wave\fR	2
\fIvisor\fR	2
\fIblink\fR	2
\fImarquee\fR	1
\fIsequential\fR	1
\fIrainbow\fR	0
\fIrainbow2\fR	0
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIfast\fR, \fImedium\fR, \fIslow\fR.
.PP
The animation direction can be set with
.BI \-\-direction= value ,
where the allowed values are: \fIforward\fR or \fIbackward\fR.
.BI \-\-start\-led= number ,
the first LED that the lighting effect should be for.
.BI \-\-start\-led= number ,
the first LED that the lighting effect should be for.
.BI \-\-maximum\-led= number ,
the number of LEDs that the lighting effect should applied to.
.BI \-\-temperature\-sensor= number ,
The temperature sensor that should be used to control the fan curves, probe 1 by default.
.SS Corsair H80i GT, H100i GTX, H110i GTX
.SS Corsair H80i v2, H100i v2, H115i
.SS EVGA CLC 120 (CL12), 240, 280, 360
Cooling channels: \fIpump\fR, \fIfan\fR.
.PP
Lighting channels: \fIlogo\fR.
.TS
l c c
---
l c c .
Mode	#colors	notes
\fIrainbow\fR	0	only availble on EVGA coolers
\fIfading\fR	2
\fIblinking\fR	1
\fIfixed\fR	1
\fIblackout\fR	0	no high-temperature alerts
.TE
.PP
The \fIrainbow\fR mode speed can be configured with
.BI \-\-speed= [1\(en6] .
The speed of the other modes is instead customized with
.B \-\-time\-per\-color
.RI ( fading\  and\  blinking )
and
.B \-\-time\-off
.RI ( blinking\  only).
.PP
All modes except
.I blackout
support a visual high-temperature alert configured with
.B \-\-alert\-threshold
and
.BR \-\-alert\-color .
.
.SS Corsair H100i Platinum, H100i Platinum SE, H115i Platinum
.SS Corsair H100i Pro XT, H115i Pro XT , H150i Pro XT
Fan channels: \fIfan\fR, \fIfan[1\(en2]\fR; (only H150i Pro XT:) \fIfan3\fR.
.PP
Pump mode (\fBinitialize \-\-pump\-mode \fImode\fR): \fIquiet\fR, \fIbalanced\fR (default), \fIextreme\fR.
.PP
Lighting channels: \fIsync\fR, \fIled\fR.
.TS
l l c c c
-----
l l c c c .
Channel	Mode	#colors (Platinum)	#colors (Pro XT)	#colors (Platinum SE)
\fIled\fR	\fIoff\fR	0	0	0
\fIled\fR	\fIfixed\fR	1	1	1
\fIled\fR	\fIsuper\-fixed\fR	24	16	48
.TE
.
.SS NZXT Kraken X40, X60
.SS NZXT Kraken X31, X41, X61
Supports the same modes and options as a Corsair H80i GT (or similar), but
requires \fB\-\-legacy\-690lc\fR to be passed on all invocations.
.
.SS NZXT Kraken M22
.SS NZXT Kraken X42, X52, X62, X72
Cooling channels (only X42, X52, X62, X72): \fIpump\fR, \fIfan\fR.
.PP
Lighting channels: \fIlogo\fR, \fIring\fR, \fIsync\fR.
.TS
l c c c
----
l c c c .
Mode	logo	ring	#colors
\fIoff\fR	yes	yes	0
\fIfixed\fR	yes	yes	1
\fIsuper\-fixed\fR	yes	yes	1\(en9
\fIfading\fR	yes	yes	2\(en8
\fIalternating\fR	no	yes	2
\fIbreathing\fR	yes	yes	1\(en8
\fIsuper\-breathing\fR	yes	yes	1\(en9
\fIpulse\fR	yes	yes	1\(en8
\fItai\-chi\fR	no	yes	2
\fIwater\-cooler\fR	no	yes	0
\fIloading\fR	no	yes	1
\fIwings\fR	no	yes	1
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR.
The animation direction can be set with
.BI \-\-direction= value ,
where the allowed values are: \fIforward\fR or \fIbackward\fR.
.
.SS NZXT Kraken X53, X63, X73
.SS NZXT Kraken Z63, Z73
Cooling channels: \fIpump\fR; (only Z63, Z73:) \fIfan\fR.
.PP
Lighting channels: \fIexternal\fR; (only X53, X63, X73:) \fIring\fR, \fIlogo\fR, \fIsync\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIfading\fR	2\(en8
\fIsuper\-fixed\fR	1\(en40
\fIalternating\-[3\-6]\fR	1\(en2
\fIpulse\fR	1\(en8
\fIbreathing\fR	1\(en8
\fIsuper\-breathing\fR	1\(en40
\fIcandle\fR	1
\fIstarry\-night\fR	1
\fIloading\fR	1
\fItai\-chi\fR	1\(en2
\fIwater\-cooler\fR	2
\fIwings\fR	1
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR.
The animation direction can be set with
.BI \-\-direction= value ,
where the allowed values are: \fIforward\fR or \fIbackward\fR.
.
.SS Corsair HX750i, HX850i, HX1000i, HX1200i
.SS Corsair RM650i, RM750i, RM850i, RM1000i
Fan channels: \fIfan\fR.
.PP
Lighting channels: none.
.PP
Setting a fixed fan speed changes the fan mode to software control.  To revert
back to hardware control, run \fBinitialize\fR again.
.PP
(Experimental feature) The +12V rails normally function in multiple-rail mode.
Single-rail mode can be selected by passing \fB\-\-single\-12v\-ocp\fR to
\fBinitialize\fR.  To revert back to multiple-rail mode, run \fBinitialize\fR
again without that flag.
.
.SS NZXT E500, E650, E850
Fan channels: none (feature not supported yet).
.PP
Lighting channels: none.
.
.SS NZXT Grid+ V3
Fan channels: \fIfan[1\(en6]\fR, \fIsync\fR.
.PP
Lighting channels: none.
.
.SS NZXT Smart Device (V1)
Fan channels: \fIfan[1\(en3]\fR, \fIsync\fR.
.PP
Lighting channels: \fIled\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIsuper\-fixed\fR	1\(en40
\fIfading\fR	2\(en8
\fIalternating\fR	2
\fIbreathing\fR	1\(en8
\fIsuper\-breathing\fR	1\(en40
\fIpulse\fR	1\(en8
\fIcandle\fR	1
\fIwings\fR	1
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR.
The animation direction can be set with
.BI \-\-direction= value ,
where the allowed values are: \fIforward\fR or \fIbackward\fR.
.
.SS NZXT Smart Device V2
.SS NZXT RGB & Fan Controller
.SS NZXT HUE 2
.SS NZXT HUE 2 Ambient
Fan channels (only Smart Device V2 and RGB & Fan Controller): \fIfan[1\(en3]\fR.
.PP
Lighting channels: \fIled[1\(en2]\fR, \fIsync\fR.
.PP
Additional lighting channels (only HUE 2): \fIled[3\(en4]\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIsuper\-fixed\fR	1\(en40
\fIfading\fR	2\(en8
\fIalternating\-[3\-6]\fR	2
\fIpulse\fR	1\(en8
\fIbreathing\fR	1\(en8
\fIsuper\-breathing\fR	1\(en40
\fIcandle\fR	1
\fIstarry\-night\fR	1
\fIwings\fR	1
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR.
The animation direction can be set with
.BI \-\-direction= value ,
where the allowed values are: \fIforward\fR or \fIbackward\fR.
.
.SS ASUS Strix GTX 1070
.SS ASUS Strix RTX 2080 Ti OC
Fan channels: none.
.PP
Lighting channels: \fIled\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIflash\fR	1
\fIbreathing\fR	1
\fIrainbow\fR	0
.TE
.
.SS Corsair Vengeance RGB
Fan channels: none.
.PP
Lighting channels: \fIled\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIbreathing\fR	1\(en7
\fIfading\fR	2\(en7
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR.
.
.SS Gigabyte RGB Fusion 2.0 5702 Controller
.SS Gigabyte RGB Fusion 2.0 8297 Controller
Fan channels: none.
.PP
Lighting channels: \fIled[1\(en8]\fR, \fIsync\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIpulse\fR	1
\fI(double\-)?flash\fR	1
\fIcolor\-cycle\fR	0
.TE
.PP
When applicable the animation speed can be set with
.BI \-\-speed= value ,
where the allowed values are: \fIslowest\fR, \fIslower\fR, \fInormal\fR,
\fIfaster\fR, \fIfastest\fR, \fIludicrous\fR.
.
.SS EVGA GTX 1080 FTW
Fan channels: none.
.PP
Lighting channels: \fIled\fR.
.TS
l c
----
l c .
Mode	#colors
\fIoff\fR	0
\fIfixed\fR	1
\fIbreathing\fR	1
\fIrainbow\fR	0
.TE
.
.SH SEE ALSO
The complete documentation is available in
the project's sources and
.UR https://github.com/liquidctl/liquidctl
homepage
.UE .