Skip to content

Latest commit

 

History

History
40 lines (32 loc) · 1.66 KB

nzxt-e-series-psu-guide.md

File metadata and controls

40 lines (32 loc) · 1.66 KB

NZXT E-series PSUs

Driver API and source code available in liquidctl.driver.nzxt_epsu.

Initialization

It is necessary to initialize the device once it has been powered on.

# liquidctl initialize

Note: at the moment initialize is a no-op, but this is likely to change once more features are added to the driver.

Monitoring

The PSU is able to report monitoring data about its own hardware and the output rails.

# liquidctl status
NZXT E500 (experimental)
├── Temperature                                    45.0  °C
├── Fan speed                                       505  rpm
├── Firmware version                         A017/40983
├── +12V peripherals output voltage               11.89  V
├── +12V peripherals output current                7.75  A
├── +12V peripherals output power                 14.48  W
├── +12V EPS/ATX12V output voltage                11.95  V
├── +12V EPS/ATX12V output current                 0.00  A
├── +12V EPS/ATX12V output power                   0.00  W
├── +12V motherboard/PCI-e output voltage         11.96  V
├── +12V motherboard/PCI-e output current          1.00  A
├── +12V motherboard/PCI-e output power           11.95  W
├── +5V combined output voltage                    4.90  V
├── +5V combined output current                    0.02  A
├── +5V combined output power                      0.11  W
├── +3.3V combined output voltage                  3.23  V
├── +3.3V combined output current                  0.01  A
└── +3.3V combined output power                    0.02  W