ATI-8324SX-MIB

ATI-8324SX-MIB DEFINITIONS ::= BEGIN

IMPORTS
        internet
                FROM RFC1155-SMI
        MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress
                FROM SNMPv2-SMI
        DisplayString
                FROM SNMPv2-TC;


private		        OBJECT IDENTIFIER ::= { internet 4 }
enterprises	        OBJECT IDENTIFIER ::= { private 1 }
alliedTelesyn       OBJECT IDENTIFIER ::= { enterprises 207 }
products            OBJECT IDENTIFIER ::= { alliedTelesyn 1 }
mibObject           OBJECT IDENTIFIER ::= { alliedTelesyn 8 }
atiTrapAttrs        OBJECT IDENTIFIER ::= { alliedTelesyn 9 }
switches            OBJECT IDENTIFIER ::= { products 4 }
ati8324SX           OBJECT IDENTIFIER ::= { switches 42 }


switchInfo          OBJECT IDENTIFIER ::= { ati8324SX 1 }
switchPortMgt       OBJECT IDENTIFIER ::= { ati8324SX 2 }
systemSTAMgt	    OBJECT IDENTIFIER ::= { ati8324SX 3 }
tftpDownloadMgt		OBJECT IDENTIFIER ::= { ati8324SX 4 }
restartMgt			OBJECT IDENTIFIER ::= { ati8324SX 5 }
portMirrorMgt       OBJECT IDENTIFIER ::= { ati8324SX 6 }
igmpMgt             OBJECT IDENTIFIER ::= { ati8324SX 7 }


--
-- switchInfo
--

switchNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The total number of switches present on this system."
        ::= { switchInfo 1 }


switchInfoTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SwitchInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of descriptive and status information about
                     switches in this system."
        ::= { switchInfo 2 }

switchInfoEntry OBJECT-TYPE
        SYNTAX      SwitchInfoEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing information
                     about a single switch in this system. "
        INDEX       { swUnitIndex }
        ::= { switchInfoTable 1 }

SwitchInfoEntry ::= SEQUENCE
{
    swUnitIndex             Integer32,
    swMainBoardHwVer        DisplayString,
    swMainBoardFwVer        DisplayString,
    swAgentBoardHwVer       DisplayString,
    swAgentBoardFwVer       DisplayString,
    swAgentBoardPOSTCodeVer DisplayString,
    swPortNumber            Integer32,
    swPowerStatus           INTEGER,
    swExpansionSlot1        INTEGER,
    swExpansionSlot2        INTEGER,
    swRoleInSystem          INTEGER
}

swUnitIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object identifies the switch within the system
                     for which this entry contains information. This
                     value can never be greater than switchNumber."
        ::= { switchInfoEntry 1 }

swMainBoardHwVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Hardware version of the main board."
        ::= { switchInfoEntry 2 }

swMainBoardFwVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Firmware version of the main board."
        ::= { switchInfoEntry 3 }

swAgentBoardHwVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Hardware version of the agent board."
        ::= { switchInfoEntry 4 }

swAgentBoardFwVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Firmware version of the agent board."
        ::= { switchInfoEntry 5 }

swAgentBoardPOSTCodeVer OBJECT-TYPE
        SYNTAX      DisplayString (SIZE(0..20))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "POST code version of the agent board."
        ::= { switchInfoEntry 6 }

swPortNumber OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The total port number of this switch (
                     including expansion slot)."
        ::= { switchInfoEntry 7 }

swPowerStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        internalPower(1),
                        redundantPower(2),
                        internalAndRedundantPower(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the switch using internalPower(1),
                     redundantPower(2) or both(3)"
        ::= { switchInfoEntry 8 }

swExpansionSlot1 OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        hundredBaseFX2Port(1),
                        thousandBaseSX(2),
                        stackingModule4GB(3),
                        hundredBaseFX1Port(4),
                        thousandBaseLX(5),
                        thousandBaseT(6),
                        thousandBaseGBIC(7),
                        stackingModule2GB(8),
                        other(9),
                        notPresent(10),
                        tenHundredBaseT(11),
                        thousandBaseSXMtrj2Port(12),
                        thousandBaseSXSc2Port(13),
                        thousandBaseLXSc2Port(14),
                        hundredBaseFXMtrj2Port(15),
                        thousandBaseLXMtrj(16),
                        thousandBaseT2Port(17),
                        thousandBaseGBIC2Port(18)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Type of expansion module in this switch slot 1."
        ::= { switchInfoEntry 9 }

swExpansionSlot2 OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        hundredBaseFX2Port(1),
                        thousandBaseSX(2),
                        stackingModule4GB(3),
                        hundredBaseFX1Port(4),
                        thousandBaseLX(5),
                        thousandBaseT(6),
                        thousandBaseGBIC(7),
                        stackingModule2GB(8),
                        other(9),
                        notPresent(10),
                        tenHundredBaseT(11),
                        thousandBaseSXMtrj2Port(12),
                        thousandBaseSXSc2Port(13),
                        thousandBaseLXSc2Port(14),
                        hundredBaseFXMtrj2Port(15),
                        thousandBaseLXMtrj(16),
                        thousandBaseT2Port(17),
                        thousandBaseGBIC2Port(18)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Type of expansion module in this switch slot 2."
        ::= { switchInfoEntry 10 }

swRoleInSystem OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        master(1),
                        backupMaster(2),
                        slave(3)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
                     or slave(3) in this system."
        ::= { switchInfoEntry 11 }


--
-- switchPortMgt
--

switchPortMgtTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF SwitchPortMgtEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "Table of descriptive and status information about
                     configuration of each switch ports(including expansion slot)
                     in this system."
        ::= { switchPortMgt 1 }

switchPortMgtEntry OBJECT-TYPE
        SYNTAX      SwitchPortMgtEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in the table, containing information
                     about configuration in one switch port of the switch."
        INDEX       { swUnitIndex, swPortMgtIndex }
        ::= { switchPortMgtTable 1 }

SwitchPortMgtEntry ::= SEQUENCE
{
    swPortMgtIndex                Integer32,
    swPortMgtPortType             INTEGER,
    swPortMgtSpeedDpxAdmin        INTEGER,
    swPortMgtSpeedDpxInUse        INTEGER,
    swPortMgtFlowCtrlAdmin        INTEGER,
    swPortMgtFlowCtrlInUse        INTEGER
}

swPortMgtIndex OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This object identifies the port within the switch
                     for which this entry contains information."
        ::= { switchPortMgtEntry 1 }

swPortMgtPortType OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        hundredBaseTX(1),
                        hundredBaseFX(2),
                        thousandBaseSX(3),
                        thousandBaseLX(4),
                        thousandBaseT(5),
                        thousandBaseGBIC(6),
                        other(7)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "Indicates the port type."
        ::= { switchPortMgtEntry 2 }

swPortMgtSpeedDpxAdmin OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        halfDuplex10(1),
                        fullDuplex10(2),
                        halfDuplex100(3),
                        fullDuplex100(4),
                        halfDuplex1000(5),
                        fullDuplex1000(6),
                        autoNegotiation(7)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Set the port speed and duplex mode as follows:
                         halfDuplex10(1)    - 10Mbps and half duplex mode
                         fullDuplex10(2)    - 10Mbps and full duplex mode
                         halfDuplex100(3)   - 100Mbps and half duplex mode
                         fullDuplex100(4)   - 100Mbps and full duplex mode
                         halfDuplex1000(5)  - 1000Mbps and half duplex mode
                         fullDuplex1000(6)  - 1000Mbps and full duplex mode
                         autoNegotiation(7) - let the switch to negotiate
                                              with the other end of connection.
                     hundredBaseTX port can be set as
                         halfDuplex10(1)
                         fullDuplex10(2)
                         halfDuplex100(3)
                         fullDuplex100(4)
                         autoNegotiation(7)
                     hundredBaseFX port can be set as
                         halfDuplex100(3)
                         fullDuplex100(4)
                     thousandBaseSX port can be set as
                         halfDuplex1000(5)
                         fullDuplex1000(6)
                         autoNegotiation(7)
                     The actual operating speed and duplex of the port
                     is given by swPortMgtSpeedDpxInUse."
        DEFVAL      { autoNegotiation }
        ::= { switchPortMgtEntry 3 }

swPortMgtSpeedDpxInUse OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        halfDuplex10(1),
                        fullDuplex10(2),
                        halfDuplex100(3),
                        fullDuplex100(4),
                        halfDuplex1000(5),
                        fullDuplex1000(6)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION "The operating speed and duplex mode of the
                     switched port."
        ::= { switchPortMgtEntry 4 }

swPortMgtFlowCtrlAdmin OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2),
                        backPressure(3),
                        dot3xFlowControl(4)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "(1) Flow control mechanism is enabled.
                         If the port type is hundredBaseTX or thousandBaseSX:
                         When the port is operating in halfDuplex mode, the
                         port uses backPressure flow control mechanism. When
                         the port is operating in fullDuplex mode, the port
                         uses IEEE 802.3x flow control mechanism.
                         If the port type is hundredBaseFX:
                         When the port is operating in halfDuplex mode, the
                         port uses backPressure flow control mechanism. When
                         the port is operating in fullDuplex mode, Flow
                         control mechanism will not function.
                     (2) Flow control mechanism is disabled.
                     (3) Flow control mechanism is backPressure.
                         when the port is in fullDuplex mode.This flow control
                         mechanism will not function.
                     (4) Flow control mechanism is IEEE 802.3x flow control.
                         when the port is in halfDuplex mode.This flow control
                         mechanism will not function.
                     hundredBaseTX and thousandBaseSX port can be set as:
                         enabled(1),
                         disabled(2),
                         backPressure(3),
                         dot3xFlowControl(4).
                     hundredBaseFX port can be set as:
                         enabled(1),
                         disabled(2),
                         backPressure(3).
                     The actual flow control mechanism is used given by
                     swPortMgtFlowCtrlInUse."
        DEFVAL      { enabled }
        ::= { switchPortMgtEntry 5 }

swPortMgtFlowCtrlInUse OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        backPressure(1),
                        dot3xFlowControl(2),
                        none(3)
                    }
        MAX-ACCESS  read-only
        STATUS       current
        DESCRIPTION "(1) BackPressure flow control machanism is used.
                     (2) IEEE 802.3 flow control machanism is used.
                     (3) Flow control mechanism is disabled. "
        ::= { switchPortMgtEntry 6 }

--
-- systemSTAMgt
--

systemSTAStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Global spanning tree status.
                     (1) Spanning tree protocol is enabled.
                     (2) Spanning tree protocol is disabled. "
        DEFVAL      { enabled }
        ::= { systemSTAMgt 1 }

--
-- tftpDownloadMgt
--

tftpDownloadServerIP OBJECT-TYPE
                SYNTAX      IpAddress
                MAX-ACCESS  read-write
                STATUS      current
                DESCRIPTION "The IP address of a TFTP server from which a
                             firmware image can be downloaded."
        DEFVAL { 0.0.0.0 }
        ::= { tftpDownloadMgt 1 }

--tftpDownloadMainBoardFwFileName OBJECT-TYPE
--          SYNTAX      DisplayString (SIZE(0..80))
--          MAX-ACCESS  read-write
--          STATUS      current
--          DESCRIPTION ""
--          DEFVAL      { "" }
--          ::= { tftpDownloadMgt 2 }

--tftpDownloadMainBoardFwSelected OBJECT-TYPE
--          SYNTAX      INTEGER
--                      {
--                          selected(1),
--                          notSelected(2)
--                      }
--          MAX-ACCESS  read-write
--          STATUS      current
--          DESCRIPTION "Setting this object as selected. The system will download
--                       main board firmware when the download action be trigged."
--          DEFVAL      { notSelected }
--          ::= { tftpDownloadMgt 3 }

tftpDownloadAgentBoardFwFileName OBJECT-TYPE
        SYNTAX      DisplayString(SIZE(0..80))
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION ""
        DEFVAL      { "" }
        ::= { tftpDownloadMgt 2 }

tftpDownloadAgentBoardFwDownloadMode OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        permanent(1),
                        temporary(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Indicates whether a newly upgraded firmware
                     version should write to flash.  When this object
                     is temporary(2), following a successful upgrade
                     the system will switch to run the new firmware but
                     will not upgrade the new firmware to flash.  That
                     means after a power cycle, system will run the
                     firmware residing the flash.
                     When this object is permanent(1), following a
                     successful firmware upgrade, the flash will be
                     upgraded and the system will automatically switch
                     to run the new firmware."
        DEFVAL      { permanent }
        ::= { tftpDownloadMgt 3 }

--tftpDownloadAgentBoardFwSelected OBJECT-TYPE
--          SYNTAX      INTEGER
--                      {
--                          selected(1),
--                          notSelected(2)
--                      }
--          MAX-ACCESS  read-write
--          STATUS      current
--          DESCRIPTION "Setting this object as selected. The system will download
--                       agent board firmware when the download action be trigged."
--          DEFVAL      { notSelected }
--          ::= { tftpDownloadMgt 4 }

tftpDownloadStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        active(1),
                        notActive(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object to active(1) triger the TFTP
                     download action.
                     Setting this object to notActive(2) has no effect.
                     The system always returns the value notActive(2)
                     when this object is read."
        ::= { tftpDownloadMgt 4 }

--
-- restartMgt
--

restartOptionPOST OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object as enabled. The system will do POST
                     when it restart"
        DEFVAL      { enabled }
        ::= { restartMgt 1 }

restartOptionReloadFactoryDefault OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object as enabled. The system will do factory
                     reset when it restart"
        DEFVAL      { disabled }
        ::= { restartMgt 2 }

restartOptionKeepIpSetting OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object as enabled. The system will keep IP
                     setting when it do factory reset."
        DEFVAL      { disabled }
        ::= { restartMgt 3 }

restartOptionKeepUserAuthentication OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object as enabled. The system will keep user
                     authentication setting when it do factory reset."
        DEFVAL      { disabled }
        ::= { restartMgt 4 }

restartAction OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        active(1),
                        notActive(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Setting this object to active(1) triger the system
                     restart.
                     Setting this object to notActive(2) has no effect.
                     The system always returns the value notActive(2)
                     when this object is read."
        ::= { restartMgt 5 }

--
-- portMirrorMgt
--

portMirrorStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Port mirroring function status.
                     (1) mirroring function is enabled.
                     (2) mirroring function is disabled."
        ::= { portMirrorMgt 1 }

portMirrorSnifferPort OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Linear port number of sniffer port to which all
                     frames to/from mirrored ports are sent. Frames
                     are only mirrored if the portMirrorStatus object
                     is set to enabled(1)."
        ::= { portMirrorMgt 2 }


portMirrorMirroredPort OBJECT-TYPE
        SYNTAX      Integer32
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Linear port number of mirrored port. The traffic of
                     mirrored port will be 'copied' to sniffer port."
        ::= { portMirrorMgt 3 }

--
-- igmpMgt
--

igmpStatus OBJECT-TYPE
        SYNTAX      INTEGER
                    {
                        enabled(1),
                        disabled(2)
                    }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
                     When enabled, the device will examine IGMP packets and set
                     up filters for IGMP ports. "
        DEFVAL      { enabled }
        ::= { igmpMgt 1 }

igmpQueryCount OBJECT-TYPE
        SYNTAX      INTEGER (2..10)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Maximum number of queries that have not been heard on the
                     system before the system starts taking action to solicit
                     reports."
        DEFVAL      { 2 }
        ::= { igmpMgt 2 }


igmpReportDelay OBJECT-TYPE
        SYNTAX      INTEGER (5..30)
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION "Timeout value (seconds) between IGMP reports received on a port
                     for an IP Multicast Address that can pass before the system
                     sends an IGMP Query out the port and removes it from the
                     list."
        DEFVAL      { 10 }
        ::= { igmpMgt 3 }

END