full_finetune_single_device.py

# Copyright (c) Meta Platforms, Inc. and affiliates.
# All rights reserved.
#
# This source code is licensed under the BSD-style license found in the
# LICENSE file in the root directory of this source tree.

import sys
import time
from functools import partial
from typing import Any, Dict, Optional, Tuple
from warnings import warn

import torch
from omegaconf import DictConfig

from torch import nn
from torch.optim import Optimizer
from torch.utils.data import DataLoader, DistributedSampler

from torchtune import config, modules, utils

from torchtune.recipe_interfaces import FTRecipeInterface

from tqdm import tqdm


log = utils.get_logger("DEBUG")


class FullFinetuneRecipeSingleDevice(FTRecipeInterface):
    """
    Full finetuning recipe for dense transformer-based LLMs such as Llama2. This recipe is optimized
    for single GPU training. Training on CPU is not supported.

    Features:
        - Activation Checkpointing. This can be controlled using the ``activation_checkpointing``
            flag. Activation checkpointing helps reduce the memory footprint since we no longer keep
            activations in memory and instead recompute them during the backward pass. This is especially
            helpful for larger batch sizes when you're memory constrained. But these savings in memory
            come at the cost of training performance. In most cases training can slow-down quite a bit as
            a result of this activation recomputation.

        - Precision. Full fp32 and bf16 training are supported. Precision is controlled using the ``dtype``
            flag. When ``dtype=bf16``, all activations, gradients and optimizer states are in bfloat16. In
            most cases this should halve the memory footprint of full precision (fp32) training, without
            loss in model quality (will depend on the model, training data and other settings). For
            GPUs which do not support bfloat16, we fall back to fp32. Mixed precision training and fp16
            precision are currently not supported.

        - Gradient Accumulation. You can simulate larger batch sizes by accumulating gradients. This is
            controlled using the ``gradient_accumulation_steps`` flag.

                Total Batch Size = batch_size * gradient accumulation steps.

            For example: with batch_size=1 and gradient_accumulation_steps=32 we get a total batch size of 32.

            Gradient accumulation is especially useful when you are memory constrained. In this case,
            accumulating gradients might give you better training speed than enabling activation
            checkpointing.

        - Optimizer in Backward. Fusing the optimizer step into the backward pass helps reduce the memory
            footprint associated with gradients. This can be especially helpful when you are memory
            constrained. Note that users can only use ONE of gradient accumulation or optimizer in backward.
            These features currently do not work together. For more details on optimizer in backward, please
            see this tutorial: https://pytorch.org/tutorials/intermediate/optimizer_step_in_backward_tutorial.html

        - Lower precision optimizers. This recipe supports lower-precision optimizers from the bitsandbytes
            library (https://huggingface.co/docs/bitsandbytes/main/en/index). We've tested the recipe with
            8-bit AdamW and Paged AdamW. These optimizers are especially helpful when you are memory constrained
            since they help reduce the memory footprint associated with the optimizer states.

        - Checkpointing. Model weights are checkpointed both at the end of each epoch and at the end of
            training. Optimizer State and recipe state (seed, total_epochs, number of epochs run etc) are
            only saved at the end of a given epoch and used in case of resuming training.

            Resuming training is controlled by the ``resume_from_checkpoint`` flag. Mid-epoch checkpointing is
            currently not supported.

            For more details on the checkpointer, please take a look at
            our checkpointer deepdive (https://pytorch.org/torchtune/main/deep_dives/checkpointer.html).

        - Logging. Terminal, Disk, WandB and TensorBoard are all supported.

    For a full list of example configs for this recipe, run ``tune ls`` on the command line. Each config
    has example commands for how to kick-off training.

    Args:
        cfg (DictConfig): OmegaConf object parsed from yaml file

    Raises:
        RuntimeError: If ``dtype`` is set to fp16.
        RuntimeError: If ``dtype`` is set to bf16 and the hardware does not support bf16.
        RuntimeError: If ``gradient_accumulation_steps > 1`` and ``optimizer_in_bwd`` is `True`.
    """

    def __init__(self, cfg: DictConfig) -> None:
        self._device = utils.get_device(device=cfg.device)
        self._dtype = utils.get_dtype(cfg.dtype, device=self._device)
        # Disable for fp16, as we haven't validated "full" fp16 with this recipe, nor
        # enabled necessary features such as gradient scaling.
        if self._dtype == torch.float16:
            raise RuntimeError(
                "full fp16 training is not supported with this recipe. Please use bf16 or fp32 instead."
            )

        # logging attributes
        self._output_dir = cfg.output_dir
        self._log_every_n_steps = cfg.get("log_every_n_steps", 1)
        self._log_peak_memory_stats = cfg.get("log_peak_memory_stats", False)

        # Training cfg
        self._resume_from_checkpoint = cfg.resume_from_checkpoint
        self._gradient_accumulation_steps = cfg.gradient_accumulation_steps
        self._optimizer_in_bwd = cfg.optimizer_in_bwd

        # TODO: find a better place / way to perform validation of args that don't yet
        # compose with each other.
        if self._gradient_accumulation_steps > 1 and self._optimizer_in_bwd:
            raise RuntimeError(
                "Gradient accumulation is not supported with optimizer in bwd."
                "Please set gradient_accumulation_steps=1, or optimizer_in_bwd=False."
            )

        # These are public properties which are updated by the checkpoint loader
        # when ``resume_from_checkpoint`` is `True` or validated in tests
        self.seed = utils.set_seed(seed=cfg.seed)
        self.epochs_run = 0
        self.total_epochs = cfg.epochs
        self.max_steps_per_epoch = cfg.max_steps_per_epoch
        self.global_step = 0

    def load_checkpoint(self, cfg_checkpointer: DictConfig) -> Dict[str, Any]:
        """
        Extract the checkpoint state from file and validate. If resume_from_checkpoint
        is True, this also includes the recipe state.
        """
        self._checkpointer = config.instantiate(
            cfg_checkpointer,
            resume_from_checkpoint=self._resume_from_checkpoint,
        )
        checkpoint_dict = self._checkpointer.load_checkpoint()

        if self._resume_from_checkpoint:
            self._update_recipe_state(checkpoint_dict)
        return checkpoint_dict

    def _update_recipe_state(self, ckpt_dict: Dict[str, Any]) -> None:
        """
        Updates the recipe state from checkpoint.
        """
        # If seed, total_epoch or max_steps_per_epoch don't match,
        # warn the user and overwrite
        try:
            if (
                self.seed != ckpt_dict[utils.SEED_KEY]
                or self.total_epochs != ckpt_dict[utils.TOTAL_EPOCHS_KEY]
                or self.max_steps_per_epoch != ckpt_dict[utils.MAX_STEPS_KEY]
            ):
                warn(
                    message="""Configured value for seed, epochs or max_steps_per_epoch
                    does not match the value stored in checkpoint."""
                )
            self.seed = utils.set_seed(seed=ckpt_dict[utils.SEED_KEY])
            self.epochs_run = ckpt_dict[utils.EPOCHS_KEY]
            self.total_epochs = ckpt_dict[utils.TOTAL_EPOCHS_KEY]
            self.max_steps_per_epoch = ckpt_dict[utils.MAX_STEPS_KEY]
        except KeyError as e:
            raise KeyError from e(
                "Checkpoint does not contain the required keys needed for updating recipe state."
                "Are you sure you passed in the right recipe checkpoint?"
            )

    def setup(self, cfg: DictConfig) -> None:
        """
        Sets up the recipe state correctly. This includes setting recipe attributes based
        on the ``resume_from_checkpoint`` flag.
        """
        self._metric_logger = config.instantiate(cfg.metric_logger)

        # log config with parameter override
        self._metric_logger.log_config(cfg)

        ckpt_dict = self.load_checkpoint(cfg.checkpointer)

        # ``_setup_model`` handles initialization and loading the state dict. This method
        # should be called before ``_setup_optimizer`` since transforming the optimizer
        # state dict requires the model
        self._model_compile = cfg.compile
        self._model = self._setup_model(
            cfg_model=cfg.model,
            enable_activation_checkpointing=cfg.enable_activation_checkpointing,
            compile_model=self._model_compile,
            model_state_dict=ckpt_dict[utils.MODEL_KEY],
        )
        self._tokenizer = config.instantiate(cfg.tokenizer)
        log.info("Tokenizer is initialized from file.")

        # _setup_optimizer should take in ckpt_dict only if training is resumed from
        # checkpoint. Transforming the opt state dict is handled by this method
        self._optimizer = self._setup_optimizer(
            cfg_optimizer=cfg.optimizer,
            optimizer_in_bwd=cfg.optimizer_in_bwd,
            opt_state_dict=(
                ckpt_dict[utils.OPT_KEY] if self._resume_from_checkpoint else None
            ),
        )

        self._loss_fn = config.instantiate(cfg.loss)
        log.info("Loss is initialized.")

        # sampler and dataloader depend on the tokenizer and loss_fn and should be
        # setup after both of these are initialized
        self._sampler, self._dataloader = self._setup_data(
            cfg_dataset=cfg.dataset,
            shuffle=cfg.shuffle,
            batch_size=cfg.batch_size,
        )

        # Finally update the recipe state which can only be correctly set after all of the
        # other components have been initialized and updated.
        #
        # Number of training steps in each epoch depends on the number of batches produced
        # by the dataloader, the max_steps_per_epoch param set by the user and the
        # gradient_accumulation_steps param. This value is used for logging and tracking
        # training state. The computation should happen after the dataloader has been setup
        self._steps_per_epoch = (
            len(self._dataloader) // self._gradient_accumulation_steps
        )
        if (
            self.max_steps_per_epoch is not None
            and self.max_steps_per_epoch < self._steps_per_epoch
        ):
            self._steps_per_epoch = self.max_steps_per_epoch
        self.global_step = self.epochs_run * self._steps_per_epoch

    def _setup_model(
        self,
        cfg_model: DictConfig,
        enable_activation_checkpointing: bool,
        compile_model: bool,
        model_state_dict: Dict[str, Any],
    ) -> nn.Module:
        """
        Set up the model including enabling activation checkpointing.
        """
        with utils.set_default_dtype(self._dtype), self._device:
            model = config.instantiate(cfg_model)

        if enable_activation_checkpointing:
            utils.set_activation_checkpointing(
                model, auto_wrap_policy={modules.TransformerDecoderLayer}
            )

        model.load_state_dict(model_state_dict)

        # Validate model was loaded in with the expected dtype.
        utils.validate_expected_param_dtype(model.named_parameters(), dtype=self._dtype)
        log.info(f"Model is initialized with precision {self._dtype}.")

        # Compile model, if enabled.
        if compile_model:
            log.info("Compiling model with torch.compile...")
            model = utils.wrap_compile(model)
        if self._device.type == "cuda":
            memory_stats = utils.get_memory_stats(device=self._device)
            utils.log_memory_stats(memory_stats)

        return model

    def _setup_optimizer(
        self,
        cfg_optimizer: DictConfig,
        optimizer_in_bwd: bool = False,
        opt_state_dict: Optional[Dict[str, Any]] = None,
    ) -> Optional[Optimizer]:
        """
        Set up the optimizer. This method also handles loading the optimizer state_dict, if specified.
        """
        if optimizer_in_bwd:
            # Maintain a dict of optims for every parameter.
            optim_dict = {
                p: config.instantiate(cfg_optimizer, [p])
                for p in self._model.parameters()
            }
            # Register optimizer step hooks on the model to run optimizer in backward.
            utils.register_optim_in_bwd_hooks(model=self._model, optim_dict=optim_dict)
            # Create a wrapper for checkpoint save/load of optimizer states when running in backward.
            self._optim_ckpt_wrapper = utils.create_optim_in_bwd_wrapper(
                model=self._model, optim_dict=optim_dict
            )
            # Load optimizer states. If optimizer states are being restored in an optimizer in backward
            # run, these need to have been saved with the same setting. Cannot restore from runs that did not
            # use optimizer in backward.
            if opt_state_dict is not None:
                try:
                    self._optim_ckpt_wrapper.load_state_dict(opt_state_dict)
                except BaseException as e:
                    raise RuntimeError(
                        "Failed loading in-backward optimizer checkpoints."
                        "Please make sure run being restored from was using in-backward optimizer."
                    ) from e
            log.info("In-backward optimizers are set up.")
            return None
        else:
            optimizer = config.instantiate(cfg_optimizer, self._model.parameters())

            if opt_state_dict:
                optimizer.load_state_dict(opt_state_dict)
            log.info("Optimizer is initialized.")
            return optimizer

    def _setup_data(
        self,
        cfg_dataset: DictConfig,
        shuffle: bool,
        batch_size: int,
    ) -> Tuple[DistributedSampler, DataLoader]:
        """
        All data related setup happens here. Currently this recipe only supports the
        DistributedSamplers with Map-style Datasets which fit into memory. Other samplers,
        iterable datasets and streaming datasets are not supported.
        """
        ds = config.instantiate(
            cfg_dataset,
            tokenizer=self._tokenizer,
        )
        sampler = DistributedSampler(
            ds,
            num_replicas=1,
            rank=0,
            shuffle=shuffle,
            seed=0,
        )
        dataloader = DataLoader(
            dataset=ds,
            batch_size=batch_size,
            sampler=sampler,
            collate_fn=partial(
                utils.padded_collate,
                padding_idx=self._tokenizer.pad_id,
                ignore_idx=self._loss_fn.ignore_index,
            ),
        )

        log.info("Dataset and Sampler are initialized.")

        return sampler, dataloader

    def save_checkpoint(self, epoch: int) -> None:
        """
        Save state dict to file. The recipe save_checkpoint method is responsible for
        correctly creating the checkpoint dict and passing to the checkpointer.
        """
        ckpt_dict = {utils.MODEL_KEY: self._model.state_dict()}
        # if training is in-progress, checkpoint the optimizer state as well
        if epoch + 1 < self.total_epochs:
            ckpt_dict.update(
                {
                    utils.SEED_KEY: self.seed,
                    utils.EPOCHS_KEY: self.epochs_run,
                    utils.TOTAL_EPOCHS_KEY: self.total_epochs,
                    utils.MAX_STEPS_KEY: self.max_steps_per_epoch,
                }
            )
            if not self._optimizer_in_bwd:
                ckpt_dict[utils.OPT_KEY] = self._optimizer.state_dict()
            else:
                ckpt_dict[utils.OPT_KEY] = self._optim_ckpt_wrapper.state_dict()
        self._checkpointer.save_checkpoint(
            ckpt_dict,
            epoch=epoch,
            intermediate_checkpoint=(epoch + 1 < self.total_epochs),
        )

    def train(self) -> None:
        """
        The core training loop. Supports training on subsets of the dataset using the
        ``max_steps_per_epoch``.
        """
        if self._model_compile:
            log.info(
                "NOTE: torch.compile is enabled and model is compiled in first forward. Expect a relatively slow first iteration."
            )
        # zero out the gradients before starting training
        if not self._optimizer_in_bwd:
            self._optimizer.zero_grad()

        # Initialize tokens count and running loss (for grad accumulation)
        t0 = time.perf_counter()
        running_loss = 0
        num_tokens = 0

        # self.epochs_run should be non-zero when we're resuming from a checkpoint
        for curr_epoch in range(self.epochs_run, self.total_epochs):
            # Update the sampler to ensure data is correctly shuffled across epochs
            # in case shuffle is True
            self._sampler.set_epoch(curr_epoch)

            pbar = tqdm(total=self._steps_per_epoch)
            for idx, batch in enumerate(self._dataloader):
                if (
                    self.max_steps_per_epoch is not None
                    and (idx // self._gradient_accumulation_steps)
                    == self.max_steps_per_epoch
                ):
                    break
                input_ids, labels = batch
                input_ids = input_ids.to(self._device)
                num_tokens += input_ids.numel()
                labels = labels.to(self._device)
                logits = self._model(input_ids)
                # Shift so that tokens < n predict n
                logits = logits[..., :-1, :].contiguous()
                labels = labels[..., 1:].contiguous()
                logits = logits.transpose(1, 2)
                # Compute loss
                loss = self._loss_fn(logits, labels)

                loss = loss / self._gradient_accumulation_steps
                running_loss += loss
                loss.backward()

                # Step with optimizer
                if (idx + 1) % self._gradient_accumulation_steps == 0:
                    if not self._optimizer_in_bwd:
                        self._optimizer.step()
                        self._optimizer.zero_grad(set_to_none=True)

                    self.global_step += 1

                    loss_to_log = running_loss.item()
                    pbar.update(1)
                    pbar.set_description(
                        f"{curr_epoch+1}|{self.global_step}|Loss: {loss_to_log}"
                    )

                    # Log per-step metrics
                    if self.global_step % self._log_every_n_steps == 0:
                        time_per_step = time.perf_counter() - t0
                        log_dict = {
                            "loss": loss_to_log,
                            # NOTE: for optim in backward, this assumes all optimizers have the same LR. This is currently
                            # true since we don't expose the ability to configure this yet.
                            "lr": (
                                self._optim_ckpt_wrapper.get_optim_key("lr")
                                if self._optimizer_in_bwd
                                else self._optimizer.param_groups[0]["lr"]
                            ),
                            "tokens_per_second": num_tokens / time_per_step,
                        }
                        if self._device.type == "cuda" and self._log_peak_memory_stats:
                            log_dict.update(utils.get_memory_stats(device=self._device))
                        self._metric_logger.log_dict(
                            log_dict,
                            step=self.global_step,
                        )

                    # Reset running stats for the next step
                    running_loss = 0
                    num_tokens = 0
                    t0 = time.perf_counter()

            self.epochs_run += 1
            self.save_checkpoint(epoch=curr_epoch)

    def cleanup(self) -> None:
        self._metric_logger.close()


@config.parse
def recipe_main(cfg: DictConfig) -> None:
    """
    Entry point for the recipe.

    Configurable parameters are read in the following order:
        - Parameters specified in config (see available configs through ``tune ls``)
        - Overwritten by arguments from the command-line
    """
    config.log_config(recipe_name="FullFinetuneRecipeSingleDevice", cfg=cfg)
    recipe = FullFinetuneRecipeSingleDevice(cfg=cfg)
    recipe.setup(cfg=cfg)
    recipe.train()
    recipe.cleanup()


if __name__ == "__main__":
    sys.exit(recipe_main())