You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hallo zusammen,
eine paar Frage aus reiner Unwissenheit:
Wie verhält sich das Abfrageintervall wenn ich 2 HM800 WR laufen habe von denen ich den einen Regeln will und den anderen nur abrufen möchte (wegen der Einbindung an den Homeassistant via MQTT).
Wenn ich als Intervall z.B. 5 Sec einstelle wird dann jeder WR alle 5 Sec abgerufen (sprich läuft die Kommunikation dann in 2 paralellen Threads) oder läuft das sequentiell, sodaß jeder WR effektiv nur alle 10 Sec dran ist ? ( Mein Problem dabei ist, daß ich oft so was drin habe
17:39:03.532 > Middle missing
17:39:03.580 > Request retransmit: 1
und dadurch das Intervall bis zur Regelung noch länger wird. Bin noch auf der Suche nach der optimalen Position der DTU für beide WR in Verbindung mit der Sendeleistung)
Kann es sein, daß dieser MQTT Wert (solar/opendtulan/114190139135/status/last_update)
keinen automatisch erkennbaren Sensor im Homeassistant erzeugt ?
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hallo zusammen,
eine paar Frage aus reiner Unwissenheit:
Wie verhält sich das Abfrageintervall wenn ich 2 HM800 WR laufen habe von denen ich den einen Regeln will und den anderen nur abrufen möchte (wegen der Einbindung an den Homeassistant via MQTT).
17:39:03.532 > Middle missing
17:39:03.580 > Request retransmit: 1
und dadurch das Intervall bis zur Regelung noch länger wird. Bin noch auf der Suche nach der optimalen Position der DTU für beide WR in Verbindung mit der Sendeleistung)
keinen automatisch erkennbaren Sensor im Homeassistant erzeugt ?
Beta Was this translation helpful? Give feedback.
All reactions