Fix ESP32-S2 peripheral register address range (GCC-335) #3

wnienhaus · 2023-07-29T10:52:38Z

As per ESP32-S2 Technical Reference Manual (TRM) v1.1, the base address for the peripheral registers on the ESP32-S2 is 0x3f408000 instead of 0x3ff48000 (as it was on the original ESP32). See Table 10 on page 48, and also also Figure 3-1 on page 110.

See also the include file in the ESP-IDF, which also uses 0x3f408000 instead of 0x3ff48000.

As per ESP32-S2 Technical Reference Manual (TRM) v1.1, Table 10 on page 48, and also also Figure 3-1 on page 110, the base address for the peripheral registers on the ESP32-S2 is 0x3f408000 instead of 0x3ff48000 (as it was on the original ESP32). See also the include file in the ESP-IDF (at: https://github.com/espressif/esp-idf/blob/v5.0.2/components/soc/esp32s2/include/soc/reg_base.h#L31), which also uses 0x3f408000 instead of 0x3ff48000.

wnienhaus · 2023-08-08T07:58:48Z

Small update on this: Given that mcpu esp32s2 is also used for the S3, this PR is not entirely "complete". Some solution for validating peripheral register addresses of the S3 (0x60008000 instead of 0x3f408000) will be needed.

Commit be6276e "Allow debugging of runtime loader / dynamic linker" introduced a small regression when stepping into the runtime loader / dynamic linker from function we do not have debug information for. This is reported in PR/29747. This can be shown by the following example (given by Simon Marchi in buzilla bug report): $ cat test.c #include <stdio.h> int main() { printf("Hi\n"); return 0; } $ gcc test.c -O0 -o test $ ./gdb -q -nx --data-directory=data-directory test -ex start -ex s Reading symbols from test... (No debugging symbols found in test) Temporary breakpoint 1 at 0x1151 Starting program: .../binutils-gdb/gdb/test [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Temporary breakpoint 1, 0x0000555555555151 in main () Single stepping until exit from function main, which has no line number information. /home/smarchi/src/binutils-gdb/gdb/infrun.c:6960:64: runtime error: member call on null pointer of type 'struct symbol' The crash happens here: #0 __sanitizer::Die () at ../../../../src/libsanitizer/sanitizer_common/sanitizer_termination.cpp:50 #1 0x00007ffff5dd7128 in __ubsan::__ubsan_handle_type_mismatch_v1_abort (Data=<optimized out>, Pointer=<optimized out>) at ../../../../src/libsanitizer/ubsan/ubsan_handlers.cpp:148 #2 0x000055556183e1a7 in process_event_stop_test (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6960 #3 0x0000555561838ea4 in handle_signal_stop (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:6615 bminor#4 0x000055556182f77b in handle_inferior_event (ecs=0x7fffffffccd0) at .../binutils-gdb/gdb/infrun.c:5866 When evaluating: 6956 if (execution_direction != EXEC_REVERSE 6957 && ecs->event_thread->control.step_over_calls == STEP_OVER_UNDEBUGGABLE 6958 && in_solib_dynsym_resolve_code (ecs->event_thread->stop_pc ()) 6959 && !in_solib_dynsym_resolve_code ( 6961 ecs->event_thread->control.step_start_function->value_block () 6962 ->entry_pc ())) we dereference, ecs->event_thread->control.step_start_function which is nullptr. This patch changes this condition so it evaluates to true if ecs->event_thread->control.step_start_function is nullptr since this matches the behaviour before be6276e. Tested on ubuntu-22.04 x86_64. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29747 Reviewed-By: Bruno Larsen <blarsen@redhat.com> Approved-By: Kevin Buettner <kevinb@redhat.com>

On x86_64-windows, since 04e2ac7, we observe this internal error: [...]/gdbsupport/intrusive_list.h:458: internal-error: erase_element: Assertion `elem_node->prev != INTRUSIVE_LIST_UNLINKED_VALUE' failed. Breaking in the destructors for intrusive_list and frame_info_ptr shows that in this configuration, the destructors for frame.c's statically-stored objects are run before frame-info.c's: Thread 1 hit Breakpoint 7, intrusive_list<frame_info_ptr, intrusive_base_node<frame_info_ptr> >::~intrusive_list (this=0x7ff69c418c90 <frame_info_ptr::frame_list>, __in_chrg=<optimized out>) [...]/../gdbsupport/intrusive_list.h:250 250 clear (); (gdb) bt #0 intrusive_list<frame_info_ptr, intrusive_base_node<frame_info_ptr> > ::~intrusive_list (this=0x7ff69c418c90 <frame_info_ptr::frame_list>, __in_chrg=<optimized out>) [...]/../gdbsupport/intrusive_list.h:250 #1 0x00007ff69b78edba in __tcf_1 () [...]/frame-info.c:27 #2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from C:\Windows\System32\msvcrt.dll #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00) [...]/main.c:1111 bminor#4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320 bminor#5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345 bminor#6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32 (gdb) c Continuing. Thread 1 hit Breakpoint 8, frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 <selected_frame>, __in_chrg=<optimized out>) [...]/frame-info.h:74 74 if (is_linked ()) (gdb) bt #0 frame_info_ptr::~frame_info_ptr (this=0x7ff69c418e20 <selected_frame>, __in_chrg=<optimized out>) [...]/frame-info.h:74 #1 0x00007ff69b79a643 in __tcf_1 () [...]/frame.c:1675 #2 0x00007ff9c457aa9f in msvcrt!_initterm_e () from C:\Windows\System32\msvcrt.dll #3 0x00007ff69b8246a6 in captured_main_1 (context=0x5ffe00) [...]/main.c:1111 bminor#4 0x00007ff69b825149 in captured_main (data=0x5ffe00) [...]/main.c:1320 bminor#5 0x00007ff69b8251b1 in gdb_main (args=0x5ffe00) [...]/main.c:1345 bminor#6 0x00007ff69b5d1730 in main (argc=2, argv=0x751730) [...]/gdb.c:32 Approved-By: Simon Marchi <simon.marchi@efficios.com>

This commit addresses one of the issues identified in PR gdb/28275. Bug gdb/28275 identifies a number of situations in which this assert: Assertion `!proc_target->commit_resumed_state' failed. could be triggered. There's actually a number of similar places where this assert is found in GDB, the two of interest in gdb/28275 are in target_wait and target_stop. In one of the comments: https://sourceware.org/bugzilla/show_bug.cgi?id=28275#c1 steps to trigger the assertion within target_stop were identified when using a modified version of the gdb.threads/detach-step-over.exp test script. In the gdb.threads/detach-step-over.exp test, we attach to a multi-threaded inferior, and continue the inferior in asynchronous (background) mode. Each thread is continuously hitting a conditional breakpoint where the condition is always false. While the inferior is running we detach. The goal is that we detach while GDB is performing a step-over for the conditional breakpoint in at least one thread. While detaching, if a step-over is in progress, then GDB has to complete the step over before we can detach. This involves calling target_stop and target_wait (see prepare_for_detach). As far as gdb/28275 is concerned, the interesting part here, is the the process_stratum_target::commit_resumed_state variable must be false when target_stop and target_wait are called. This is currently ensured because, in detach_command (infrun.c), we create an instance of scoped_disable_commit_resumed, this ensures that when target_detach is called, ::commit_resumed_state will be false. The modification to the test that I propose here, and which exposed the bug, is that, instead of using "detach" to detach from the inferior, we instead use "quit". Quitting GDB after attaching to an inferior will cause GDB to first detach, and then exit. When we quit GDB we end up calling target_detach via a different code path, the stack looks like: #0 target_detach #1 kill_or_detach #2 quit_force #3 quit_command Along this path there is no scoped_disable_commit_resumed created. ::commit_resumed_state can be true when we reach prepare_for_detach, which calls target_wait and target_stop, so the assertion will trigger. In this commit, I propose fixing this by adding the creation of a scoped_disable_commit_resumed into target_detach. This will ensure that ::commit_resumed_state is false when calling prepare_for_detach from within target_detach. I did consider placing the scoped_disable_commit_resumed in prepare_for_detach, however, placing it in target_detach ensures that the target's commit_resumed_state flag is left to false if the detached inferior was the last one for that target. It's the same rationale as for patch "gdb: disable commit resumed in target_kill" that comes later in this series, but for detach instead of kill. detach_command still includes a scoped_disable_commit_resumed too, but I think it is still relevant to cover the resumption at the end of the function. Co-Authored-By: Simon Marchi <simon.marchi@efficios.com> Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275 Change-Id: Ie128f7aba6ef0e018859275eca372e6ea738e96f

New in this version: add a dedicated test. When I do this: $ ./gdb -nx --data-directory=data-directory -q \ /bin/sleep \ -ex "maint set target-non-stop on" \ -ex "tar ext :1234" \ -ex "set remote exec-file /bin/sleep" \ -ex "run 1231 &" \ -ex add-inferior \ -ex "inferior 2" Reading symbols from /bin/sleep... (No debugging symbols found in /bin/sleep) Remote debugging using :1234 Starting program: /bin/sleep 1231 Reading /lib64/ld-linux-x86-64.so.2 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading /usr/lib/debug/.build-id/a6/7a1408f18db3576757eea210d07ba3fc560dff.debug from remote target... [New inferior 2] Added inferior 2 on connection 1 (extended-remote :1234) [Switching to inferior 2 [<null>] (<noexec>)] (gdb) Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target... attach 3659848 Attaching to process 3659848 /home/smarchi/src/binutils-gdb/gdb/thread.c:85: internal-error: inferior_thread: Assertion `current_thread_ != nullptr' failed. Note the "attach" command just above. When doing it on the command-line with a -ex switch, the bug doesn't trigger. The internal error of GDB is actually caused by GDBserver crashing, and the error recovery of GDB is not on point. This patch aims to fix just the GDBserver crash, not the GDB problem. GDBserver crashes with a segfault here: (gdb) bt #0 0x00005555557fb3f4 in find_one_thread (ptid=...) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:177 #1 0x00005555557fd5cf in thread_db_thread_handle (ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/thread-db.cc:461 #2 0x000055555578a0b6 in linux_process_target::thread_handle (this=0x5555558a64c0 <the_x86_target>, ptid=<error reading variable: Cannot access memory at address 0xffffffffffffffa0>, handle=0x7fffffffc400, handle_len=0x7fffffffc3f0) at /home/smarchi/src/binutils-gdb/gdbserver/linux-low.cc:6905 #3 0x00005555556dfcc6 in handle_qxfer_threads_worker (thread=0x60b000000510, buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1645 bminor#4 0x00005555556e00e6 in operator() (__closure=0x7fffffffc5e0, thread=0x60b000000510) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1696 bminor#5 0x00005555556f54be in for_each_thread<handle_qxfer_threads_proper(buffer*)::<lambda(thread_info*)> >(struct {...}) (func=...) at /home/smarchi/src/binutils-gdb/gdbserver/gdbthread.h:159 bminor#6 0x00005555556e0242 in handle_qxfer_threads_proper (buffer=0x7fffffffc8a0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1694 bminor#7 0x00005555556e04ba in handle_qxfer_threads (annex=0x629000000213 "", readbuf=0x621000019100 '\276' <repeats 200 times>..., writebuf=0x0, offset=0, len=4097) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:1732 bminor#8 0x00005555556e1989 in handle_qxfer (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2045 bminor#9 0x00005555556e720a in handle_query (own_buf=0x629000000200 "qXfer:threads", packet_len=26, new_packet_len_p=0x7fffffffd630) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:2685 bminor#10 0x00005555556f1a01 in process_serial_event () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4176 bminor#11 0x00005555556f4457 in handle_serial_event (err=0, client_data=0x0) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4514 bminor#12 0x0000555555820f56 in handle_file_event (file_ptr=0x607000000250, ready_mask=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:573 #13 0x0000555555821895 in gdb_wait_for_event (block=1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:694 #14 0x000055555581f533 in gdb_do_one_event (mstimeout=-1) at /home/smarchi/src/binutils-gdb/gdbsupport/event-loop.cc:264 #15 0x00005555556ec9fb in start_event_loop () at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3512 #16 0x00005555556f0769 in captured_main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:3992 #17 0x00005555556f0e3f in main (argc=4, argv=0x7fffffffe0d8) at /home/smarchi/src/binutils-gdb/gdbserver/server.cc:4078 The reason is a wrong current process when find_one_thread is called. The current process is the 2nd one, which was just attached. It does not yet have thread_db data (proc->priv->thread_db is nullptr). As we iterate on all threads of all process to fulfull the qxfer:threads:read request, we get to a thread of process 1 for which we haven't read thread_db information yet (lwp_info::thread_known is false), so we get into find_one_thread. find_one_thread uses `current_processÂ ()->priv->thread_db`, assuming the current process matches the ptid passed as a parameter, which is wrong. A segfault happens when trying to dereference that thread_db pointer. Fix this by making find_one_thread not assume what the current process / current thread is. If it needs to call into libthread_db, which we know will try to read memory from the current process, then temporarily set the current process. In the case where the thread is already know and we return early, we don't need to switch process. Add a test to reproduce this specific situation. Change-Id: I09b00883e8b73b7e5f89d0f47cb4e9c0f3d6caaa Approved-By: Andrew Burgess <aburgess@redhat.com>

New in this version: - Better comment in target_kill - Uncomment line in test to avoid hanging when exiting, when testing on native-extended-gdbserver PR 28275 shows that doing a sequence of: - Run inferior in background (run &) - kill that inferior - Run again We get into this assertion: /home/smarchi/src/binutils-gdb/gdb/target.c:2590: internal-error: target_wait: Assertion `!proc_target->commit_resumed_state' failed. #0 internal_error_loc (file=0x5606b344e740 "/home/smarchi/src/binutils-gdb/gdb/target.c", line=2590, fmt=0x5606b344d6a0 "%s: Assertion `%s' failed.") at /home/smarchi/src/binutils-gdb/gdbsupport/errors.cc:54 #1 0x00005606b6296475 in target_wait (ptid=..., status=0x7fffb9390630, options=...) at /home/smarchi/src/binutils-gdb/gdb/target.c:2590 #2 0x00005606b5767a98 in startup_inferior (proc_target=0x5606bfccb2a0 <the_amd64_linux_nat_target>, pid=3884857, ntraps=1, last_waitstatus=0x0, last_ptid=0x0) at /home/smarchi/src/binutils-gdb/gdb/nat/fork-inferior.c:482 #3 0x00005606b4e6c9c5 in gdb_startup_inferior (pid=3884857, num_traps=1) at /home/smarchi/src/binutils-gdb/gdb/fork-child.c:132 bminor#4 0x00005606b50f14a5 in inf_ptrace_target::create_inferior (this=0x5606bfccb2a0 <the_amd64_linux_nat_target>, exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/inf-ptrace.c:105 bminor#5 0x00005606b53b6d23 in linux_nat_target::create_inferior (this=0x5606bfccb2a0 <the_amd64_linux_nat_target>, exec_file=0x604000039f50 "/home/smarchi/build/binutils-gdb/gdb/test", allargs="", env=0x61500000a580, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/linux-nat.c:978 bminor#6 0x00005606b512b79b in run_command_1 (args=0x0, from_tty=1, run_how=RUN_NORMAL) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:468 bminor#7 0x00005606b512c236 in run_command (args=0x0, from_tty=1) at /home/smarchi/src/binutils-gdb/gdb/infcmd.c:526 When running the kill command, commit_resumed_state for the process_stratum_target (linux-nat, here) is true. After the kill, when there are no more threads, commit_resumed_state is still true, as nothing touches this flag during the kill operation. During the subsequent run command, run_command_1 does: scoped_disable_commit_resumed disable_commit_resumed ("running"); We would think that this would clear the commit_resumed_state flag of our native target, but that's not the case, because scoped_disable_commit_resumed iterates on non-exited inferiors in order to find active process targets. And after the kill, the inferior is exited, and the native target was unpushed from it anyway. So scoped_disable_commit_resumed doesn't touch the commit_resumed_state flag of the native target, it stays true. When reaching target_wait, in startup_inferior (to consume the initial expect stop events while the inferior is starting up and working its way through the shell), commit_resumed_state is true, breaking the contract saying that commit_resumed_state is always false when calling the targets' wait method. (note: to be correct, I think that startup_inferior should toggle commit_resumed between the target_wait and target_resume calls, but I'll ignore that for now) I can see multiple ways to fix this. In the end, we need commit_resumed_state to be cleared by the time we get to that target_wait. It could be done at the end of the kill command, or at the beginning of the run command. To keep things in a coherent state, I'd like to make it so that after the kill command, when the target is left with no threads, its commit_resumed_state flag is left to false. This way, we can keep working with the assumption that a target with no threads (and therefore no running threads) has commit_resumed_state == false. Do this by adding a scoped_disable_commit_resumed in target_kill. It clears the target's commit_resumed_state on entry, and leaves it false if the target does not have any resumed thread on exit. That means, even if the target has another inferior with stopped threads, commit_resumed_state will be left to false, which makes sense. Add a test that tries to cover various combinations of actions done while an inferior is running (and therefore while commit_resumed_state is true on the process target). Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28275 Change-Id: I8e6fe6dc1f475055921520e58cab68024039a1e9 Approved-By: Andrew Burgess <aburgess@redhat.com>

Bug gdb/29712 identifies a problem with the Python disassembler API. In some cases GDB will try to throw an exception through the libopcodes disassembler code, however, not all targets include exception unwind information when compiling C code, for targets that don't include this information GDB will terminate when trying to pass the exception through libopcodes. To explain what GDB is trying to do, consider the following trivial use of the Python disassembler API: class ExampleDisassembler(gdb.disassembler.Disassembler): class MyInfo(gdb.disassembler.DisassembleInfo): def __init__(self, info): super().__init__(info) def read_memory(self, length, offset): return super().read_memory(length, offset) def __init__(self): super().__init__("ExampleDisassembler") def __call__(self, info): info = self.MyInfo(info) return gdb.disassembler.builtin_disassemble(info) This disassembler doesn't add any value, it defers back to GDB to do all the actual work, but it serves to allow us to discuss the problem. The problem occurs when a Python exception is raised by the MyInfo.read_memory method. The MyInfo.read_memory method is called from the C++ function gdbpy_disassembler::read_memory_func. The C++ stack at the point this function is called looks like this: #0 gdbpy_disassembler::read_memory_func (memaddr=4198805, buff=0x7fff9ab9d2a8 "\220ӹ\232\377\177", len=1, info=0x7fff9ab9d558) at ../../src/gdb/python/py-disasm.c:510 #1 0x000000000104ba06 in fetch_data (info=0x7fff9ab9d558, addr=0x7fff9ab9d2a9 "ӹ\232\377\177") at ../../src/opcodes/i386-dis.c:305 #2 0x000000000104badb in ckprefix (ins=0x7fff9ab9d100) at ../../src/opcodes/i386-dis.c:8571 #3 0x000000000104e28e in print_insn (pc=4198805, info=0x7fff9ab9d558, intel_syntax=-1) at ../../src/opcodes/i386-dis.c:9548 bminor#4 0x000000000104f4d4 in print_insn_i386 (pc=4198805, info=0x7fff9ab9d558) at ../../src/opcodes/i386-dis.c:9949 bminor#5 0x00000000004fa7ea in default_print_insn (memaddr=4198805, info=0x7fff9ab9d558) at ../../src/gdb/arch-utils.c:1033 bminor#6 0x000000000094fe5e in i386_print_insn (pc=4198805, info=0x7fff9ab9d558) at ../../src/gdb/i386-tdep.c:4072 bminor#7 0x0000000000503d49 in gdbarch_print_insn (gdbarch=0x5335560, vma=4198805, info=0x7fff9ab9d558) at ../../src/gdb/gdbarch.c:3351 bminor#8 0x0000000000bcc8c6 in disasmpy_builtin_disassemble (self=0x7f2ab07f54d0, args=0x7f2ab0789790, kw=0x0) at ../../src/gdb/python/py-disasm.c:324 ### ... snip lots of frames as we pass through Python itself ... #22 0x0000000000bcd860 in gdbpy_print_insn (gdbarch=0x5335560, memaddr=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/python/py-disasm.c:783 #23 0x00000000008995a5 in ext_lang_print_insn (gdbarch=0x5335560, address=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/extension.c:939 #24 0x0000000000741aaa in gdb_print_insn_1 (gdbarch=0x5335560, vma=0x401195, info=0x7fff9ab9e3c8) at ../../src/gdb/disasm.c:1078 #25 0x0000000000741bab in gdb_disassembler::print_insn (this=0x7fff9ab9e3c0, memaddr=0x401195, branch_delay_insns=0x0) at ../../src/gdb/disasm.c:1101 So gdbpy_disassembler::read_memory_func is called from the libopcodes disassembler to read memory, this C++ function then calls into user supplied Python code to do the work. If the user supplied Python code raises an gdb.MemoryError exception indicating the memory read failed, this is fine. The C++ code converts this exception back into a return value that libopcodes can understand, and returns to libopcodes. However, if the user supplied Python code raises some other exception, what we want is for this exception to propagate through GDB and appear as if raised by the call to gdb.disassembler.builtin_disassemble. To achieve this, when gdbpy_disassembler::read_memory_func spots an unknown Python exception, we must pass the information about this exception from frame #0 to frame bminor#8 in the above backtrace. Frame bminor#8 is the C++ implementation of gdb.disassembler.builtin_disassemble, and so it is this function that we want to re-raise the unknown Python exception, so the user can, if they want, catch the exception in their code. The previous mechanism by which the exception was passed was to pack the details of the Python exception into a C++ exception, then throw the exception from frame #0, and catch the exception in frame bminor#8, unpack the details of the Python exception, and re-raise it. However, this relies on the exception passing through frames #1 to bminor#7, some of which are in libopcodes, which is C code, and so, might not be compiled with exception support. This commit proposes an alternative solution that does not rely on throwing a C++ exception. When we spot an unhandled Python exception in frame #0, we will store the details of this exception within the gdbpy_disassembler object currently in use. Then we return to libopcodes a value indicating that the memory_read failed. libopcodes will now continue to disassemble as though that memory read failed (with one special case described below), then, when we eventually return to disasmpy_builtin_disassemble we check to see if there is an exception stored in the gdbpy_disassembler object. If there is then this exception can immediately be installed, and then we return back to Python, when the user will be able to catch the exception. There is one extra change in gdbpy_disassembler::read_memory_func. After the first call that results in an exception being stored on the gdbpy_disassembler object, any future calls to the ::read_memory_func function will immediately return as if the read failed. This avoids any additional calls into user supplied Python code. My thinking here is that should the first call fail with some unknown error, GDB should not keep trying with any additional calls. This maintains the illusion that the exception raised from MyInfo.read_memory is immediately raised by gdb.disassembler.builtin_disassemble. I have no tests for this change though - to trigger this issue would rely on a libopcodes disassembler that will try to read further memory even after the first failed read. I'm not aware of any such disassembler that currently does this, but that doesn't mean such a disassembler couldn't exist in the future. With this change in place the gdb.python/py-disasm.exp test should now pass on AArch64. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29712 Approved-By: Simon Marchi <simon.marchi@efficios.com>

On Ubuntu 22.04.1 x86_64 (with glibc 2.35), I run into: ... (gdb) PASS: gdb.base/corefile.exp: $_exitcode is void bt^M #0 __pthread_kill_implementation (...) at ./nptl/pthread_kill.c:44^M #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M #2 __GI___pthread_kill (...) at ./nptl/pthread_kill.c:89^M #3 0x00007f4985e1a476 in __GI_raise (...) at ../sysdeps/posix/raise.c:26^M bminor#4 0x00007f4985e007f3 in __GI_abort () at ./stdlib/abort.c:79^M bminor#5 0x0000556b4ea4b504 in func2 () at gdb.base/coremaker.c:153^M bminor#6 0x0000556b4ea4b516 in func1 () at gdb.base/coremaker.c:159^M bminor#7 0x0000556b4ea4b578 in main (...) at gdb.base/coremaker.c:171^M (gdb) PASS: gdb.base/corefile.exp: backtrace up^M #1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M 78 in ./nptl/pthread_kill.c^M (gdb) FAIL: gdb.base/corefile.exp: up ... The problem is that the regexp used here: ... gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \$.*\$.*" "up" ... does not fit the __pthread_kill_internal line which lacks the instruction address due to inlining. Fix this by making the regexp less strict. Tested on x86_64-linux.

Closes #3

As per ESP32-S2 ULP coprocessor instruction set documentation, all JUMP family instructions expect the address argument in 32-bit words. For immediate values, JUMP and JUMPR do this as per documentation. In other words an offset given in the assembly source in bytes is correctly converted to 32-bit words (by doing >>2) when creating the binary instruction. With JUMPS however any value given in the assembly source file is kept as-is when creating the binary instruction. Thus for example 4 bytes specified in the source will stay 4 (32-bit words) in the binary instruction, instead of 1 (32-bit word). This commit fixes that behaviour. This also aligns the behaviour with that of the ESP32 (not S2) assembler, where this already worked correctly. This change was tested on an actual ESP32-S2 with the following code: ``` .data val: .long 0 .text entry: move r3, val jumps 4, 42, lt right: move r0, 66 # correct jump jump end nop wrong: move r0, 73 # incorrect jump nop end: st r0, r3, 0 halt ``` Before the fix, the JUMPS instruction jumped 4 instructions forward, and "val" was set to 73. After the fix JUMPS correctly jumped 1 instruction forward (4 bytes = 1 word), and "val" was set to 66. Closes #3

Closes #3

As per ESP32-S2 ULP coprocessor instruction set documentation, all JUMP family instructions expect the address argument in 32-bit words. For immediate values, JUMP and JUMPR do this as per documentation. In other words an offset given in the assembly source in bytes is correctly converted to 32-bit words (by doing >>2) when creating the binary instruction. With JUMPS however any value given in the assembly source file is kept as-is when creating the binary instruction. Thus for example 4 bytes specified in the source will stay 4 (32-bit words) in the binary instruction, instead of 1 (32-bit word). This commit fixes that behaviour. This also aligns the behaviour with that of the ESP32 (not S2) assembler, where this already worked correctly. This change was tested on an actual ESP32-S2 with the following code: ``` .data val: .long 0 .text entry: move r3, val jumps 4, 42, lt right: move r0, 66 # correct jump jump end nop wrong: move r0, 73 # incorrect jump nop end: st r0, r3, 0 halt ``` Before the fix, the JUMPS instruction jumped 4 instructions forward, and "val" was set to 73. After the fix JUMPS correctly jumped 1 instruction forward (4 bytes = 1 word), and "val" was set to 66. Closes #3

Closes #3

As per ESP32-S2 ULP coprocessor instruction set documentation, all JUMP family instructions expect the address argument in 32-bit words. For immediate values, JUMP and JUMPR do this as per documentation. In other words an offset given in the assembly source in bytes is correctly converted to 32-bit words (by doing >>2) when creating the binary instruction. With JUMPS however any value given in the assembly source file is kept as-is when creating the binary instruction. Thus for example 4 bytes specified in the source will stay 4 (32-bit words) in the binary instruction, instead of 1 (32-bit word). This commit fixes that behaviour. This also aligns the behaviour with that of the ESP32 (not S2) assembler, where this already worked correctly. This change was tested on an actual ESP32-S2 with the following code: ``` .data val: .long 0 .text entry: move r3, val jumps 4, 42, lt right: move r0, 66 # correct jump jump end nop wrong: move r0, 73 # incorrect jump nop end: st r0, r3, 0 halt ``` Before the fix, the JUMPS instruction jumped 4 instructions forward, and "val" was set to 73. After the fix JUMPS correctly jumped 1 instruction forward (4 bytes = 1 word), and "val" was set to 66. Closes #3

Closes #3

As per ESP32-S2 ULP coprocessor instruction set documentation, all JUMP family instructions expect the address argument in 32-bit words. For immediate values, JUMP and JUMPR do this as per documentation. In other words an offset given in the assembly source in bytes is correctly converted to 32-bit words (by doing >>2) when creating the binary instruction. With JUMPS however any value given in the assembly source file is kept as-is when creating the binary instruction. Thus for example 4 bytes specified in the source will stay 4 (32-bit words) in the binary instruction, instead of 1 (32-bit word). This commit fixes that behaviour. This also aligns the behaviour with that of the ESP32 (not S2) assembler, where this already worked correctly. This change was tested on an actual ESP32-S2 with the following code: ``` .data val: .long 0 .text entry: move r3, val jumps 4, 42, lt right: move r0, 66 # correct jump jump end nop wrong: move r0, 73 # incorrect jump nop end: st r0, r3, 0 halt ``` Before the fix, the JUMPS instruction jumped 4 instructions forward, and "val" was set to 73. After the fix JUMPS correctly jumped 1 instruction forward (4 bytes = 1 word), and "val" was set to 66. Closes #3

With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... (gdb) show index-cache enabled The index cache is off. (gdb) PASS: gdb.base/index-cache.exp: test_basic_stuff: index-cache is disabled by default set index-cache enabled on ================== WARNING: ThreadSanitizer: data race (pid=32248) Write of size 1 at 0x00000321f540 by main thread: #0 index_cache::enable() gdb/dwarf2/index-cache.c:76 (gdb+0x82cfdd) #1 set_index_cache_enabled_command gdb/dwarf2/index-cache.c:270 (gdb+0x82d9af) #2 bool setting::set<bool>(bool const&) gdb/command.h:353 (gdb+0x6fe5f2) #3 do_set_command(char const*, int, cmd_list_element*) gdb/cli/cli-setshow.c:414 (gdb+0x6fcd21) bminor#4 execute_command(char const*, int) gdb/top.c:567 (gdb+0xff2e64) bminor#5 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94acc0) bminor#6 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b37d) bminor#7 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x103467e) bminor#8 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a265) bminor#9 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bdd3f) bminor#10 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a064) bminor#11 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a125) bminor#12 stdin_event_handler gdb/ui.c:155 (gdb+0x1074922) #13 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d94de4) #14 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d9551c) #15 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93908) #16 start_event_loop gdb/main.c:412 (gdb+0xb5a256) #17 captured_command_loop gdb/main.c:476 (gdb+0xb5a445) #18 captured_main gdb/main.c:1320 (gdb+0xb5c5c5) #19 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c674) #20 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x00000321f540 by thread T12: #0 index_cache::enabled() const gdb/dwarf2/index-cache.h:48 (gdb+0x82e1a6) #1 index_cache::store(dwarf2_per_bfd*) gdb/dwarf2/index-cache.c:94 (gdb+0x82d0bc) #2 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:638 (gdb+0x7f1b97) #3 operator() gdb/dwarf2/cooked-index.c:468 (gdb+0x7f0f24) bminor#4 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f285b) bminor#5 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#6 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#7 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#8 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#9 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#10 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#11 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) bminor#12 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #13 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #14 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #15 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #18 pthread_once <null> (libtsan.so.0+0x4457c) #19 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #20 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #21 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #22 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #23 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac492) #24 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabdb4) #25 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dace63) #26 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac294) #27 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf5c6) #28 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf551) #29 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf506) #30 <null> <null> (libstdc++.so.6+0xdcac2) Location is global 'global_index_cache' of size 48 at 0x00000321f520 (gdb+0x00000321f540) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/index-cache.c:76 in index_cache::enable() ... The race happens when issuing a "file $exec" command followed by a "set index-cache enabled on" command. The race is between: - a worker thread reading index_cache::m_enabled to determine whether an index-cache entry for $exec needs to be written (due to command "file $exec"), and - the main thread setting index_cache::m_enabled (due to command "set index-cache enabled on"). Fix this by capturing the value of index_cache::m_enabled in the main thread, and using the captured value in the worker thread. Tested on x86_64-linux. PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392

With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=12261) Write of size 4 at 0x7b4400097d08 by main thread: #0 bfd_open_file bfd/cache.c:584 (gdb+0x148bb92) #1 bfd_cache_lookup_worker bfd/cache.c:261 (gdb+0x148b12a) #2 cache_bseek bfd/cache.c:289 (gdb+0x148b324) #3 bfd_seek bfd/bfdio.c:459 (gdb+0x1489c31) bminor#4 _bfd_generic_get_section_contents bfd/libbfd.c:1069 (gdb+0x14977a4) bminor#5 bfd_get_section_contents bfd/section.c:1606 (gdb+0x149cc7c) bminor#6 gdb_bfd_scan_elf_dyntag(int, bfd*, unsigned long*, unsigned long*) gdb/solib.c:1601 (gdb+0xed8eca) bminor#7 elf_locate_base gdb/solib-svr4.c:705 (gdb+0xec28ac) bminor#8 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3430 (gdb+0xeca55d) bminor#9 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) bminor#10 find_main_name gdb/symtab.c:6270 (gdb+0xf743a5) bminor#11 main_language() gdb/symtab.c:6313 (gdb+0xf74499) bminor#12 set_initial_language() gdb/symfile.c:1700 (gdb+0xf4285c) #13 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf40e2a) #14 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf427d1) #15 file_command gdb/exec.c:554 (gdb+0x94f74b) #16 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #17 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #18 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff303c) #19 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94adde) #20 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b49b) #21 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x103479c) #22 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a383) #23 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bde5d) #24 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a182) #25 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a243) #26 stdin_event_handler gdb/ui.c:155 (gdb+0x1074a40) #27 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d94f02) #28 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d9563a) #29 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93a26) #30 start_event_loop gdb/main.c:412 (gdb+0xb5a374) #31 captured_command_loop gdb/main.c:476 (gdb+0xb5a563) #32 captured_main gdb/main.c:1320 (gdb+0xb5c6e3) #33 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c792) #34 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b4400097d08 by thread T12: #0 bfd_check_format_matches bfd/format.c:323 (gdb+0x1492db4) #1 bfd_check_format bfd/format.c:94 (gdb+0x1492104) #2 build_id_bfd_get(bfd*) gdb/build-id.c:42 (gdb+0x6648f7) #3 index_cache::store(dwarf2_per_bfd*, index_cache_store_context*) gdb/dwarf2/index-cache.c:110 (gdb+0x82d205) bminor#4 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:640 (gdb+0x7f1bf1) bminor#5 operator() gdb/dwarf2/cooked-index.c:470 (gdb+0x7f0f40) bminor#6 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f28f7) bminor#7 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#8 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#9 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#10 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#11 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#12 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) #13 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #14 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #15 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #16 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #19 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #20 pthread_once <null> (libtsan.so.0+0x4457c) #21 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #22 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #23 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #24 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #25 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac5b0) #26 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabed2) #27 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dacf81) #28 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac3b2) #29 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf6e4) #30 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf66f) #31 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf624) #32 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race bfd/cache.c:584 in bfd_open_file ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread getting the build id while writing the index cache, and in the process reading bfd::format, and - the main thread calling find_main_name, and in the process setting bfd::cacheable. The two bitfields bfd::cacheable and bfd::format share the same bitfield container. Fix this by capturing the build id in the main thread, and using the captured value in the worker thread. Likewise for the dwz build id, which likely suffers from the same issue. While we're at it, also move the creation of the cache directory to the index_cache_store_context constructor, to: - make sure there's no race between subsequent file commands, and - issue any related warning or error messages during the file command. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392

With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=24296) Write of size 1 at 0x7b200000420d by main thread: #0 queue_comp_unit gdb/dwarf2/read.c:5564 (gdb+0x8939ce) #1 dw2_do_instantiate_symtab gdb/dwarf2/read.c:1754 (gdb+0x885b96) #2 dw2_instantiate_symtab gdb/dwarf2/read.c:1792 (gdb+0x885d86) #3 dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) gdb/dwarf2/read.c:3042 (gdb+0x88ac77) bminor#4 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16915 (gdb+0x8c1c8a) bminor#5 objfile::lookup_symbol(block_enum, char const*, domain_enum) gdb/symfile-debug.c:288 (gdb+0xf389a1) bminor#6 lookup_symbol_via_quick_fns gdb/symtab.c:2385 (gdb+0xf66403) bminor#7 lookup_symbol_in_objfile gdb/symtab.c:2516 (gdb+0xf66a67) bminor#8 operator() gdb/symtab.c:2562 (gdb+0xf66bbe) bminor#9 operator() gdb/../gdbsupport/function-view.h:305 (gdb+0xf76ffd) bminor#10 _FUN gdb/../gdbsupport/function-view.h:299 (gdb+0xf77054) bminor#11 gdb::function_view<bool (objfile*)>::operator()(objfile*) const gdb/../gdbsupport/function-view.h:289 (gdb+0xc3f5e3) bminor#12 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3455 (gdb+0xeca793) #13 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) #14 lookup_global_or_static_symbol gdb/symtab.c:2559 (gdb+0xf66e47) #15 lookup_global_symbol(char const*, block const*, domain_enum) gdb/symtab.c:2615 (gdb+0xf670cc) #16 language_defn::lookup_symbol_nonlocal(char const*, block const*, domain_enum) const gdb/symtab.c:2447 (gdb+0xf666ba) #17 lookup_symbol_aux gdb/symtab.c:2123 (gdb+0xf655ff) #18 lookup_symbol_in_language(char const*, block const*, domain_enum, language, field_of_this_result*) gdb/symtab.c:1931 (gdb+0xf646f7) #19 set_initial_language() gdb/symfile.c:1708 (gdb+0xf429c0) #20 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf40f54) #21 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf428fb) #22 file_command gdb/exec.c:554 (gdb+0x94f875) #23 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #24 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #25 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff3166) #26 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94af08) #27 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94b5c5) #28 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x10348c6) #29 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94a4ad) #30 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11bdf87) #31 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a2ac) #32 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94a36d) #33 stdin_event_handler gdb/ui.c:155 (gdb+0x1074b6a) #34 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d9502c) #35 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d95764) #36 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d93b50) #37 start_event_loop gdb/main.c:412 (gdb+0xb5a49e) #38 captured_command_loop gdb/main.c:476 (gdb+0xb5a68d) #39 captured_main gdb/main.c:1320 (gdb+0xb5c80d) #40 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5c8bc) #41 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b200000420d by thread T12: #0 write_gdbindex gdb/dwarf2/index-write.c:1229 (gdb+0x8310c8) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1484 (gdb+0x83232f) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context*) gdb/dwarf2/index-cache.c:177 (gdb+0x82d62b) #3 cooked_index::maybe_write_index(dwarf2_per_bfd*) gdb/dwarf2/cooked-index.c:640 (gdb+0x7f1bf7) bminor#4 operator() gdb/dwarf2/cooked-index.c:470 (gdb+0x7f0f40) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f2909) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dac6da) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dabffc) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dad0ab) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dac4dc) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1daf80e) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1daf799) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1daf74e) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:5564 in queue_comp_unit ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread expanding the CU containing main, and in the process setting dwarf2_per_cu_data::queued. The two bitfields dwarf2_per_cu_data::queue and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::queued a packed<bool, 1>. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392

…s_debug_type} With gdb build with -fsanitize=thread and test-case gdb.base/index-cache.exp and target board debug-types, I run into: ... (gdb) file build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache Reading symbols from build/gdb/testsuite/outputs/gdb.base/index-cache/index-cache... ================== WARNING: ThreadSanitizer: data race (pid=9654) Write of size 1 at 0x7b200000420d by main thread: #0 dwarf2_per_cu_data::get_header() const gdb/dwarf2/read.c:21513 (gdb+0x8d1eee) #1 dwarf2_per_cu_data::addr_size() const gdb/dwarf2/read.c:21524 (gdb+0x8d1f4e) #2 dwarf2_cu::addr_type() const gdb/dwarf2/cu.c:112 (gdb+0x806327) #3 set_die_type gdb/dwarf2/read.c:21932 (gdb+0x8d3870) bminor#4 read_base_type gdb/dwarf2/read.c:15448 (gdb+0x8bcacb) bminor#5 read_type_die_1 gdb/dwarf2/read.c:19832 (gdb+0x8cc0a5) bminor#6 read_type_die gdb/dwarf2/read.c:19767 (gdb+0x8cbe6d) bminor#7 lookup_die_type gdb/dwarf2/read.c:19739 (gdb+0x8cbdc7) bminor#8 die_type gdb/dwarf2/read.c:19593 (gdb+0x8cb68a) bminor#9 read_subroutine_type gdb/dwarf2/read.c:14648 (gdb+0x8b998e) bminor#10 read_type_die_1 gdb/dwarf2/read.c:19792 (gdb+0x8cbf2f) bminor#11 read_type_die gdb/dwarf2/read.c:19767 (gdb+0x8cbe6d) bminor#12 read_func_scope gdb/dwarf2/read.c:10154 (gdb+0x8a4f36) #13 process_die gdb/dwarf2/read.c:6667 (gdb+0x898daa) #14 read_file_scope gdb/dwarf2/read.c:7682 (gdb+0x89bad8) #15 process_die gdb/dwarf2/read.c:6654 (gdb+0x898ced) #16 process_full_comp_unit gdb/dwarf2/read.c:6418 (gdb+0x8981de) #17 process_queue gdb/dwarf2/read.c:5690 (gdb+0x894433) #18 dw2_do_instantiate_symtab gdb/dwarf2/read.c:1770 (gdb+0x88623a) #19 dw2_instantiate_symtab gdb/dwarf2/read.c:1792 (gdb+0x886300) #20 dw2_expand_symtabs_matching_one(dwarf2_per_cu_data*, dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>, gdb::function_view<bool (compunit_symtab*)>) gdb/dwarf2/read.c:3042 (gdb+0x88b1f1) #21 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16917 (gdb+0x8c228e) #22 objfile::lookup_symbol(block_enum, char const*, domain_enum) gdb/symfile-debug.c:288 (gdb+0xf39055) #23 lookup_symbol_via_quick_fns gdb/symtab.c:2385 (gdb+0xf66ab7) #24 lookup_symbol_in_objfile gdb/symtab.c:2516 (gdb+0xf6711b) #25 operator() gdb/symtab.c:2562 (gdb+0xf67272) #26 operator() gdb/../gdbsupport/function-view.h:305 (gdb+0xf776b1) #27 _FUN gdb/../gdbsupport/function-view.h:299 (gdb+0xf77708) #28 gdb::function_view<bool (objfile*)>::operator()(objfile*) const gdb/../gdbsupport/function-view.h:289 (gdb+0xc3fc97) #29 svr4_iterate_over_objfiles_in_search_order gdb/solib-svr4.c:3455 (gdb+0xecae47) #30 gdbarch_iterate_over_objfiles_in_search_order(gdbarch*, gdb::function_view<bool (objfile*)>, objfile*) gdb/gdbarch.c:5041 (gdb+0x537cad) #31 lookup_global_or_static_symbol gdb/symtab.c:2559 (gdb+0xf674fb) #32 lookup_global_symbol(char const*, block const*, domain_enum) gdb/symtab.c:2615 (gdb+0xf67780) #33 language_defn::lookup_symbol_nonlocal(char const*, block const*, domain_enum) const gdb/symtab.c:2447 (gdb+0xf66d6e) #34 lookup_symbol_aux gdb/symtab.c:2123 (gdb+0xf65cb3) #35 lookup_symbol_in_language(char const*, block const*, domain_enum, language, field_of_this_result*) gdb/symtab.c:1931 (gdb+0xf64dab) #36 set_initial_language() gdb/symfile.c:1708 (gdb+0xf43074) #37 symbol_file_add_main_1 gdb/symfile.c:1212 (gdb+0xf41608) #38 symbol_file_command(char const*, int) gdb/symfile.c:1681 (gdb+0xf42faf) #39 file_command gdb/exec.c:554 (gdb+0x94ff29) #40 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x6d9528) #41 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x6e0f69) #42 execute_command(char const*, int) gdb/top.c:575 (gdb+0xff379c) #43 command_handler(char const*) gdb/event-top.c:552 (gdb+0x94b5bc) #44 command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) gdb/event-top.c:788 (gdb+0x94bc79) #45 tui_command_line_handler gdb/tui/tui-interp.c:104 (gdb+0x1034efc) #46 gdb_rl_callback_handler gdb/event-top.c:259 (gdb+0x94ab61) #47 rl_callback_read_char readline/readline/callback.c:290 (gdb+0x11be4ef) #48 gdb_rl_callback_read_char_wrapper_noexcept gdb/event-top.c:195 (gdb+0x94a960) #49 gdb_rl_callback_read_char_wrapper gdb/event-top.c:234 (gdb+0x94aa21) #50 stdin_event_handler gdb/ui.c:155 (gdb+0x10751a0) #51 handle_file_event gdbsupport/event-loop.cc:573 (gdb+0x1d95bac) #52 gdb_wait_for_event gdbsupport/event-loop.cc:694 (gdb+0x1d962e4) #53 gdb_do_one_event(int) gdbsupport/event-loop.cc:264 (gdb+0x1d946d0) #54 start_event_loop gdb/main.c:412 (gdb+0xb5ab52) #55 captured_command_loop gdb/main.c:476 (gdb+0xb5ad41) #56 captured_main gdb/main.c:1320 (gdb+0xb5cec1) #57 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xb5cf70) #58 main gdb/gdb.c:32 (gdb+0x416776) Previous read of size 1 at 0x7b200000420d by thread T11: #0 write_gdbindex gdb/dwarf2/index-write.c:1229 (gdb+0x831630) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1484 (gdb+0x832897) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x82db8d) #3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:645 (gdb+0x7f1d49) bminor#4 operator() gdb/dwarf2/cooked-index.c:474 (gdb+0x7f0f31) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x7f2a13) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x700952) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x7381a0) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x737e91) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x737b59) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x738660) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x73825c) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x733623) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x732bdf) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x734c4f) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x733bc5) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x73300d) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x7330b2) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x7330f2) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72f5dd) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x733224) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x732852) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x737bef) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x1dad25a) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x1dacb7c) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1dadc2b) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1dad05c) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1db038e) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1db0319) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1db02ce) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:21513 in dwarf2_per_cu_data::get_header() const ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::m_header_read_in. The two bitfields dwarf2_per_cu_data::m_header_read_in and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::m_header_read_in a packed<bool, 1>. Tested on x86_64-linux. Approved-By: Tom Tromey <tom@tromey.com> PR symtab/30392 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30392

With gdb build with -fsanitize=thread, and the exec from test-case gdb.base/index-cache.exp, I run into: ... $ rm -f ~/.cache/gdb/*; \ gdb -q -batch -iex "set index-cache enabled on" index-cache \ -ex "print foobar" ... WARNING: ThreadSanitizer: data race (pid=23970) Write of size 1 at 0x7b200000410d by main thread: #0 dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) gdb/dwarf2/read.c:3077 (gdb+0x7ac54e) #1 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16812 (gdb+0x7d039f) #2 objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view<bool (symtab*)>) gdb/symfile-debug.c:219 (gdb+0xda5aee) #3 iterate_over_symtabs(char const*, gdb::function_view<bool (symtab*)>) gdb/symtab.c:648 (gdb+0xdc439d) bminor#4 lookup_symtab(char const*) gdb/symtab.c:662 (gdb+0xdc44a2) bminor#5 classify_name gdb/c-exp.y:3083 (gdb+0x61afec) bminor#6 c_yylex gdb/c-exp.y:3251 (gdb+0x61dd13) bminor#7 c_yyparse() build/gdb/c-exp.c.tmp:1988 (gdb+0x61f07e) bminor#8 c_parse(parser_state*) gdb/c-exp.y:3417 (gdb+0x62d864) bminor#9 language_defn::parser(parser_state*) const gdb/language.c:598 (gdb+0x9771c5) bminor#10 parse_exp_in_context gdb/parse.c:414 (gdb+0xb10a9b) bminor#11 parse_expression(char const*, innermost_block_tracker*, enum_flags<parser_flag>) gdb/parse.c:462 (gdb+0xb110ae) bminor#12 process_print_command_args gdb/printcmd.c:1321 (gdb+0xb4bf0c) #13 print_command_1 gdb/printcmd.c:1335 (gdb+0xb4ca2a) #14 print_command gdb/printcmd.c:1468 (gdb+0xb4cd5a) #15 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x65b078) #16 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x65ed53) #17 execute_command(char const*, int) gdb/top.c:575 (gdb+0xe3a76a) #18 catch_command_errors gdb/main.c:518 (gdb+0xa1837d) #19 execute_cmdargs gdb/main.c:617 (gdb+0xa1853f) #20 captured_main_1 gdb/main.c:1289 (gdb+0xa1aa58) #21 captured_main gdb/main.c:1310 (gdb+0xa1b95a) #22 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xa1b95a) #23 main gdb/gdb.c:39 (gdb+0x42506a) Previous read of size 1 at 0x7b200000410d by thread T1: #0 write_gdbindex gdb/dwarf2/index-write.c:1214 (gdb+0x75bb30) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1469 (gdb+0x75f803) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x755a36) #3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:642 (gdb+0x71c96d) bminor#4 operator() gdb/dwarf2/cooked-index.c:471 (gdb+0x71c96d) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x71c96d) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x72a57c) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x72a5db) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72a5db) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x72a5db) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x72a5db) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x72a5db) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x724954) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x724954) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x72434a) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72434a) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x72434a) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x72434a) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x72434a) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72532b) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x72532b) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x174568d) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x174568d) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x174568d) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x174568d) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x1748040) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x1748040) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x1748040) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x1748040) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x1748040) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:3077 in dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::mark. The two bitfields dwarf2_per_cu_data::mark and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::mark a packed<unsigned int, 1>. Tested on x86_64-linux. PR symtab/30718 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30718

…g_types} With gdb build with -fsanitize=thread, and the exec from test-case gdb.base/index-cache.exp, I run into: ... $ rm -f ~/.cache/gdb/*; \ gdb -q -batch -iex "set index-cache enabled on" index-cache \ -ex "print foobar" ... WARNING: ThreadSanitizer: data race (pid=25018) Write of size 1 at 0x7b200000410d by main thread: #0 dw2_get_file_names_reader gdb/dwarf2/read.c:2033 (gdb+0x7ab023) #1 dw2_get_file_names gdb/dwarf2/read.c:2130 (gdb+0x7ab023) #2 dw_expand_symtabs_matching_file_matcher(dwarf2_per_objfile*, gdb::function_view<bool (char const*, bool)>) gdb/dwarf2/read.c:3105 (gdb+0x7ac6e9) #3 cooked_index_functions::expand_symtabs_matching(objfile*, gdb::function_view<bool (char const*, bool)>, lookup_name_info const*, gdb::function_view<bool (char const*)>, gdb::function_view<bool (compunit_symtab*)>, enum_flags<block_search_flag_values>, domain_enum, search_domain) gdb/dwarf2/read.c:16812 (gdb+0x7d040f) bminor#4 objfile::map_symtabs_matching_filename(char const*, char const*, gdb::function_view<bool (symtab*)>) gdb/symfile-debug.c:219 (gdb+0xda5b6e) bminor#5 iterate_over_symtabs(char const*, gdb::function_view<bool (symtab*)>) gdb/symtab.c:648 (gdb+0xdc441d) bminor#6 lookup_symtab(char const*) gdb/symtab.c:662 (gdb+0xdc4522) bminor#7 classify_name gdb/c-exp.y:3083 (gdb+0x61afec) bminor#8 c_yylex gdb/c-exp.y:3251 (gdb+0x61dd13) bminor#9 c_yyparse() build/gdb/c-exp.c.tmp:1988 (gdb+0x61f07e) bminor#10 c_parse(parser_state*) gdb/c-exp.y:3417 (gdb+0x62d864) bminor#11 language_defn::parser(parser_state*) const gdb/language.c:598 (gdb+0x977245) bminor#12 parse_exp_in_context gdb/parse.c:414 (gdb+0xb10b1b) #13 parse_expression(char const*, innermost_block_tracker*, enum_flags<parser_flag>) gdb/parse.c:462 (gdb+0xb1112e) #14 process_print_command_args gdb/printcmd.c:1321 (gdb+0xb4bf8c) #15 print_command_1 gdb/printcmd.c:1335 (gdb+0xb4caaa) #16 print_command gdb/printcmd.c:1468 (gdb+0xb4cdda) #17 do_simple_func gdb/cli/cli-decode.c:95 (gdb+0x65b078) #18 cmd_func(cmd_list_element*, char const*, int) gdb/cli/cli-decode.c:2735 (gdb+0x65ed53) #19 execute_command(char const*, int) gdb/top.c:575 (gdb+0xe3a7ea) #20 catch_command_errors gdb/main.c:518 (gdb+0xa183fd) #21 execute_cmdargs gdb/main.c:617 (gdb+0xa185bf) #22 captured_main_1 gdb/main.c:1289 (gdb+0xa1aad8) #23 captured_main gdb/main.c:1310 (gdb+0xa1b9da) #24 gdb_main(captured_main_args*) gdb/main.c:1339 (gdb+0xa1b9da) #25 main gdb/gdb.c:39 (gdb+0x42506a) Previous read of size 1 at 0x7b200000410d by thread T2: #0 write_gdbindex gdb/dwarf2/index-write.c:1214 (gdb+0x75bb30) #1 write_dwarf_index(dwarf2_per_bfd*, char const*, char const*, char const*, dw_index_kind) gdb/dwarf2/index-write.c:1469 (gdb+0x75f803) #2 index_cache::store(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/index-cache.c:173 (gdb+0x755a36) #3 cooked_index::maybe_write_index(dwarf2_per_bfd*, index_cache_store_context const&) gdb/dwarf2/cooked-index.c:642 (gdb+0x71c96d) bminor#4 operator() gdb/dwarf2/cooked-index.c:471 (gdb+0x71c96d) bminor#5 _M_invoke /usr/include/c++/7/bits/std_function.h:316 (gdb+0x71c96d) bminor#6 std::function<void ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x72a57c) bminor#7 void std::__invoke_impl<void, std::function<void ()>&>(std::__invoke_other, std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:60 (gdb+0x72a5db) bminor#8 std::__invoke_result<std::function<void ()>&>::type std::__invoke<std::function<void ()>&>(std::function<void ()>&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72a5db) bminor#9 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}::operator()() const /usr/include/c++/7/future:1421 (gdb+0x72a5db) bminor#10 std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void>::operator()() const /usr/include/c++/7/future:1362 (gdb+0x72a5db) bminor#11 std::_Function_handler<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> (), std::__future_base::_Task_setter<std::unique_ptr<std::__future_base::_Result<void>, std::__future_base::_Result_base::_Deleter>, std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run()::{lambda()#1}, void> >::_M_invoke(std::_Any_data const&) /usr/include/c++/7/bits/std_function.h:302 (gdb+0x72a5db) bminor#12 std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>::operator()() const /usr/include/c++/7/bits/std_function.h:706 (gdb+0x724954) #13 std::__future_base::_State_baseV2::_M_do_set(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*) /usr/include/c++/7/future:561 (gdb+0x724954) #14 void std::__invoke_impl<void, void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::__invoke_memfun_deref, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x72434a) #15 std::__invoke_result<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>::type std::__invoke<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x72434a) #16 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#1}::operator()() const /usr/include/c++/7/mutex:672 (gdb+0x72434a) #17 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::operator()() const /usr/include/c++/7/mutex:677 (gdb+0x72434a) #18 std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&)::{lambda()#2}::_FUN() /usr/include/c++/7/mutex:677 (gdb+0x72434a) #19 pthread_once <null> (libtsan.so.0+0x4457c) #20 __gthread_once /usr/include/c++/7/x86_64-suse-linux/bits/gthr-default.h:699 (gdb+0x72532b) #21 void std::call_once<void (std::__future_base::_State_baseV2::*)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*>(std::once_flag&, void (std::__future_base::_State_baseV2::*&&)(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*, bool*), std::__future_base::_State_baseV2*&&, std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>*&&, bool*&&) /usr/include/c++/7/mutex:684 (gdb+0x72532b) #22 std::__future_base::_State_baseV2::_M_set_result(std::function<std::unique_ptr<std::__future_base::_Result_base, std::__future_base::_Result_base::_Deleter> ()>, bool) /usr/include/c++/7/future:401 (gdb+0x174570d) #23 std::__future_base::_Task_state<std::function<void ()>, std::allocator<int>, void ()>::_M_run() /usr/include/c++/7/future:1423 (gdb+0x174570d) #24 std::packaged_task<void ()>::operator()() /usr/include/c++/7/future:1556 (gdb+0x174570d) #25 gdb::thread_pool::thread_function() gdbsupport/thread-pool.cc:242 (gdb+0x174570d) #26 void std::__invoke_impl<void, void (gdb::thread_pool::*)(), gdb::thread_pool*>(std::__invoke_memfun_deref, void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:73 (gdb+0x17480c0) #27 std::__invoke_result<void (gdb::thread_pool::*)(), gdb::thread_pool*>::type std::__invoke<void (gdb::thread_pool::*)(), gdb::thread_pool*>(void (gdb::thread_pool::*&&)(), gdb::thread_pool*&&) /usr/include/c++/7/bits/invoke.h:95 (gdb+0x17480c0) #28 decltype (__invoke((_S_declval<0ul>)(), (_S_declval<1ul>)())) std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::_M_invoke<0ul, 1ul>(std::_Index_tuple<0ul, 1ul>) /usr/include/c++/7/thread:234 (gdb+0x17480c0) #29 std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> >::operator()() /usr/include/c++/7/thread:243 (gdb+0x17480c0) #30 std::thread::_State_impl<std::thread::_Invoker<std::tuple<void (gdb::thread_pool::*)(), gdb::thread_pool*> > >::_M_run() /usr/include/c++/7/thread:186 (gdb+0x17480c0) #31 <null> <null> (libstdc++.so.6+0xdcac2) ... SUMMARY: ThreadSanitizer: data race gdb/dwarf2/read.c:2033 in dw2_get_file_names_reader ... The race happens when issuing the "file $exec" command. The race is between: - a worker thread writing the index cache, and in the process reading dwarf2_per_cu_data::is_debug_type, and - the main thread writing to dwarf2_per_cu_data::files_read. The two bitfields dwarf2_per_cu_data::files_read and dwarf2_per_cu_data::is_debug_type share the same bitfield container. Fix this by making dwarf2_per_cu_data::files_read a packed<bool, 1>. Tested on x86_64-linux. PR symtab/30718 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30718

It was pointed out on the mailing list[1] that after this commit: commit b1e0126 Date: Wed Jun 21 14:18:54 2023 +0100 gdb: don't resume vfork parent while child is still running the test gdb.base/vfork-follow-parent.exp now has some failures when run with the native-gdbserver or native-extended-gdbserver boards: FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to end of inferior 2 (timeout) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: inferior 1 (timeout) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: print unblock_parent = 1 (timeout) FAIL: gdb.base/vfork-follow-parent.exp: resolution_method=schedule-multiple: continue to break_parent (timeout) The reason that these failures don't show up when run on the standard unix board is that the test is only run in the default operating mode, so for Linux this will be all-stop on top of non-stop. If we adjust the test script so that it runs in the default mode and with target-non-stop turned off, then we see the same failures on the unix board. This commit includes this change. The way that the test is written means that it is not (currently) possible to turn on non-stop mode and have the test still work, so this commit does not do that. I have also updated the test script so that the vfork child performs an exec as well as the current exit. Exec and exit are the two ways in which a vfork child can release the vfork parent, so testing both of these cases is useful I think. In this test the inferior performs a vfork and the vfork-child immediately exits. The vfork-parent will wait for the vfork-child and then blocks waiting for gdb. Once gdb has released the vfork-parent, the vfork-parent also exits. In the test that fails, GDB sets 'detach-on-fork off' and then runs to the vfork. At this point the test tries to just "continue", but this fails as the vfork-parent is still selected, and the parent can't continue until the vfork-child completes. As the vfork-child is stopped by GDB the parent will never stop once resumed, so GDB refuses to resume it. The test script then sets 'schedule-multiple on' and once again continues. This time GDB, in theory, resumes both the parent and the child, the parent will be held blocked by the kernel, but the child will run until it exits, and which point GDB stops again, this time with inferior 2, the newly exited vfork-child, selected. What happens after this in the test script is irrelevant as far as this failure is concerned. To understand why the test started failing we should consider the behaviour of four different cases: 1. All-stop-on-non-stop before commit b1e0126, 2. All-stop-on-non-stop after commit b1e0126, 3. All-stop-on-all-stop before commit b1e0126, and 4. All-stop-on-all-stop after commit b1e0126. Only case bminor#4 is failing after commit b1e0126, but I think the other cases are interesting because, (a) they inform how we might fix the regression, and (b) it turns out the behaviour of #2 changed too with the commit, but the change was harmless. For #1 All-stop-on-non-stop before commit b1e0126, what happens is: 1. GDB calls proceed with the vfork-parent selected, as schedule multiple is on user_visible_resume_ptid returns -1 (everything) as the resume_ptid (see proceed function), 2. As this is all-stop-on-non-stop, every thread is resumed individually, so GDB tries to resume both the vfork-parent and the vfork-child, both of which succeed, 3. The vfork-parent is held stopped by the kernel, 4. The vfork-child completes (exits) at which point the GDB sees the EXITED event for the vfork-child and the VFORK_DONE event for the vfork-parent, 5. At this point we might take two paths depending on which event GDB handles first, if GDB handles the VFORK_DONE first then: (a) As GDB is controlling both parent and child the VFORK_DONE is ignored (see handle_vfork_done), the vfork-parent will be resumed, (b) GDB processes the EXITED event, selects the (now defunct) vfork-child, and stops, returning control to the user. Alternatively, if GDB selects the EXITED event first then: (c) GDB processes the EXITED event, selects the (now defunct) vfork-child, and stops, returning control to the user. (d) At some future time the user resumes the vfork-parent, at which point the VFORK_DONE is reported to GDB, however, GDB is ignoring the VFORK_DONE (see handle_vfork_done), so the parent is resumed. For case #2, all-stop-on-non-stop after commit b1e0126, the important difference is in step (2) above, now, instead of resuming both the vfork-parent and the vfork-child, only the vfork-child is resumed. As such, when we get to step (5), only a single event, the EXITED event is reported. GDB handles the EXITED just as in (5)(c), then, later, when the user resumes the vfork-parent, the VFORKED_DONE is immediately delivered from the kernel, but this is ignored just as in (5)(d), and so, though the pattern of when the vfork-parent is resumed changes, the overall pattern of which events are reported and when, doesn't actually change. In fact, by not resuming the vfork-parent, the order of events (in this test) is now deterministic, which (maybe?) is a good thing. If we now consider case #3, all-stop-on-all-stop before commit b1e0126, then what happens is: 1. GDB calls proceed with the vfork-parent selected, as schedule multiple is on user_visible_resume_ptid returns -1 (everything) as the resume_ptid (see proceed function), 2. As this is all-stop-on-all-stop, the resume is passed down to the linux-nat target, the vfork-parent is the event thread, while the vfork-child is a sibling of the event thread, 3. In linux_nat_target::resume, GDB calls linux_nat_resume_callback for all threads, this causes the vfork-child to be resumed. Then in linux_nat_target::resume, the event thread, the vfork-parent, is also resumed. 4. The vfork-parent is held stopped by the kernel, 5. The vfork-child completes (exits) at which point the GDB sees the EXITED event for the vfork-child and the VFORK_DONE event for the vfork-parent, 6. We are now in a situation identical to step (5) as for all-stop-on-non-stop above, GDB selects one of the events to handle, and whichever we select the user sees the correct behaviour. And so, finally, we can consider bminor#4, all-stop-on-all-stop after commit b1e0126, this is the case that started failing. We start out just like above, in proceed, the resume_ptid is -1 (resume everything), due to schedule multiple being on. And just like above, due to the target being all-stop, we call proceed_resume_thread_checked just once, for the current thread, which, remember, is the vfork-parent thread. The change in commit b1e0126 was to avoid resuming a vfork-parent thread, read the commit message for the justification for this change. However, this means that GDB now rejects resuming the vfork-parent in this case, which means that nothing gets resumed! Obviously, if nothing resumes, then nothing will ever stop, and so GDB appears to hang. I considered a couple of solutions which, in the end, I didn't go with, these were: 1. Move the vfork-parent check out of proceed_resume_thread_checked, and place it in proceed, but only on the all-stop-on-non-stop path, this should still address the issue seen in b1e0126, but would avoid the issue seen here. I rejected this just because it didn't feel great to split the checks that exist in proceed_resume_thread_checked like this, 2. Extend the condition in proceed_resume_thread_checked by adding a target_is_non_stop_p check. This would have the same effect as idea 1, but leaves all the checks in the same place, which I think would be better, but this still just didn't feel right to me, and so, What I noticed was that for the all-stop-on-non-stop, after commit b1e0126, we only resumed the vfork-child, and this seems fine. The vfork-parent isn't going to run anyway (the kernel will hold it back), so if feels like we there's no harm in just waiting for the child to complete, and then resuming the parent. So then I started looking at follow_fork, which is called from the top of proceed. This function already has the task of switching between the parent and child based on which the user wishes to follow. So, I wondered, could we use this to switch to the vfork-child in the case that we are attached to both? Turns out this is pretty simple to do. Having done that, now the process is for all-stop-on-all-stop after commit b1e0126, and with this new fix is: 1. GDB calls proceed with the vfork-parent selected, but, 2. In follow_fork, and follow_fork_inferior, GDB switches the selected thread to be that of the vfork-child, 3. Back in proceed user_visible_resume_ptid returns -1 (everything) as the resume_ptid still, but now, 4. When GDB calls proceed_resume_thread_checked, the vfork-child is the current selected thread, this is not a vfork-parent, and so GDB allows the proceed to continue to the linux-nat target, 5. In linux_nat_target::resume, GDB calls linux_nat_resume_callback for all threads, this does not resume the vfork-parent (because it is a vfork-parent), and then the vfork-child is resumed as this is the event thread, At this point we are back in the same situation as for all-stop-on-non-stop after commit b1e0126, that is, the vfork-child is resumed, while the vfork-parent is held stopped by GDB. Eventually the vfork-child will exit or exec, at which point the vfork-parent will be resumed. [1] https://inbox.sourceware.org/gdb-patches/3e1e1db0-13d9-dd32-b4bb-051149ae6e76@simark.ca/

After running a number of programs under Windows gdb and detaching them, I typed run in gdb, and got a hang, here: (top-gdb) bt #0 sharing_input_terminal (pid=4672) at /home/pedro/gdb/src/gdb/mingw-hdep.c:388 #1 0x00007ff71a2d8678 in sharing_input_terminal (inf=0x23bf23dafb0) at /home/pedro/gdb/src/gdb/inflow.c:269 #2 0x00007ff71a2d887b in child_terminal_save_inferior (self=0x23bf23de060) at /home/pedro/gdb/src/gdb/inflow.c:423 #3 0x00007ff71a2c80c0 in inf_child_target::terminal_save_inferior (this=0x23bf23de060) at /home/pedro/gdb/src/gdb/inf-child.c:111 bminor#4 0x00007ff71a429c0f in target_terminal_is_ours_kind (desired_state=target_terminal_state::is_ours_for_output) at /home/pedro/gdb/src/gdb/target.c:1037 bminor#5 0x00007ff71a429e02 in target_terminal::ours_for_output () at /home/pedro/gdb/src/gdb/target.c:1094 bminor#6 0x00007ff71a2ccc8e in post_create_inferior (from_tty=0) at /home/pedro/gdb/src/gdb/infcmd.c:245 bminor#7 0x00007ff71a2cd431 in run_command_1 (args=0x0, from_tty=0, run_how=RUN_NORMAL) at /home/pedro/gdb/src/gdb/infcmd.c:502 bminor#8 0x00007ff71a2cd58b in run_command (args=0x0, from_tty=0) at /home/pedro/gdb/src/gdb/infcmd.c:527 The problem is that the loop around GetConsoleProcessList looped forever, because there were exactly 10 processes to return. GetConsoleProcessList's documentation says: If the buffer is too small to hold all the valid process identifiers, the return value is the required number of array elements. The function will have stored no identifiers in the buffer. In this situation, use the return value to allocate a buffer that is large enough to store the entire list and call the function again. In this case, the buffer wasn't too small, it was exactly the right size, so we should have broken out of the loop. We didn't due to a "<" check that should have been "<=". That is fixed by this patch. Approved-By: Tom Tromey <tom@tromey.com> Reviewed-By: Eli Zaretskii <eliz@gnu.org> Change-Id: I14e4909f2ac2fa83d0d9b6e64418b5831ac4e4e3

This commit fixes an issue that was discovered while writing the tests for the previous commit. I noticed that, when GDB restarts an inferior, the executable_changed event would trigger twice. The first notification would originate from: #0 exec_file_attach (filename=0x4046680 "/tmp/hello.x", from_tty=0) at ../../src/gdb/exec.c:513 #1 0x00000000006f3adb in reopen_exec_file () at ../../src/gdb/corefile.c:122 #2 0x0000000000e6a3f2 in generic_mourn_inferior () at ../../src/gdb/target.c:3682 #3 0x0000000000995121 in inf_child_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/inf-child.c:192 bminor#4 0x0000000000995cff in inf_ptrace_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/inf-ptrace.c:125 bminor#5 0x0000000000a32472 in linux_nat_target::mourn_inferior (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/linux-nat.c:3609 bminor#6 0x0000000000e68a40 in target_mourn_inferior (ptid=...) at ../../src/gdb/target.c:2761 bminor#7 0x0000000000a323ec in linux_nat_target::kill (this=0x2fe95c0 <the_amd64_linux_nat_target>) at ../../src/gdb/linux-nat.c:3593 bminor#8 0x0000000000e64d1c in target_kill () at ../../src/gdb/target.c:924 bminor#9 0x00000000009a19bc in kill_if_already_running (from_tty=1) at ../../src/gdb/infcmd.c:328 bminor#10 0x00000000009a1a6f in run_command_1 (args=0x0, from_tty=1, run_how=RUN_STOP_AT_MAIN) at ../../src/gdb/infcmd.c:381 bminor#11 0x00000000009a20a5 in start_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:527 bminor#12 0x000000000068dc5d in do_simple_func (args=0x0, from_tty=1, c=0x35c7200) at ../../src/gdb/cli/cli-decode.c:95 While the second originates from: #0 exec_file_attach (filename=0x3d7a1d0 "/tmp/hello.x", from_tty=0) at ../../src/gdb/exec.c:513 #1 0x0000000000dfe525 in reread_symbols (from_tty=1) at ../../src/gdb/symfile.c:2517 #2 0x00000000009a1a98 in run_command_1 (args=0x0, from_tty=1, run_how=RUN_STOP_AT_MAIN) at ../../src/gdb/infcmd.c:398 #3 0x00000000009a20a5 in start_command (args=0x0, from_tty=1) at ../../src/gdb/infcmd.c:527 bminor#4 0x000000000068dc5d in do_simple_func (args=0x0, from_tty=1, c=0x35c7200) at ../../src/gdb/cli/cli-decode.c:95 In the first case the call to exec_file_attach first passes through reopen_exec_file. The reopen_exec_file performs a modification time check on the executable file, and only calls exec_file_attach if the executable has changed on disk since it was last loaded. However, in the second case things work a little differently. In this case GDB is really trying to reread the debug symbol. As such, we iterate over the objfiles list, and for each of those we check the modification time, if the file on disk has changed then we reload the debug symbols from that file. However, there is an additional check, if the objfile has the same name as the executable then we will call exec_file_attach, but we do so without checking the cached modification time that indicates when the executable was last reloaded, as a result, we reload the executable twice. In this commit I propose that reread_symbols be changed to unconditionally call reopen_exec_file before performing the objfile iteration. This will ensure that, if the executable has changed, then the executable will be reloaded, however, if the executable has already been recently reloaded, we will not reload it for a second time. After handling the executable, GDB can then iterate over the objfiles list and reload them in the normal way. With this done I now see the executable reloaded only once when GDB restarts an inferior, which means I can remove the kfail that I added to the gdb.python/py-exec-file.exp test in the previous commit. Approved-By: Tom Tromey <tom@tromey.com>

It was pointed out on the mailing list that a recently added test (gdb.python/py-progspace-events.exp) was failing when run with the native-extended-gdbserver board. This test was added with this commit: commit 59912fb Date: Tue Sep 19 11:45:36 2023 +0100 gdb: add Python events for program space addition and removal It turns out though that the test is failing due to a existing bug in GDB, the new test just exposes the problem. Additionally, the failure really doesn't even rely on the new functionality added in the above commit. I reduced the test to a simple set of steps that reproduced the failure and tested against GDB 13, and the test passes; so the bug was introduced since then. In fact, the bug was introduced with this commit: commit a282736 Date: Fri Sep 8 15:48:16 2023 +0100 gdb: remove final user of the executable_changed observer This commit changed how the per-inferior auxv data cache is managed, specifically, when the cache is cleared, and it is this that leads to the failure. This bug is interesting because it exposes a number of issues with GDB, I'll explain all of the problems I see, though ultimately, I only propose fixing one problem in this commit, which is enough to resolve the crash we are currently seeing. The crash that we are seeing manifests like this: ... [Inferior 2 (process 3970384) exited normally] +inferior 1 [Switching to inferior 1 [process 3970383] (/tmp/build/gdb/testsuite/outputs/gdb.python/py-progspace-events/py-progspace-events)] [Switching to thread 1.1 (Thread 3970383.3970383)] #0 breakpt () at /tmp/build/gdb/testsuite/../../../src/gdb/testsuite/gdb.python/py-progspace-events.c:28 28 { /* Nothing. */ } (gdb) step +step terminate called after throwing an instance of 'gdb_exception_error' Fatal signal: Aborted ... etc ... What's happening is that GDB attempts to refill the auxv cache as a result of the gdbarch_has_shared_address_space call in program_space::~program_space, the backtrace looks like this: #0 0x00007fb4f419a9a5 in raise () from /lib64/libpthread.so.0 #1 0x00000000008b635d in handle_fatal_signal (sig=6) at ../../src/gdb/event-top.c:912 #2 <signal handler called> #3 0x00007fb4f38e3625 in raise () from /lib64/libc.so.6 bminor#4 0x00007fb4f38cc8d9 in abort () from /lib64/libc.so.6 bminor#5 0x00007fb4f3c70756 in __gnu_cxx::__verbose_terminate_handler() [clone .cold] () from /lib64/libstdc++.so.6 bminor#6 0x00007fb4f3c7c6dc in __cxxabiv1::__terminate(void (*)()) () from /lib64/libstdc++.so.6 bminor#7 0x00007fb4f3c7b6e9 in __cxa_call_terminate () from /lib64/libstdc++.so.6 bminor#8 0x00007fb4f3c7c094 in __gxx_personality_v0 () from /lib64/libstdc++.so.6 bminor#9 0x00007fb4f3a80c63 in _Unwind_RaiseException_Phase2 () from /lib64/libgcc_s.so.1 bminor#10 0x00007fb4f3a8154e in _Unwind_Resume () from /lib64/libgcc_s.so.1 bminor#11 0x0000000000e8832d in target_read_alloc_1<unsigned char> (ops=0x408a3a0, object=TARGET_OBJECT_AUXV, annex=0x0) at ../../src/gdb/target.c:2266 bminor#12 0x0000000000e73dea in target_read_alloc (ops=0x408a3a0, object=TARGET_OBJECT_AUXV, annex=0x0) at ../../src/gdb/target.c:2315 #13 0x000000000058248c in target_read_auxv_raw (ops=0x408a3a0) at ../../src/gdb/auxv.c:379 #14 0x000000000058243d in target_read_auxv () at ../../src/gdb/auxv.c:368 #15 0x000000000058255c in target_auxv_search (match=0x0, valp=0x7ffdee17c598) at ../../src/gdb/auxv.c:415 #16 0x0000000000a464bb in linux_is_uclinux () at ../../src/gdb/linux-tdep.c:433 #17 0x0000000000a464f6 in linux_has_shared_address_space (gdbarch=0x409a2d0) at ../../src/gdb/linux-tdep.c:440 #18 0x0000000000510eae in gdbarch_has_shared_address_space (gdbarch=0x409a2d0) at ../../src/gdb/gdbarch.c:4889 #19 0x0000000000bc7558 in program_space::~program_space (this=0x4544aa0, __in_chrg=<optimized out>) at ../../src/gdb/progspace.c:124 #20 0x00000000009b245d in delete_inferior (inf=0x47b3de0) at ../../src/gdb/inferior.c:290 #21 0x00000000009b2c10 in prune_inferiors () at ../../src/gdb/inferior.c:480 #22 0x00000000009c5e3e in fetch_inferior_event () at ../../src/gdb/infrun.c:4558 #23 0x000000000099b4dc in inferior_event_handler (event_type=INF_REG_EVENT) at ../../src/gdb/inf-loop.c:42 #24 0x0000000000cbc64f in remote_async_serial_handler (scb=0x4090a30, context=0x408a6b0) at ../../src/gdb/remote.c:14859 #25 0x0000000000d83d3a in run_async_handler_and_reschedule (scb=0x4090a30) at ../../src/gdb/ser-base.c:138 #26 0x0000000000d83e1f in fd_event (error=0, context=0x4090a30) at ../../src/gdb/ser-base.c:189 So this is problem #1, if we throw an exception while deleting a program_space then this is not caught, and is going to crash GDB. Problem #2 becomes evident when we ask why GDB is throwing an error in this case; the error is thrown because the remote target, operating in non-async mode, can't read the auxv data while an inferior is running and GDB is waiting for a stop reply. The problem here then, is why does GDB get into a position where it tries to interact with the remote target in this way, at this time? The problem is caused by the prune_inferiors call which can be seen in the above backtrace. In prune_inferiors we check if the inferior is deletable, and if it is, we delete it. The problem is, I think, we should also check if the target is currently in a state that would allow us to delete the inferior. We don't currently have such a check available, we'd need to add one, but for the remote target, this would return false if the remote is in async mode and the remote is currently waiting for a stop reply. With this change in place GDB would defer deleting the inferior until the remote target has stopped, at which point GDB would be able to refill the auxv cache successfully. And then, problem #3 becomes evident when we ask why GDB is needing to refill the auxv cache now when it didn't need to for GDB 13. This is where the second commit mentioned above (a282736) comes in. Prior to this commit, the auxv cache was cleared by the executable_changed observer, while after that commit the auxv cache was cleared by the new_objfile observer -- but only when the new_objfile observer is used in the special mode that actually means that all objfiles have been unloaded (I know, the overloading of the new_objfile observer is horrible, and unnecessary, but it's not really important for this bug). The difference arises because the new_objfile observer is triggered from clear_symtab_users, which in turn is called from program_space::~program_space. The new_objfile observer for auxv does this: static void auxv_new_objfile_observer (struct objfile *objfile) { if (objfile == nullptr) invalidate_auxv_cache_inf (current_inferior ()); } That is, when all the objfiles are unloaded, we clear the auxv cache for the current inferior. The problem is, then when we look at the prune_inferiors -> delete_inferior -> ~program_space path, we see that the current inferior is not going to be an inferior that exists within the program_space being deleted; delete_inferior removes the deleted inferior from the global inferior list, and then only deletes the program_space if program_space::empty() returns true, which is only the case if the current inferior isn't within the program_space to delete, and no other inferior exists within that program_space either. What this means is that when the new_objfile observer is called we can't rely on the current inferior having any relationship with the program space in which the objfiles were removed. This was an error in the commit a282736, the only thing we can rely on is the current program space. As a result of this mistake, after commit a282736, GDB was sometimes clearing the auxv cache for a random inferior. In the native target case this was harmless as we can always refill the cache when needed, but in the remote target case, if we need to refill the cache when the remote target is executing, then we get the crash we observed. And additionally, if we think about this a little more, we see that commit a282736 made another mistake. When all the objfiles are removed, they are removed from a program_space, a program_space might contain multiple inferiors, so surely, we should clear the auxv cache for all of the matching inferiors? Given these two insights, that the current_inferior is not relevant, only the current_program_space, and that we should be clearing the cache for all inferiors in the current_program_space, we can update auxv_new_objfile_observer to: if (objfile == nullptr) { for (inferior *inf : all_inferiors ()) { if (inf->pspace == current_program_space) invalidate_auxv_cache_inf (inf); } } With this change we now correctly clear the auxv cache for the correct inferiors, and GDB no longer needs to refill the cache at an inconvenient time, this avoids the crash we were seeing. And finally, we reach problem bminor#4. Inspired by the observation that using the current_inferior from within the ~program_space function was not correct, I added some debug to see if current_inferior() was called anywhere else (below ~program_space), and the answer is yes, it's called a often. Mostly the culprit is GDB doing: current_inferior ()->top_target ()-> .... But I think all of these calls are most likely doing the wrong thing, and only work because the top target in all these cases is shared between all inferiors, e.g. it's the native target, or the remote target for all inferiors. But if we had a truly multi-connection setup, then we might start to see odd behaviour. Problem #1 I'm just ignoring for now, I guess at some point we might run into this again, and then we'd need to solve this. But in this case I wasn't sure what a "good" solution would look like. We need the auxv data in order to implement the linux_is_uclinux() function. If we can't get the auxv data then what should we do, assume yes, or assume no? The right answer would probably be to propagate the error back up the stack, but then we reach ~program_space, and throwing exceptions from a destructor is problematic, so we'd need to catch and deal at this point. The linux_is_uclinux() call is made from within gdbarch_has_shared_address_space(), which is used like: if (!gdbarch_has_shared_address_space (target_gdbarch ())) delete this->aspace; So, we would have to choose; delete the address space or not. If we delete it on error, then we might delete an address space that is shared within another program space. If we don't delete the address space, then we might leak it. Neither choice is great. A better solution might be to have the address spaces be reference counted, then we could remove the gdbarch_has_shared_address_space call completely, and just rely on the reference count to auto-delete the address space when appropriate. The solution for problem #2 I already hinted at above, we should have a new target_can_delete_inferiors() call, which should be called from prune_inferiors, this would prevent GDB from trying to delete inferiors when a (remote) target is in a state where we know it can't delete the inferior. Deleting an inferior often (always?) requires sending packets to the remote, and if the remote is waiting for a stop reply then this will never work, so the pruning should be deferred in this case. The solution for problem #3 is included in this commit. And, for problem bminor#4, I'm not sure what the right solution is. Maybe delete_inferior should ensure the inferior to be deleted is in place when ~program_space is called? But that seems a little weird, as the current inferior would, in theory, still be using the current program_space... Anyway, after this commit, the gdb.python/py-progspace-events.exp test now passes when run with the native-extended-remote board. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=30935 Approved-By: Simon Marchi <simon.marchi@efficios.com> Change-Id: I41f0e6e2d7ecc1e5e55ec170f37acd4052f46eaf

On arm-linux the linaro CI occasionally reports: ... (gdb) up 10 bminor#4 0x0001b864 in pthread_join () (gdb) FAIL: gdb.threads/staticthreads.exp: up 10 ... while this is expected: ... (gdb) up 10 #3 0x00010568 in main (argc=1, argv=0xfffeede4) at staticthreads.c:76 76 pthread_join (thread, NULL); (gdb) PASS: gdb.threads/staticthreads.exp: up 10 ... Thiago investigated the problem, and using valgrind found an invalid read in arm_exidx_fill_cache. The problem happens as follows: - an objfile and corresponding per_bfd are allocated - some memory is allocated in arm_exidx_new_objfile using objfile->objfile_obstack, for the "exception table entry cache". - a symbol reread is triggered, and the objfile, including the objfile_obstack, is destroyed - a new objfile is allocated, using the same per_bfd - again arm_exidx_new_objfile is called, but since the same per_bfd is used, it doesn't allocate any new memory for the "exception table entry cache". - the "exception table entry cache" is accessed by arm_exidx_fill_cache, and we have a use-after-free. This is a regression since commit a2726d4 ("[ARM] Store exception handling information per-bfd instead of per-objfile"), which changed the "exception table entry cache" from per-objfile to per-bfd, but failed to update the obstack_alloc. Fix this by using objfile->per_bfd->storage_obstack instead of objfile->objfile_obstack. I couldn't reproduce the FAIL myself, but Thiago confirmed that the patch fixes it. Tested on arm-linux. Approved-By: Luis Machado <luis.machado@arm.com> PR tdep/31254 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=31254

Lapshin · 2024-06-13T06:43:02Z

@wnienhaus , thank you for the contribution. Modified changes are submitted and released in https://github.com/espressif/binutils-gdb/releases/tag/esp32ulp-elf-2.38_20240113

github-actions bot changed the title ~~Fix ESP32-S2 peripheral register address range~~ Fix ESP32-S2 peripheral register address range (GCC-335) Oct 4, 2023

antmak pushed a commit that referenced this pull request Jan 13, 2024

esp32ulp: fix periph.reg.address range for esp32s2. Add esp32s3 mcpu

94ef82c

Closes #3

antmak pushed a commit that referenced this pull request Jan 13, 2024

esp32ulp: fix periph.reg.address range for esp32s2. Add esp32s3 mcpu

4043a3e

Closes #3

antmak pushed a commit that referenced this pull request Jan 13, 2024

esp32ulp: fix periph.reg.address range for esp32s2. Add esp32s3 mcpu

663f677

Closes #3

antmak pushed a commit that referenced this pull request Jan 13, 2024

esp32ulp: fix periph.reg.address range for esp32s2. Add esp32s3 mcpu

3422296

Closes #3

Lapshin closed this Jun 13, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix ESP32-S2 peripheral register address range (GCC-335) #3

Fix ESP32-S2 peripheral register address range (GCC-335) #3

wnienhaus commented Jul 29, 2023

wnienhaus commented Aug 8, 2023

Lapshin commented Jun 13, 2024

Fix ESP32-S2 peripheral register address range (GCC-335) #3

Fix ESP32-S2 peripheral register address range (GCC-335) #3

Conversation

wnienhaus commented Jul 29, 2023

wnienhaus commented Aug 8, 2023

Lapshin commented Jun 13, 2024