You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
When I try "litex_term /dev/ttyUSB3 --images=linux_2022_03_23/boot.json", everything simply gets stuck without any informtion printed. Could it be the physical connection to the board? Although I don't know exactly which port is connected to the board, I tried all the possible ports and all of them failed.
And the uploading of bitstream to xilinx_vcu118 via xsdb seems successful.
The text was updated successfully, but these errors were encountered:
So I tried to run litex_term first and then upload the bitstream. And I got the following information:
The above image is from screen with baud_rate=115200
This one is from litex_term.
It seems that the host machine is communicating with the board, but the uploading of image files are not successful.
Hi, guys.
When I try "litex_term /dev/ttyUSB3 --images=linux_2022_03_23/boot.json", everything simply gets stuck without any informtion printed. Could it be the physical connection to the board? Although I don't know exactly which port is connected to the board, I tried all the possible ports and all of them failed.
And the uploading of bitstream to xilinx_vcu118 via xsdb seems successful.
The text was updated successfully, but these errors were encountered: