Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Flickering regardless of set frequency on Arduino UNO R3(actually it's Nhduino but it doesn't matter) #9

Open
SageStarCodes opened this issue Aug 19, 2015 · 0 comments

Comments

@SageStarCodes
Copy link

I have 3 74HC595s controlling SIX(yes six, because I don't like to use the one pin on the other side of the chip)common cathode RGB LEDs with frequency set to 240(anything lower was just flickering so much I could not look at the LEDs)... First two registers flicker the LEDs at about 15Hz and the third one is fine fading the green but not blue and red(I will upload image of my PCB in Fritzing later)... Using timer2 just makes it worse or not working at all, using balance load slows the flicker to about 3/4 of the speed.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant