Feature: Add button for Marlin Manual Mesh Bed Leveling

[RidgebackZulu]

Is your feature request related to a problem? Please describe.
No.

Describe the solution you'd like
In the original Marlin LCD display is the option for bed leveling using the 9 point mesh. This works extremely well on the Ender 3 Pro. I would like to have a button added for this feature please.

Describe alternatives you've considered
I can long hold on the LCD until it switches back to the original Marlin LCD, perform mesh bed leveling, then long hold to go back.

Additional context
None.

[rebel1]

Hi,
you can test this branch https://github.com/rebel1/BIGTREETECH-TouchScreenFirmware/tree/MBL

[RidgebackZulu]

Hi, I installed this, (BIGTREE_TFT35_V3.0_E3.26.bin and /TFT35) but do not see a button for mesh level. I still only see the four point manual. I tried both Unified Menu and traditional.

[rebel1]

Hi, here is an precompiled binary for you.
BIGTREE_TFT35_V3.0_E3.26.bin.zip

[RidgebackZulu]

Thank you! I see the MBL now! Onto testing!

[RidgebackZulu]

Tested well! I ran a calibration cube, and the mesh leveling worked well! I appreciate your efforts on this and hope it gets mainlined soon. Great work!

[sonny-c]

Hi, here is a precompiled binary for you.
BIGTREE_TFT35_V3.0_E3.26.bin.zip

I was going to create a new post asking about Manual Mesh Bed Leveling, but instead, I will follow up here.

1. Does this .bin file put Manual Mesh Bed Leveling in Touch mode?
2. If so, does it allow you to edit a specific mesh point, as you can in LCD mode?
3. I am currently using the Unified MenuMaterial theme. If I flash this .bin file, do new icons need to be created for the MBL options?

[charakaSamawry]

Hi rebel1, i use MANUAL_PROBE to do UBL would tht be a good branch for me to use?? (Also running skr mini v2 and tft34 e3 v3)

[islonina]

Hi, here is an precompiled binary for you.
BIGTREE_TFT35_V3.0_E3.26.bin.zip

Hi

This doesn't work for me, i have half english half german menu and a lot of missing icon

Edit:

Found 3 icon on TFT35 with wrong file name on unify pack:

StatusBed instead of Status_Bed
StatusFan instead of Status_Fan
StatusNozzle instead of Status_Nozzle

After that everything seems to work fine

[oldman4U]

Could you please be so kind and close this ticket. Your feature request is covered in the pinned Feature Request ticket #1170

Thank you

[oldman4U]

@rebel1

Hi. Have you ever made a PR for this? If not, why not?

[oldman4U]

digant73 added Mesh bed levelling, so I remove it from the FR list

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.