[BUG] BTT GD TFT35 and SKR mini e3 v3 on Ender3 v2 freezes while printing

[jesseab]

I saw this thread :
#2530

I have the same problem. When printing from usb (and maybe sd too) from the TFT, it randomly stops printing, and the TFT freezes. The motherboard still respond to serial commands if I plug the usb.

Was it ever solved ? I updated the firmware of the TFT to the latest version as well.
I am using a TFT35 V3.0 E3

[kisslorand]

Check out this discussion and check/test the firmware suited for your TFT.

[jesseab]

Thanks for the answer, my printer doesn't hesitate tho, the screen completely freezes and the print stops, however the motherboard still communicate so it's really a TFT problem, however I will try to increase the buffer sizes and decrease the baud rates as suggested !

[rondlh]

Do a disk check on your USB drive, make sure it doesn't have errors. You can also try another USB drive.

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[github-actions]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.