Replies: 4 comments 15 replies
-
Don't look for anything complicated in it. |
Beta Was this translation helpful? Give feedback.
-
Don't you have the retraction set in the slicer as an end code? |
Beta Was this translation helpful? Give feedback.
-
Does the printer move in the right direction when printing and in the opposite direction when manually moving? |
Beta Was this translation helpful? Give feedback.
-
Do I understand you correctly? Do you cancel the print and the Y axis moves fine and the X axis goes the other way when you do HOME? |
Beta Was this translation helpful? Give feedback.
-
Hi communauty. Unfortunatly there is no manual to understand what TFT do.
It look to me that TFT bypass setting of marlin firmware present on the motherboard of the printer.
So i'm not shure if my problem is from the Marlin firmware or TFT issue
My main question, what start Gcode before print and end gcode after print does?? Cancel Gcode? Which gcode?? what it does??
In my slicer, my starting Gcode I have only G28 Where is starting ending gcode, Marlin firmware, TFT firmware, config.ini???
look at the video https://youtu.be/AuYFrXzrNqg
Bonjour communauté
Malheureusement il n'y a aucun manuel d'instruction à savoir ce que l'écran TFT fait. Ce que les "feature" font vraiment. Pour example, je me demande vraiment ce que fait la "feature" start gcode, end gcode et cancel gcode.
Je me demande ce que l'écran prend en charge, bypass ce qui est écrit dans le firmware. J'aimerais comprendre son fonctionnement...!
Quand j'arrête une impression manuellement et que j'en repars une autre le homing se fait dans la mauvaise direction.
Lorsque je fini une impression, et que j'en repars une autre, le filament se rétracte tellement quelle sort parfois de l'extrudeur.
Regarder la vidéo https://youtu.be/AuYFrXzrNqg
Beta Was this translation helpful? Give feedback.
All reactions