-
Notifications
You must be signed in to change notification settings - Fork 1.6k
/
Configuration.h
1513 lines (1359 loc) · 62.5 KB
/
Configuration.h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
#ifndef _CONFIGURATION_H_
#define _CONFIGURATION_H_
#define CONFIG_VERSION 20240203
//====================================================================================================
//=============================== Settings Configurable On config.ini ================================
//====================================================================================================
//================================================================================
//=============================== General Settings ===============================
//================================================================================
/**
* Serial Ports (Primary and Supplementary)
* Serial ports connected to devices such as Printer, ESP3D, OctoPrint and other Controllers.
* In order to successfully establish a communication through a serial port, set a baudrate
* matching the baudrate configured on the connected device.
* Disable the serial port when it is not in use and/or not connected to a device (floating) to
* avoid to receive and process wrong data due to possible electromagnetic interference (EMI).
*
* NOTES:
* - Serial port P1 is the primary serial connection to the printer and cannot be disabled.
* - A baudrate of 250000 works in most cases, but you can try a lower speed if you
* commonly experience drop-outs during host printing.
* You may try up to 1000000 to speed up SD file transfer.
*
* Format: [serial_port: P1:<baudrate> P2:<baudrate> P3:<baudrate> P4:<baudrate>
* Target port: P1: Printer
* P2: WIFI (e.g. ESP3D)
* P3: UART 3 (e.g. OctoPrint)
* P4: UART 4
* Value range: P1: [min: 1, max: 11]
* P2: [min: 0, max: 11]
* P3: [min: 0, max: 11]
* P4: [min: 0, max: 11]
* Options: [OFF (port disabled): 0, 2400: 1, 9600: 2, 19200: 3, 38400: 4, 57600: 5, 115200: 6, 230400: 7, 250000: 8, 500000: 9, 921600: 10, 1000000: 11]
*/
#define SP_1 6 // Default: 6
#define SP_2 0 // Default: 0
#define SP_3 0 // Default: 0
#define SP_4 0 // Default: 0
/**
* TX Slots
* Used/effective only in case "ADVANCED_OK" is also enabled.
* Maximum number of G-code TX slots used by the TFT for the communication with the printer.
*
* NOTES:
* - It requires "ADVANCED_OK" to be enabled.
* - This setting allows a sort of static "ADVANCED_OK" feature implementation on TFT side just in
* case "ADVANCED_OK" feature is disabled in Marlin firmware. You have to set it according to the
* following key requirements:
* - a value not bigger than "BUFSIZE" configured in Configuration_adv.h in Marlin firmware.
* - "RX_BUFFER_SIZE" properly configured in Configuration_adv.h in Marlin firmware.
* To be safe you need (MAX_CMD_SIZE * BUFSIZE) RX buffer. By default this is 96 * 4 bytes so
* you would need to at least set RX_BUFFER_SIZE to 512 bytes, practically half of that will
* be enough, but more is better/safer.
* - Typically, a value of 2 is enough to keep the printer busy most of the time while preventing
* buffer overruns on RX buffer. Thus, 2 is the suggested value in case users want to use the
* static ADVANCED_OK feature allowed by this setting.
*
* Value range: [min: 2, max: 16]
*/
#define TX_SLOTS 2 // Default: 1
/**
* Advanced OK
* If enabled:
* - if "ADVANCED_OK" feature is enabled in Configuration_adv.h in Marlin firmware, the TFT will use
* the available G-code TX slots indication provided by the mainboard to schedule the transmission
* of multiple G-codes, if any, for a maximum of the given indication.
* - if "ADVANCED_OK" feature is disabled in Configuration_adv.h in Marlin firmware, the TFT will
* support the transmission of G-codes according to the configured "TX_SLOTS" setting.
* If disabled, the TFT will provide the standard transmission logic based on one G-code per time.
*
* NOTE: Disable it in case:
* - no ADVANCED_OK feature is requested/needed by the user.
* - ADVANCED_OK feature is not providing good printing results or if the mainboard notifies
* frequent error ACK messages (e.g. unknown command) to the TFT during printing.
* - COMMAND_CHECKSUM feature (see description of next setting "COMMAND_CHECKSUM") is
* requested/needed by the user.
*
* Options: [disable: 0, enable: 1]
*/
#define ADVANCED_OK 0 // Default: 0
/**
* Command Checksum
* The TFT enriches each G-code to be sent to the mainboard adding a leading sequential line number
* and a trailing checksum appended after an "*" character used as separator.
* The checksum is based on algorithm "CheckSum8 Xor" and it is calculated on the G-code with the
* applied line number. E.g. "G28" is firstly enriched with a line number (e.g. "N1 G28") and finally
* a checksum calculated on that enriched G-code is appended (e.g. "N1 G28*18").
* A data integrity check (sequential line number check and checksum check) will be performed on the
* mainboard. In case of data mismatch (e.g. data corruption due to EMI on communication serial line):
* - the mainboard will send to the TFT an error ACK message followed by a "Resend: " ACK message to
* ask TFT to resend the G-code with the requested line number.
* - the TFT will check the presence on an internal buffer of the G-code with the requested line number:
* - if found, the G-code is resent for a maximum of 3 attempts.
* - if not found or the maximum number of attempts has been reached, the TFT will reset the line
* number with an "M110" G-code (immediately sent bypassing any other enqueued G-code) to the
* requested line number just to try to avoid further retransmission requests for the same line
* number or for any out of synch command already sent to the mainboard (e.g. in case ADVANCED_OK
* feature is enabled in TFT).
*
* NOTE: Disable it in case:
* - printing is controlled by a remote host (e.g. ESP3D, OctoPrint etc.) and a COMMAND_CHECKSUM
* feature is enabled and managed by the remote host. Otherwise (COMMAND_CHECKSUM feature also
* enabled in TFT), the TFT's COMMAND_CHECKSUM feature will always replace the one provided by
* the remote host causing conflicts in case data mismatch will be notified by the mainboard.
* - ADVANCED_OK feature is enabled in TFT. Otherwise, any out of synch command already sent to
* the mainboard will be discarded by the mainboard and not resent by the TFT due the current
* implementation of COMMAND_CHECKSUM feature on the TFT buffers only the last sent command
* and not all the pending commands.
*
* Options: [disable: 0, enable: 1]
*/
#define COMMAND_CHECKSUM 0 // Default: 0
/**
* Emulated M600
* The TFT intercepts the M600 G-code (filament change) and emulates the handling logic
* otherwise provided by Marlin firmware.
*
* NOTE: Enable it in case Marlin firmware does not properly support M600 on the mainboard.
*
* Options: [disable: 0, enable: 1]
*/
#define EMULATED_M600 1 // Default: 1
/**
* Emulated M109 And M190
* The TFT intercepts the blocking M109 and M190 G-codes (set target hotend and bed temperatures)
* and converts them to the non-blocking M104 and M140 G-codes respectively.
*
* NOTE: Enable it so the TFT can still communicate with Marlin firmware even if the target
* temperature is not reached yet. Otherwise the communication (TFT<->Marlin) will be
* frozen until desired/set temperatures are obtained.
*
* Options: [disable: 0, enable: 1]
*/
#define EMULATED_M109_M190 1 // Default: 1
/**
* Event LED
* When printing from TFT SD card / TFT USB disk, the TFT periodically sets the printer's (neopixel)
* LED color and TFT's knob LED color, if any, according to the current nozzle and bed temperatures.
*
* NOTE: If "EMULATED_M109_M190" is disabled (heating controlled by printer), the TFT cannot control the
* printer's (neopixel) LED during heating. It will control only the TFT's knob LED, if any.
*
* Options: [disable: 0, enable: 1]
*/
#define EVENT_LED 1 // Default: 1
/**
* G-code File Comment Parsing
* The TFT parses and processes extra information provided by the slicer as comments in the G-code file.
* If enabled, the current implementation parses and processes print time and print layer information
* from the G-code file (nothing else).
* If disabled, the "LAYER_DISP_TYPE" setting provided in "UI Settings" section becomes redundant.
*
* NOTE: Enable it in case the slicer (e.g. Cura) supports extra information.
*
* Options: [disable: 0, enable: 1]
*/
#define FILE_COMMENT_PARSING 1 // Default: 1
//================================================================================
//================================= UI Settings ==================================
//================================================================================
/**
* Rotated UI
* Rotate UI by 180 degrees.
* Options: [disable: 0, enable: 1]
*/
#define ROTATED_UI 0 // Default: 0
/**
* Touch Mode Language
* Select the language to use on the LCD while in Touch Mode.
*
* NOTE: To add/flash a second language copy the required "language_xx.ini" file from
* "Language Packs" folder to the SD root folder.
* Then press the reset button to load/flash the copied language file.
*
* Options: [Primary Language (english): 0, Secondary Language: 1]
*/
#define LANGUAGE 0 // Default: 0
/**
* Status Screen
* Select the default home screen while in Touch Mode.
* If enabled, the Status Screen menu will become the default home screen.
* If disabled, the Main menu will become the default home screen.
*
* NOTE: Both the Status Screen and Main menus display the current temperature, fan and speeds.
* Furthermore, the Status Screen menu provides the status area reporting the printer notifications.
*
* Options: [disable: 0, enable: 1]
*/
#define STATUS_SCREEN 1 // Default: 1
/**
* Touch Mode Colors
* Set colors used in Touch Mode.
*
* NOTE: Select an option from the provided list or set the color (RGB888 format) hex value directly
* (start with "0x"), such as: Red: 0xFF0000, Green: 0x00FF00, Blue: 0x0000FF.
*
* Options: [ WHITE: 0, BLACK: 1, RED: 2, GREEN: 3, BLUE: 4, CYAN: 5, MAGENTA: 6, YELLOW: 7,
* ORANGE: 8, PURPLE: 9, LIME: 10, BROWN: 11, DARKBLUE: 12, DARKGREEN: 13, GRAY: 14, DARKGRAY: 15]
*/
#define TITLE_BACKGROUND_COLOR 1 // Title background color (Default: 1)
#define MENU_BACKGROUND_COLOR 1 // Menu background color (Default: 1)
#define MENU_FONT_COLOR 0 // Menu font color (Default: 0)
#define REMINDER_FONT_COLOR 2 // Reminder font color, such as: "No print attached", "Busy processing", etc. (Default: 2)
#define STATUS_FONT_COLOR 5 // Status (e.g. volume reminder, ABL probing point etc.) font color, such as: "Card inserted", "Card removed" (Default: 5)
#define STATUS_XYZ_BG_COLOR 15 // Background color for X Y Z position display in Status Screen menu (Default: 15)
#define LIST_BORDER_COLOR 15 // List View border color (Default: 15)
#define LIST_BUTTON_BG_COLOR 15 // List View button background color (Default: 15)
// Mesh Leveling Display Colors (Mesh Editor)
// Set the colors used for drawing the mesh with the minimum and maximum value in the grid.
#define MESH_MIN_COLOR 7 // Default: 7
#define MESH_MAX_COLOR 2 // Default: 2
/**
* Terminal Text Color Scheme
* Color scheme for displaying text in Terminal menu.
* Options: [Material Dark: 0, Material Light: 1, High Contrast: 2]
* Material Dark: Dark background with light font color and orange command font color.
* Material Light: Light background with dark font color and orange command font color.
* High Contrast: Black background with white font color and orange command font color.
*/
#define TERMINAL_COLOR_SCHEME 0 // Default: 0
/**
* Notification Style For ACK Messages
* Set the notification style to use for displaying the ACK messages which start with "echo:".
*
* NOTE: The OFF value is applied to any ACK message type (e.g. even to known echo ACK).
* It means that any kind of ACK message is silently discarded.
*
* Options: [OFF: 0, POPUP: 1, TOAST: 2]
* OFF: No notification. The message is ignored.
* POPUP: Display a popup window for user confirmation.
* TOAST: A non-blocking toast notification is displayed for few seconds. No user interaction is needed.
*/
#define ACK_NOTIFICATION 1 // Default: 1
/**
* Files Sorting
* Sort files and folders based on the selected option.
*
* NOTE: Only applicable for files in TFT SD card and TFT USB disk.
*
* Options: [Date Newest First: 0, Date Oldest First: 1, Name Ascending: 2, Name Descending: 3]
*/
#define FILES_SORT_BY 0 // Default: 0
/**
* Files List Mode
* Display files in list mode instead of icon mode.
* Options: [disable: 0, enable: 1]
*/
#define FILES_LIST_MODE 1 // Default: 1
/**
* Filename Extension
* Display fullname for files listed in List Mode / Icon Mode menu.
* If disabled, any filename extension starting with ".g" or ".G" (e.g. ".g", ".gco", ".gcode" etc.) will be hidden.
* Options: [disable: 0, enable: 1]
*/
#define FILENAME_EXTENSION 1 // Default: 1
/**
* Fan Speed In Percentage
* Show fan speed in percentage. If disabled fan speed will be displayed as PWM values.
* Options: [disable: 0, enable: 1]
*/
#define FAN_SPEED_PERCENTAGE 1 // Default: 1
/**
* Persistent Temperature Info
* Show persistent temperature info in all menus.
* Options: [disable: 0, enable: 1]
*/
#define PERSISTENT_INFO 0 // Default: 0
/**
* Temperature And Wait ACK In Terminal
* Show "temperature" and "wait" ACK in Terminal menu.
* Options: [disable: 0, enable: 1]
*/
#define TERMINAL_ACK 0 // Default: 0
/**
* Notification M117
* If enabled, any notification received from Marlin through "//action:notification" is also
* stored on the notification screen. The notification screen reporting the history of the
* received notifications is displayed pressing on the notification bar.
*
* NOTE: Marlin notifications are also always displayed on the Status Screen menu.
* Furthermore, they are also displayed on the notification bar as toast messages
* in case the current menu is not the Status Screen menu.
*
* Options: [disable: 0, enable: 1]
*/
#define NOTIFICATION_M117 0 // Default: 0
/**
* Progress Source
* This sets the source of the progress calculation, G-code file advance based mode or time based mode:
* - File mode is a simple file progress, it tells you the percentage of the G-codes executed.
* It doesn't reflect the amount of work done, only in a very few cases (ex. a 2D shape expanded
* vertically like a cylinder, cube etc.).
* - Time mode is very close to the real amount of work done, but it is still not perfect and it relies
* on the estimate the slicer has done (see notes below).
*
* NOTES:
* - Time mode needs info from the G-code file such as the elapsed time or the remaining time. This info
* can be supplied as "M73 Rxx" G-code or as comment. Both must be generated by the slicer. If comment
* is used than "FILE_COMMENT_PARSING" has to be enabled for it to take effect.
* If that info is missing (comment or "M73 Rxx"), the progress source defaults to option 0 (file mode).
* - If "M73 Pxx" is present in the G-code file then file or time based progress modes will be overriden
* by that.
*
* Options: [File mode: 0, Time mode: 1]
*/
#define PROG_SOURCE 1
/**
* Progress Numeric Display Mode During Print
* This sets the default display type for print progress numeric display. It can be changed during
* print by pressing the hourglass icon. At each click it will alter between the 3 variants.
*
* NOTE: It needs info from the G-code file such as the elapsed time or the remaining time. This info can
* be supplied as "M73 Rxx" G-code or as comment. Both must be generated by the slicer. If comment
* is used than "FILE_COMMENT_PARSING" has to be enabled for it to take effect.
* If that info is missing (comment or "M73 Rxx"), the display defaults to option 0 (percentage &
* elapsed time).
*
* Options: [Percentage & Elapsed time: 0, Percentage & Remaining time: 1, Elapsed time & Remaining time: 2]
*/
#define PROG_DISP_TYPE 2 // Default: 2
/**
* Current Layer Display Mode During Print
* This sets the default display type for the printing layer. It can be changed during print by
* pressing the nozzle icon. At each click it will alter between the 3 variants.
*
* NOTES:
* - It requires "FILE_COMMENT_PARSING" to be enabled.
* - This feature uses the layer number comments added by slicers at the starting of each layer.
* - Some slicers may not include the total number of layers in the G-code file. In this case only
* the current layer will be displayed. To display total number of layers, a comment should be
* added at the beginning of the G-code file in the format "; Layer count: xx".
* Separators can be " ", ":", "_" or "=".
* - If the total number of layers exceeds 999, this information will not be displayed because
* there is not enough space for both current and total layer number to be shown.
* - If PrusaSlicer is used, to enable the layer number display, the following comment lines must
* be added in Printer Settings -> Custom G-code section:
* - In After layer change G-code section:
* ";LAYER:[layer_num]"
* - In Start G-code section:
* ";LAYER_COUNT:[total_layer_count]"
*
* Options: [Layer height: 0, Layer number: 1, Both - height & number: 2]
*/
#define LAYER_DISP_TYPE 0 // Default: 0
//================================================================================
//============================= Marlin Mode Settings =============================
//========== (only for TFT24 V1.1 & TFT28/TFT35/TFT43/TFT50/TFT70 V3.0) ==========
//================================================================================
/**
* Default Mode
* Set Marlin/Touch Mode as the default mode at startup.
*
* NOTE: Mode switching is possible only for Marlin Mode and Touch Mode by a long press of
* 1.5 seconds on the display or holding down the encoder button for 1.5 seconds.
*
* Options: [Marlin Mode: 0, Touch Mode: 1, Blocked Marlin Mode: 2, Blocked Touch Mode: 3]
*/
#define DEFAULT_MODE 1 // Default: 1
/**
* Serial Always ON
* Keep UART (serial communication) alive in Marlin Mode.
* Allows seamless OctoPrint UART connection to the TFT's UART/serial expansion port
* no matter which mode the TFT is in.
* Options: [disable: 0, enable: 1]
*/
#define SERIAL_ALWAYS_ON 0 // Default: 0
/**
* Marlin Mode Background & Font Colors
* Set colors used in Marlin Mode.
*
* NOTE: Select an option from the provided list or set the color (RGB888 format) hex value directly
* (start with "0x"), such as: Red: 0xFF0000, Green: 0x00FF00, Blue: 0x0000FF.
*
* Options: [ WHITE: 0, BLACK: 1, RED: 2, GREEN: 3, BLUE: 4, CYAN: 5, MAGENTA: 6, YELLOW: 7,
* ORANGE: 8, PURPLE: 9, LIME: 10, BROWN: 11, DARKBLUE: 12, DARKGREEN: 13, GRAY: 14, DARKGRAY: 15]
*/
#define MARLIN_BACKGROUND_COLOR 1 // Marlin Mode background color (Default: 1)
#define MARLIN_FONT_COLOR 0 // Marlin Mode font color (Default: 0)
/**
* Fullscreen Marlin Mode
* Run Marlin Mode in fullscreen.
*
* NOTE: Disable is recommended for TFT24.
*
* Options: [disable: 0, enable: 1]
*/
#define MARLIN_FULLSCREEN 0 // Default: 0
/**
* Show Marlin Mode Title
* Show banner text at the top of the TFT in Marlin Mode.
* Options: [disable: 0, enable: 1]
*/
#define MARLIN_SHOW_TITLE 0 // Default: 0
/**
* Marlin Mode Title
* Banner text displayed at the top of the TFT in Marlin Mode.
* Value range: [min: 3, max: 20 characters]
*/
#define MARLIN_TITLE "Marlin Mode" // Default: "Marlin Mode"
/**
* Marlin Mode Type
* Select Marlin Mode type.
* Options: [128x64 Full Graphic LCD: 0, 20x4 Character LCD: 1]
*/
#define MARLIN_TYPE 0 // Default: 0
//================================================================================
//========================== Printer / Machine Settings ==========================
//================================================================================
/**
* Hotend Count
* Value range: [min: 0, max: 6]
*/
#define HOTEND_COUNT 1 // Default: 1
/**
* Heated Bed Support
* Enable/disable presence of heated bed.
*
* NOTE: Disable it to let the TFT auto-detect if bed heating is enabled in Marlin firmware.
*
* Options: [disable: 0, enable: 1]
*/
#define HEATED_BED 1 // Default: 1
/**
* Heated Chamber Support
* Enable/disable presence of heated chamber.
*
* NOTE: Disable it to let the TFT auto-detect if chamber heating is enabled in Marlin firmware.
*
* Options: [disable: 0, enable: 1]
*/
#define HEATED_CHAMBER 0 // Default: 0
/**
* Extruder Count
* Set extruder count.
*
* NOTE: This value is overridden by the TFT if provided by Marlin firmware.
*
* Value range: [min: 0, max: 6]
*/
#define EXTRUDER_COUNT 1 // Default: 1
// For mixing extruder set to 1 (this option turns off auto detection of the number of extruders)
#define MIXING_EXTRUDER 0 // Default: 0
/**
* Fan Count
* Value range: [min: 1, max: 6]
*/
#define FAN_COUNT 1 // Default: 1
/**
* Controller Fan Support
* Enable/disable controller fan speed control for Active and Idle cooling if Marlin
* firmware supports controller fan (M710).
* Options: [disable: 0, enable: 1]
*/
#define CONTROLLER_FAN 0 // Default: 0
/**
* Bed / Extruder / Chamber Maximum Temperatures
* Format: [max_temp: T0:<max temp> T1:<max temp> T2:<max temp> T3:<max temp> T4:<max temp> T5:<max temp> BED:<max temp> CHAMBER:<max temp>]
* Unit: [temperature in °C]
* Value range: hotend: [min: 20, max: 1000]
* bed: [min: 20, max: 400]
* chamber: [min: 20, max: 200]
*/
#define MAX_TEMP {275, 275, 275, 275, 275, 275, 150, 60} // Default: {275, 275, 275, 275, 275, 275, 150, 60}
/**
* Cold Extrusion Minimum Temperature
* Minimum temperature needed to extrude/retract.
* Any extrusion/retraction below this temperature will be prevented.
* Unit: [temperature in °C]
* Value range: [min: 20, max: 1000]
*/
#define MIN_TEMP 180 // Default: 180
/**
* Fan Maximum PWM Speed
* Set minimum and maximum fan speed allowed by the printer for Cooling Fans & Controller Fan.
* Cooling fans have index from F0 to F5.
* Controller fan has index CtA and CtI (Active and Idle). It requires "CONTROLLER_FAN" to be enabled.
* Format: [fan_max: F0:<max PWM> F1:<max PWM> F2:<max PWM> F3:<max PWM> F4:<max PWM> F5:<max PWM> CtA:<max PWM> CtI:<max PWM>]
* Unit: [PWM]
* Value range: [min: 25, max: 255]
*/
#define FAN_MAX {255, 255, 255, 255, 255, 255, 255, 255} // Default: {255, 255, 255, 255, 255, 255, 255, 255}
/**
* Machine Size / Build Area
* The TFT will auto-detect the machine size (min and max) in Marlin firmware (requires
* enabling "M115_GEOMETRY_REPORT" in Configuration_adv.h in Marlin firmware).
* Format: [size_min: X<minimum distance> Y<minimum distance> Z<minimum distance>]
* [size_max: X<maximum distance> Y<maximum distance> Z<maximum distance>]
* Unit: [distance in mm]
* Value range: [min: -2000, max: 2000]
*/
#define X_MIN_POS 0 // Default: 0
#define Y_MIN_POS 0 // Default: 0
#define Z_MIN_POS 0 // Default: 0
#define X_MAX_POS 235 // Default: 235
#define Y_MAX_POS 235 // Default: 235
#define Z_MAX_POS 250 // Default: 250
/**
* X & Y Move Speeds/Feedrates
* Move speeds used in Move menu to move X and Y axes.
* Format: [move_speed: S<feedrate> N<feedrate> F<feedrate>]
* Unit: [feedrate in mm/min]
* Value range: [min: 10, max: 12000]
*/
#define SPEED_XY_SLOW 1000 // Default: 1000
#define SPEED_XY_NORMAL 3000 // Default: 3000
#define SPEED_XY_FAST 5000 // Default: 5000
/**
* Z Speeds/Feedrates
* Move speeds used in Move menu to move Z axis.
* Format: [move_speed: S<feedrate> N<feedrate> F<feedrate>]
* Unit: [feedrate in mm/min]
* Value range: [min: 10, max: 12000]
*/
#define SPEED_Z_SLOW 500 // Default: 500
#define SPEED_Z_NORMAL 1000 // Default: 1000
#define SPEED_Z_FAST 2000 // Default: 2000
/**
* Extruder Speeds/Feedrates
* Speed settings used to extrude/retract.
* Format: [ext_speed: S<feedrate> N<feedrate> F<feedrate>]
* Unit: [feedrate in mm/min]
* Value range: [min: 10, max: 12000]
*/
#define EXTRUDE_SLOW_SPEED 60 // Default: 60
#define EXTRUDE_NORMAL_SPEED 600 // Default: 600
#define EXTRUDE_FAST_SPEED 1200 // Default: 1200
/**
* Auto Load Bed Leveling Data
* If enabled, load bed leveling data and turn leveling on at startup sending gcode "M420 S1".
*
* NOTE: If enabled, it is required:
* 1) EEPROM and a bed leveling type (e.g. UBL) enabled in Marlin.
* 2) A valid mesh saved on EEPROM (it is required to enable bed leveling).
* If the mesh is invalid / incomplete leveling will not be enabled.
*
* Options: [disable: 0, enable: 1]
*/
#define AUTO_LOAD_LEVELING 0 // Default: 0
/**
* Onboard / Printer Media
* Starting from Marlin Bugfix 2.0.x Distribution Date: 2020-04-27 & above, the TFT will auto detect
* onboard media and auto-configure M27 AutoReport with M115 command.
* Set the time interval to poll SD Printing status if Marlin reports M27 AutoReport as disabled.
*/
/**
* Onboard / Printer Media Support
* Enable/disable presence of onboard media.
*
* NOTE: Auto-detect option is currently available (supported) by Marlin firmware.
* Auto-detect is not available for other firmwares like Smoothieware.
*
* Options: [disable: 0, enable: 1, auto-detect: 2]
*/
#define ONBOARD_SD 2 // Default: 2
/**
* M27 Printing Status Refresh Time
* M27 printing status refresh time (this will be used if SD_AUTOREPORT is not detected by the TFT).
* Unit: [time in seconds]
* Value range: [min: 1, max: 100]
*/
#define M27_REFRESH_TIME 3 // Default: 3
/**
* M27 Always Active
* Keep polling M27 even if not printing (e.g. SD print not started from TFT).
* Options: [disable: 0, enable: 1]
*/
#define M27_ALWAYS_ACTIVE 1 // Default: 1
/**
* Long File Names Support
* Enable/disable support to long file names.
*
* NOTE: Auto-detect option is currently available (supported) by Marlin firmware.
* Auto-detect is not available for other firmwares like Smoothieware.
*
* Options: [disable: 0, enable: 1, auto-detect: 2]
*/
#define LONG_FILENAME 2 // Default: 2
/**
* Pause/Nozzle Park Settings
* These settings are used when a print is paused or in any feature which requires moving/parking the nozzle
* before performing a task like in (Un)Load or Extruder Tuning menus.
*
* Pause Retract Length
* Format: [pause_retract: R<retract length> P<resume purge length>]
* Unit: [length in mm]
* Value range: [min: 0.0, max: 20.0]
*
* Pause XY Position
* NOTES:
* - It MUST BE a value >= 0 for a Cartesian printer.
* - It MUST BE a value <= 0 for a Delta printer.
*
* Format: [pause_pos: X<position> Y<position>]
* Unit: [position in mm]
* Value range: [min: -2000.0, max: 2000.0]
*
* Pause Z Raise
* Raise Z axis by this value relative to the current layer height.
* Unit: [distance in mm]
* Value range: [min: 0.0, max: 2000.0]
*
* Pause Feed Rate
* Feedrate to use when moving an axis when printing is paused.
* Format: [pause_feedrate: XY<feedrate> Z<feedrate> E<feedrate>]
* Unit: [feedrate in mm/min]
* Value range: [min: 10, max: 12000]
*/
#define NOZZLE_PAUSE_RETRACT_LENGTH 15.0f // (mm) (Default: 15.0f)
#define NOZZLE_RESUME_PURGE_LENGTH 16.0f // (mm) (Default: 16.0f)
#define NOZZLE_PAUSE_X_POSITION (X_MIN_POS + 10.0f) // (mm) (Default: 10.0f)
#define NOZZLE_PAUSE_Y_POSITION (Y_MIN_POS + 10.0f) // (mm) (Default: 10.0f)
#define NOZZLE_PAUSE_Z_RAISE 10.0f // (mm) (Default: 10.0f)
#define NOZZLE_PAUSE_XY_FEEDRATE 6000 // (mm/min) X and Y axes feedrate (Default: 6000)
#define NOZZLE_PAUSE_Z_FEEDRATE 6000 // (mm/min) Z axis feedrate (Default: 6000)
#define NOZZLE_PAUSE_E_FEEDRATE 600 // (mm/min) retract & purge feedrate (Default: 600)
/**
* Leveling Settings
* These settings are used for leveling.
*
* Leveling Edge Distance (Manual Leveling, Leveling Corner)
* Inset distance from bed edges. This distance is added to minimum X & Y bed coordinates and
* subtracted from maximum X & Y bed coordinates to calculate manual leveling points.
* For Leveling Corner, the default distance is the maximum between this setting value and
* the rounded probe offset X/Y values configured in Marlin firmware.
* Unit: [distance in mm]
* Value range: [min: 0, max: 2000]
*
* Leveling Z Position (Manual Leveling, Leveling Corner, Mesh Leveling, Probe/Home Offset, Mesh Tuner)
* For Manual Leveling and MBL, lower Z axis to this absolute position after reaching a leveling point.
* For Probe/Home Offset and ABL in Mesh Tuner, raise Z axis by this relative position after reaching
* a leveling point.
* Unit: [position in mm]
* Value range: [min: 0.0, max: 2000.0]
*
* Leveling Z Raise (Manual Leveling, Leveling Corner, Mesh Leveling)
* Raise Z axis by this relative value before moving to another point during leveling/probing procedures.
* Unit: [distance in mm]
* Value range: [min: 0.0, max: 2000.0]
*
* Leveling Feed Rate (Manual Leveling, Leveling Corner, Mesh Leveling)
* Feedrate to use when moving an axis during leveling/probing procedures.
* Format: [level_feedrate: XY<feedrate> Z<feedrate>]
* Unit: [feedrate in mm/min]
* Value range: [min: 10, max: 12000]
*/
#define LEVELING_EDGE_DISTANCE 20 // (mm) Inset distance from bed's edge for calculating leveling point location (Default: 20)
#define LEVELING_Z_POS 0.2f // (mm) Z-axis position when nozzle stays for leveling (Default: 0.2f)
#define LEVELING_Z_RAISE 10.0f // (mm) Z-axis position when nozzle move to next point (Default: 10.0f)
#define LEVELING_XY_FEEDRATE 6000 // (mm/min) X and Y axes move feedrate (Default: 6000)
#define LEVELING_Z_FEEDRATE 6000 // (mm/min) Z axis move feedrate (Default: 6000)
/**
* Inverted Axes (Manual Leveling, Leveling Corner, Move, Probe Offset)
* Used by Manual Leveling, Leveling Corner, Move and Probe Offset menus in order axis matches the actual axis movement.
*
* NOTE: The Y axis of different printer (move hotbed or move nozzle) move in different directions.
* So Y axis leveling inversion can't follow up inverted_axis[Y_AXIS].
* We separate a single variable "LY" (Leveling Y axis) to deal with the Y axis leveling movement direction.
*
* Format: [X<option> Y<option> Z<option> LY<option>]
* Options: [disable: 0, enable: 1]
*/
#define INVERTED_X_AXIS 0 // Default: 0
#define INVERTED_Y_AXIS 0 // Default: 0
#define INVERTED_Z_AXIS 0 // Default: 0
#define INVERTED_LY_AXIS 0 // Default: 0
/**
* Probing For Z Offset (Probe Offset)
* Used by the Probe Offset menu for the Z offset tuning process.
* If enabled, after homing a probing in the center of the bed is performed and then the nozzle
* is moved to the XY probing point.
* If disabled, after homing the nozzle is moved directly to the XY homing point. This is useful
* in case Marlin firmware is configured to use the probe for Z axis homing (e.g.
* "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware) to avoid a second probing after homing.
*
* NOTES:
* - Enable it in case Marlin firmware is not configured to use the probe for Z axis homing
* (e.g. "USE_PROBE_FOR_Z_HOMING" disabled in Marlin firmware) or the XY probing point set
* for homing is not reachable by the nozzle (e.g. due to HW limitations/constraints or
* printer specific configuration).
* - Disable it (preferably) in case Marlin firmware is configured to use the probe for Z axis
* homing (e.g. "USE_PROBE_FOR_Z_HOMING" enabled in Marlin firmware).
*
* Options: [disable: 0, enable: 1]
*/
#define PROBING_Z_OFFSET 1 // Default: 1
/**
* Probing Z Raise (Probe Offset, Mesh Editor)
* Used by the Probe Offset / Mesh Editor menu for the Z offset / Z height tuning process.
* Raise / drop Z axis by this relative value after homing (G28) before starting to probe a point.
*
* NOTES:
* - It MUST BE a value >= 0 (e.g. 20) for a Cartesian printer to avoid crashing into the bed.
* - It MUST BE a value <= 0 (e.g. -50) for a Delta printer to avoid crashing into the top of the tower.
*
* Unit: [distance in mm]
* Value range: [min: -2000.0, max: 2000.0]
*/
#define PROBING_Z_RAISE 20.0f // Default: 20.0f
/**
* Z Steppers Auto-Alignment (ABL)
* It allows to align multiple Z stepper motors using a bed probe by probing one position per stepper.
* Enable this setting to show an icon in ABL menu allowing to run G34 command (it requires
* "Z_STEPPER_AUTO_ALIGN" enabled in Configuration_adv.h in Marlin firmware).
*
* NOTE: Only for Marlin printers with one stepper driver per Z stepper motor and no Z timing belt.
*
* Options: [disable: 0, enable: 1]
*/
#define Z_STEPPERS_ALIGNMENT 0 // Default: 0
/**
* TouchMI Settings (ABL)
* Enable this option for displaying TouchMI sensor settings in ABL menu (Init, Z Offset, Save, Test).
* Options: [disable: 0, enable: 1]
*/
#define TOUCHMI_SENSOR 0 // Default: 0
/**
* Preheat Temperatures
* Format: [preheat_name_X:<name>]
* [preheat_temp_X:T<hotend temp> B<bed temp>]
* Unit: [temperature in °C]
* Value range: name: [min: 3, max: 20 characters]
* hotend temp: [min: 20, max: 1000]
* bed temp: [min: 20, max: 400]
*/
#define PREHEAT_LABELS {"PLA", "PETG", "ABS", "WOOD", "TPU", "NYLON"} // Default: {"PLA", "PETG", "ABS", "WOOD", "TPU", "NYLON"}
#define PREHEAT_HOTEND {200, 240, 230, 170, 220, 250} // Default: {200, 240, 230, 170, 220, 250}
#define PREHEAT_BED { 60, 70, 90, 50, 50, 90} // Default: { 60, 70, 90, 50, 50, 90}
//================================================================================
//============================ Power Supply Settings =============================
//==================== (only if connected to TFT controller) =====================
//================================================================================
/**
* Active HIGH Power Supply Logic
* Used in case it is supported by the TFT.
* The power supply uses this HIGH signal logic to stay ON.
* The power supply uses the opposite of this logic to stay OFF.
* Options: [disable: 0, enable: 1]
*/
#define PS_ACTIVE_HIGH 1 // Default: 1
/**
* Power Supply Auto Shutdown Mode
* Used in case it is supported by the TFT.
* Enable power supply auto shutdown after a print is finished when hotend temperature drops below target value.
* Options: [disable: 0, enable: 1, auto-detect: 2]
*/
#define PS_AUTO_SHUTDOWN 0 // Default: 0
/**
* Power Supply Auto Shutdown Temperature
* Maximum hotend temperature for automatic shutdown after printing, if automatic shutdown is enabled.
* The printer will shutdown automatically if the hotend temperature is below this value.
* If the hotend temperature is higher than this value the fans will be turned on to cooldown and it
* will wait for the hotend temperature to drop below this value before shutting down automatically.
* Unit: [temperature in °C]
* Value range: [min: 20, max: 1000]
*/
#define PS_AUTO_SHUTDOWN_TEMP 50 // Default: 50
//================================================================================
//=========================== Filament Runout Settings ===========================
//==================== (only if connected to TFT controller) =====================
//================================================================================
/**
* NOTES for users having a filament sensor connected to the mainboard:
* 1) Define "FIL_RUNOUT 0" below to disable the sensor handling on the TFT.
* 2) Configure the sensor in the firmware of your mainboard.
* 3) Add M75 to "START_GCODE" and M77 to "END_GCODE" of the TFT (or your slicer).
*/
/**
* Filament Runout Sensor
* Select the type of filament runout sensor and its default enabled/disabled state.
*
* NOTE: Smart Filament Sensor (SFS) (value 2 or 3) is a sensor based on an encoder disc that
* toggles runout pin as filament moves (e.g. the BigTreeTech SFS).
*
* Options: [Normal Disabled: 0, Normal Enabled: 1, Smart Disabled: 2, Smart Enabled: 3]
*/
#define FIL_RUNOUT 0 // Default: 0
/**
* Inverted Filament Runout Sensor Logic
* The sensor uses an inverted logic.
* Disable it in case filament runout is triggered by a LOW signal.
* Enable it in case filament runout is triggered by a HIGH signal.
* Options: [disable: 0, enable: 1]
*/
#define FIL_RUNOUT_INVERTED 1 // Default: 1
/**
* NC (Normal Close) Filament Runout Sensor
* The sensor is of type NC.
* Options: [Normal Open: 0, Normal Close: 1]
*/
#define FIL_RUNOUT_NC 1 // Default: 1
/**
* Filament Runout Noise Threshold
* Pause print when filament runout is detected at least for this time period.
* Unit: [time in milliseconds]
* Value range: [min: 10, max: 1800]
*/
#define FIL_RUNOUT_NOISE_THRESHOLD 100 // Default: 100
/**
* Smart Filament Runout Detection
* Used in conjunction with an SFS (Smart Filament Sensor) based on an encoder disc that
* toggles runout pin as filament moves.
*
* NOTE: This setting is taken into account by the TFT only in case "FIL_RUNOUT" setting is
* set to 2 or 3 (an SFS is used).
*
* Unit: [distance in mm]
* Value range: [min: 1, max: 50]
*/
#define FIL_RUNOUT_DISTANCE 7 // Default: 7
//================================================================================
//==================== Power Loss Recovery & BTT UPS Settings ====================
//================================================================================
/**
* Most suitable for Delta printers since most printers will
* crash into printed model when homing after power loss.
*/
/**
* Power Loss Recovery Mode
* Enable/disable power loss recovery mode.
* If enabled, a recovery file named "Printing.sys", created in the same media (e.g. TFT SD card) of the file
* that is being printed, containing the current print status is updated during the print and deleted on print
* completion. In case of a power failure, the recovery file is used to restore the print from the outage point.
* After a power failure, a popup message asking to restore the failed print is prompted when browsing the media
* containing the recovery file.
*
* NOTE: Disable it in case issues such as the loss of media (e.g. read error messages from TFT SD card) during
* the print are experienced.
*
* Options: [disable: 0, enable: 1]
*/
#define PL_RECOVERY 1 // Default: 1
/**
* Power Loss Recovery Homing
* Home before power loss recovery.
* Options: [disable: 0, enable: 1]
*/
#define PL_RECOVERY_HOME 0 // Default: 0
/**
* Power Loss Recovery Z Raise
* Raise Z axis on resume (on power loss with UPS).
* Unit: [distance in mm]
* Value range: [min: 0.0, max: 2000.0]
*/
#define PL_RECOVERY_Z_RAISE 10.0f // Default: 10.0f
/**
* BTT Mini UPS Support
* Enable backup power/UPS to move Z axis on power loss.
* Options: [disable: 0, enable: 1]
*/
#define BTT_MINI_UPS 0 // Default: 0
//================================================================================
//======================== Other Device-Specific Settings ========================
//================================================================================
/**
* Sounds / Buzzer
* Set sound ON or OFF.
*
* NOTE: Error messages from printer will always play the error sound.
*
* Settings:
* touch_sound: Enable/disable this to control touch feedback sound.
* toast_sound: Enable/disable this to control all toast notification sounds.
* alert_sound: Enable/disable this to control all popup and alert sounds
* like print finish alert, dialog sound etc.
* heater_sound: Enable/disable this to control acoustic feedback when temperature
* has reached the desired value on heaters (nozzle, bed, chamber).
*
* Options: [disable: 0, enable: 1]
*/
#define TOUCH_SOUND 1 // Default: 1
#define TOAST_SOUND 1 // Default: 1
#define ALERT_SOUND 1 // Default: 1
#define HEATER_SOUND 1 // Default: 1
/**
* LCD Brightness Levels (only for TFT28/TFT35/TFT43/TFT50/TFT70 V3.0)
* Brightness levels for LCD.
* Options: [OFF: 0, 5%: 1, 10%: 2, 20%: 3, 30%: 4, 40%: 5, 50%: 6, 60%: 7, 70%: 8, 80%: 9, 90%: 10, 100%: 11]
*/
#define LCD_BRIGHTNESS 11 // LCD brightness level (Default: 11)
#define LCD_IDLE_BRIGHTNESS 5 // LCD brightness level when device is idle (Default: 5)
/**
* LCD Idle Time (only for TFT28/TFT35/TFT43/TFT50/TFT70 V3.0)
* The LCD screen will dim to idle brightness, if the display is not touched for the
* period of the LCD idle time.
* Options: [OFF: 0, 5sec: 1, 10sec: 2, 30sec: 3, 1min: 4, 2min: 5, 5min: 6, 10min: 7]
*/
#define LCD_IDLE_TIME 0 // Default: 0
// Custom value in seconds. This will be used if LCD_IDLE_TIME is set to 7 (CUSTOM Seconds)
#define IDLE_TIME_CUSTOM (10 * 60) // Default: 10 * 60
/**
* LCD Lock On Idle (only for TFT28/TFT35/TFT43/TFT50/TFT70 V3.0)
* If enabled, when the LCD is idle (dimmed) then the first touch on the display will
* simply restore the normal LCD brightness. The touch is then skipped, preventing to
* trigger any undesired action due to the dimmed display.
*
* NOTE: The lock is always avoided if the LCD brightness is restored by the use of
* rotary encoder instead of touching the display.
*
* Options: [disable: 0, enable: 1]
*/
#define LCD_LOCK_ON_IDLE 0 // Default: 0
/**
* LED Color
* Printer's LED color used by some features such as Event LED and PID processes.
* Format: [led_color: R:<component> G:<component> B:<component> W:<component> P:<component> I:<component>
* Target component: R: Red
* G: Green
* B: Blue
* W: White; NEOPIXEL or RGB(W)
* P: Intensity; NEOPIXEL