HyperHDR/WLED - No lights #448

pbnj4640 · 2022-12-07T15:46:58Z

pbnj4640
Dec 7, 2022

So I have gone through wiring, rewiring, checking, testing, etc.

My WLED installation works fine. Colors, effects, etc, no issues. However, when I attempt to setup HyperHDR, it tells me it's connected, my grabber works, but the lights are just not on?

I even tried effects from HyperHDR and there is no response from the lights. Below is my log.

2022-12-07T13:57:09.195Z [JSONSERVER] (JsonServer.cpp:88) New connection from: ::ffff:192.168.1.131
2022-12-07T13:57:09.195Z [JSONCLIENTCONNECTION] (JsonAPI.cpp:97) Client '::ffff:192.168.1.199' switch to HyperHDR instance 0
2022-12-07T13:57:11.075Z [JSONSERVER] (JsonServer.cpp:88) New connection from: ::ffff:192.168.1.131
2022-12-07T13:57:11.075Z [JSONCLIENTCONNECTION] (JsonAPI.cpp:97) Client '::ffff:192.168.1.199' switch to HyperHDR instance 0
2022-12-07T15:28:54.332Z [MUXER0] Priority 240 is now active
2022-12-07T15:28:56.003Z [MUXER0] Priority 240 is now inactive
2022-12-07T15:28:58.010Z [MUXER0] Priority 240 is now active
2022-12-07T15:29:38.118Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T15:29:38.119Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T15:29:45.795Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"wled","subcommand":"discover","tan":952}]
2022-12-07T15:29:45.796Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:227) devicesDiscovered: [{"devices":[{"name":"192.168.1.198 (ambilight.local.)","value":"192.168.1.198"}],"ledDeviceType":"wled"}]
2022-12-07T15:29:45.797Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"192.168.1.198 (ambilight.local.)","value":"192.168.1.198"}],"ledDeviceType":"wled"}]
2022-12-07T15:30:12.633Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T15:30:12.634Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T15:30:13.164Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"wled","subcommand":"discover","tan":61}]
2022-12-07T15:30:13.165Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:227) devicesDiscovered: [{"devices":[{"name":"192.168.1.223 (wled-74f659.local.)","value":"192.168.1.223"}],"ledDeviceType":"wled"}]
2022-12-07T15:30:13.165Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"192.168.1.223 (wled-74f659.local.)","value":"192.168.1.223"}],"ledDeviceType":"wled"}]
2022-12-07T15:30:29.681Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0]
2022-12-07T15:30:39.629Z [LEDDEVICE_WLED] (LedDevice.cpp:63) Stop device
2022-12-07T15:30:39.629Z [LEDDEVICE_WLED] (LedDevice.cpp:134) Disable device
2022-12-07T15:30:39.630Z [LEDDEVICE_WLED] Stopped LedDevice 'wled'
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] Start LedDevice 'wled'.
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:51)
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDevice.cpp:162) deviceConfig: [{"colorOrder":"grb","currentLedCount":614,"hardwareLedCount":null,"host":"192.168.1.223","maxRetry":60,"refreshTime":0,"type":"wled"}]
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDevice.cpp:226) RefreshTime updated to 0ms
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:59) DeviceType : wled
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:60) LedCount : 614
2022-12-07T15:30:39.631Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:63) Max retry : 60
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:105)
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:116) [1]
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDevice.cpp:162) deviceConfig: [{"colorOrder":"grb","currentLedCount":614,"hardwareLedCount":null,"host":"192.168.1.223","maxRetry":60,"port":19446,"refreshTime":0,"type":"wled"}]
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDevice.cpp:226) RefreshTime updated to 0ms
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (ProviderUdp.cpp:69) Successfully parsed 192.168.1.223 as an IP-address.
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (ProviderUdp.cpp:99) UDP socket will write to 192.168.1.223:19446
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:94) Hostname/IP : 192.168.1.223
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:95) Port : 19446
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:99) [1]
2022-12-07T15:30:39.632Z [LEDDEVICE_WLED] (LedDevice.cpp:100) Enable device
2022-12-07T15:30:39.633Z [LEDDEVICE_WLED] (LedDevice.cpp:308) Switch on
2022-12-07T15:30:39.633Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:128)
2022-12-07T15:30:39.633Z [LEDDEVICE] (ProviderRestApi.cpp:172) PUT begin: [http://192.168.1.223/json/state] [{"on":true,"live":true}]
2022-12-07T15:30:39.721Z [LEDDEVICE] (ProviderRestApi.cpp:188) PUT end (87 ms): [http://192.168.1.223/json/state] [{"on":true,"live":true}]
2022-12-07T15:30:39.721Z [LEDDEVICE] (ProviderRestApi.cpp:302) Reply.httpStatusCode [200]
2022-12-07T15:30:39.721Z [COMPONENTREG0] LED device: enabled
2022-12-07T15:30:39.721Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T15:31:29.673Z [V4L2:AUTO] Video cache: enabled, size: 1, hits: 3596, needed: 1, cleanup: 0, limit: 8
2022-12-07T15:31:34.515Z [MUXER0] Removed source priority 128
2022-12-07T15:31:34.517Z [MUXER0] Set visible priority to 240
2022-12-07T15:31:34.517Z [HYPERHDR0] New priority[240], previous [128]
2022-12-07T15:31:43.278Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.231/COLOR' with priority 1 as inactive
2022-12-07T15:31:43.278Z [MUXER0] (PriorityMuxer.cpp:219) Priority 1 is now active
2022-12-07T15:31:43.279Z [MUXER0] Set visible priority to 1
2022-12-07T15:31:43.279Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T15:31:59.083Z [MUXER0] Removed source priority 1
2022-12-07T15:31:59.083Z [MUXER0] Set visible priority to 240
2022-12-07T15:31:59.083Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T15:32:09.542Z [EFFECTENGINE0] Run effect "Blue mood blobs" on channel 1
2022-12-07T15:32:09.544Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Blue mood blobs], smoothCfg [2]
2022-12-07T15:32:09.544Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.231/EFFECT' with priority 1 as inactive
2022-12-07T15:32:09.548Z [EFFECT0(Blue m...)] Begin playing the effect with priority: 1
2022-12-07T15:32:09.553Z [MUXER0] (PriorityMuxer.cpp:219) Priority 1 is now active
2022-12-07T15:32:09.553Z [MUXER0] Set visible priority to 1
2022-12-07T15:32:09.554Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T15:32:09.554Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T15:32:09.554Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-12-07T15:32:09.554Z [SMOOTHING0] Using linear smoothing input (2)
2022-12-07T15:32:09.554Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T15:32:09.595Z [SMOOTHING0] Using linear smoothing procedure (2)
2022-12-07T15:32:20.047Z [MUXER0] Removed source priority 1
2022-12-07T15:32:20.047Z [MUXER0] Set visible priority to 240
2022-12-07T15:32:20.047Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T15:32:20.047Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T15:32:20.047Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 2, antiFlickTime: 0
2022-12-07T15:32:20.047Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T15:32:20.048Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T15:32:20.068Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T15:32:20.076Z [EFFECT0(Blue m...)] The effect quits with priority: 1
2022-12-07T15:32:20.076Z [EFFECTENGINE0] Effect 'Blue mood blobs' has finished.
2022-12-07T15:32:20.076Z [EFFECT0(Blue m...)] Deleting effect named: 'Blue mood blobs'
2022-12-07T15:32:20.076Z [EFFECT0(Blue m...)] Effect named: 'Blue mood blobs' is deleted
2022-12-07T15:32:20.153Z [EFFECTENGINE0] Run effect "Blue mood blobs" on channel 1
2022-12-07T15:32:20.153Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Blue mood blobs], smoothCfg [2]
2022-12-07T15:32:20.154Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.231/EFFECT' with priority 1 as inactive
2022-12-07T15:32:20.154Z [EFFECT0(Blue m...)] Begin playing the effect with priority: 1
2022-12-07T15:32:20.155Z [MUXER0] (PriorityMuxer.cpp:219) Priority 1 is now active
2022-12-07T15:32:20.155Z [MUXER0] Set visible priority to 1
2022-12-07T15:32:20.156Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T15:32:20.156Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T15:32:20.156Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-12-07T15:32:20.156Z [SMOOTHING0] Using linear smoothing input (2)
2022-12-07T15:32:20.156Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T15:32:20.196Z [SMOOTHING0] Using linear smoothing procedure (2)
2022-12-07T15:32:29.685Z [V4L2:AUTO] Video cache: enabled, size: 2, hits: 3597, needed: 1, cleanup: 0, limit: 8
2022-12-07T15:32:33.254Z [MUXER0] Removed source priority 1
2022-12-07T15:32:33.255Z [MUXER0] Set visible priority to 240
2022-12-07T15:32:33.255Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T15:32:33.255Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T15:32:33.255Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 2, antiFlickTime: 0
2022-12-07T15:32:33.255Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T15:32:33.255Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T15:32:33.276Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T15:32:33.284Z [EFFECT0(Blue m...)] The effect quits with priority: 1
2022-12-07T15:32:33.284Z [EFFECTENGINE0] Effect 'Blue mood blobs' has finished.
2022-12-07T15:32:33.284Z [EFFECT0(Blue m...)] Deleting effect named: 'Blue mood blobs'
2022-12-07T15:32:33.284Z [EFFECT0(Blue m...)] Effect named: 'Blue mood blobs' is deleted
2022-12-07T15:33:29.681Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 57.01, processed = 3420], [LED0: FPS = 48.50, send = 2910, processed = 2910]
2022-12-07T15:33:29.681Z [V4L2:AUTO] Video cache: enabled, size: 3, hits: 3595, needed: 1, cleanup: 0, limit: 8
2022-12-07T15:33:31.528Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 254
2022-12-07T15:33:31.529Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-12-07T15:33:31.529Z [MUXER0] Register new input 'System/EFFECT' with priority 254 as inactive
2022-12-07T15:33:31.530Z [HYPERHDR] Initial background effect 'Rainbow swirl fast' started
2022-12-07T15:33:31.532Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 254
2022-12-07T15:34:29.673Z [V4L2:AUTO] Video cache: enabled, size: 3, hits: 3596, needed: 0, cleanup: 0, limit: 8
2022-12-07T15:34:29.679Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.96, processed = 3598], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:35:29.685Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:35:29.685Z [V4L2:AUTO] Video cache: enabled, size: 2, hits: 3597, needed: 0, cleanup: 1, limit: 8
2022-12-07T15:35:38.663Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T15:35:38.663Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T15:36:29.685Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:37:29.682Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:38:24.121Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T15:38:24.122Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T15:38:29.685Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 8ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:39:29.524Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.212
2022-12-07T15:39:29.524Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.212' switch to HyperHDR instance 0
2022-12-07T15:39:29.685Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:39:30.881Z [WEBSOCKET] (JsonAPI.cpp:1250) log streaming activated for client ::ffff:192.168.1.212
2022-12-07T15:40:29.682Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:41:29.681Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:42:29.685Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:42:39.453Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"wled","subcommand":"discover","tan":269}]
2022-12-07T15:42:39.453Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:227) devicesDiscovered: [{"devices":[{"name":"192.168.1.223 (wled-74f659.local.)","value":"192.168.1.223"}],"ledDeviceType":"wled"}]
2022-12-07T15:42:39.453Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"192.168.1.223 (wled-74f659.local.)","value":"192.168.1.223"}],"ledDeviceType":"wled"}]
2022-12-07T15:42:39.467Z [WEBSOCKET] (JsonAPI.cpp:1259) log streaming deactivated for client ::ffff:192.168.1.212
2022-12-07T15:43:29.689Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:44:29.681Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 50.00, send = 3000, processed = 3000]
2022-12-07T15:45:26.440Z [WEBSOCKET] (JsonAPI.cpp:1250) log streaming activated for client ::ffff:192.168.1.212
2022-12-07T15:45:29.686Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 50.00, send = 3000, processed = 3000]

awawa-dev · 2022-12-07T15:53:52Z

awawa-dev
Dec 7, 2022
Maintainer

2022-12-07T15:30:39.633Z [LEDDEVICE] (ProviderRestApi.cpp:172) PUT begin: [http://192.168.1.223/json/state] [{"on":true,"live":true}]
2022-12-07T15:30:39.721Z [LEDDEVICE] (ProviderRestApi.cpp:188) PUT end (87 ms): [http://192.168.1.223/json/state] [{"on":true,"live":true}]
2022-12-07T15:30:39.721Z [LEDDEVICE] (ProviderRestApi.cpp:302) Reply.httpStatusCode [200]

TCP to wled works if WLED is 192.168.1.223. Colors are streamed using UDP and it's a stateless protocol so we don't know what's happening. And WLED page tells you that it's receiving the data when HyperHDR is streaming? What's the refresh rate in the WLED info panel?

Edit: Maybe firewall is blocking UDP?

1 reply

pbnj4640 Dec 7, 2022
Author

WLED does indeed say it's receiving data live data.

I've attached screenshots that may help?

awawa-dev · 2022-12-07T16:02:56Z

awawa-dev
Dec 7, 2022
Maintainer

Ok, I think I know: currentLedCount=614 it's too much to fit in the UDP frame (490).

5 replies

pbnj4640 Dec 7, 2022
Author

So 490 is essentially a hard cap on the software? I got 122/m LEDs for the density, but I can drop down to 60/m if that is necessary.

Edit: or would it work fine if i went with the hyperserial8266?

awawa-dev Dec 7, 2022
Maintainer

You can have 614 or even more using cable connection to WLED (HyperSerialWLED is recommended). BTW esp8266 is not the best solution for a such high number of LEDs, esp32 is preferable. But if it works for you smoothly (WLED effects, check framerate statistics) then probably you don't need to change it.

awawa-dev Dec 7, 2022
Maintainer

Yes, hyperserial8266 is even better because we don't need wifi.

awawa-dev Dec 7, 2022
Maintainer

Just make sure what serial chip do you have on your esp8266 board. Preferable it should be 2Mb capable, but even if the 2Mb doesn't work for your board, you can compile it for a lower speed e.g. 921600. Manual is here: https://github.com/awawa-dev/HyperSerialEsp8266/wiki

pbnj4640 Dec 7, 2022
Author

So, firstly, let me thank you for your quick response and all your help. I did everything you suggested, but it seems like something is still not quite right. I am still getting no lights, and no effects are working either.

Logs:

2022-12-07T16:45:44.167Z [WEBSERVER] Started on port 8090 name 'HyperHDR Webserver'
2022-12-07T16:45:44.196Z [WEBSERVER] Setup SSL certificate
2022-12-07T16:45:44.197Z [WEBSERVER] Setup private SSL key
2022-12-07T16:45:44.197Z [WEBSERVER] Started on port 8092 name 'HyperHDR Webserver'
2022-12-07T16:45:44.628Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.212
2022-12-07T16:45:44.629Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.212' switch to HyperHDR instance 0
2022-12-07T16:45:44.861Z [DB] Database opened: /home/pbnj4640/.hyperhdr/db/hyperhdr.db
2022-12-07T16:45:44.910Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 1 frames already dropped
2022-12-07T16:45:45.911Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 2 frames already dropped
2022-12-07T16:45:46.912Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 3 frames already dropped
2022-12-07T16:45:47.914Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 4 frames already dropped
2022-12-07T16:45:47.914Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:134) Disable device
2022-12-07T16:45:47.914Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:334) Switch off
2022-12-07T16:45:47.914Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:292) Set LED strip to black/power off
2022-12-07T16:45:48.915Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 5 frames already dropped
2022-12-07T16:45:48.915Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:90) Flush was successful
2022-12-07T16:45:48.915Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:92) Close UART: ttyAMA0
2022-12-07T16:45:48.915Z [LEDDEVICE_ADALIGHT] Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
2022-12-07T16:45:48.916Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:196) !_rs232Port.isOpen()
2022-12-07T16:45:48.916Z [LEDDEVICE_ADALIGHT] Opening UART: ttyAMA0
2022-12-07T16:45:48.916Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:138) _rs232Port.open(QIODevice::ReadWrite): ttyAMA0, Baud rate [921600]bps
2022-12-07T16:45:48.958Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:143) portName: ttyAMA0
2022-12-07T16:45:48.958Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:144) systemLocation: /dev/ttyAMA0
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:145) description:
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:146) manufacturer:
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:147) productIdentifier: 0x0
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:148) vendorIdentifier: 0x0
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:149) serialNumber:
2022-12-07T16:45:48.959Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:170) delayAfterConnect for 5000 ms - start
2022-12-07T16:45:54.141Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:177) delayAfterConnect for 5000 ms - finished
2022-12-07T16:45:55.143Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 0 frames already dropped
2022-12-07T16:45:56.146Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 1 frames already dropped
2022-12-07T16:45:56.147Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:90) Flush was successful
2022-12-07T16:45:56.147Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:92) Close UART: ttyAMA0
2022-12-07T16:45:56.148Z [MUXER0] Priority 240 is now active
2022-12-07T16:45:56.148Z [MUXER0] Set visible priority to 240
2022-12-07T16:45:56.148Z [HYPERHDR0] New priority[240], previous [255]
2022-12-07T16:45:56.148Z [HYPERHDR0] New source available -> switch LED-Device on
2022-12-07T16:45:56.148Z [SMOOTHING0] Clearing queued colors before: enabling
2022-12-07T16:45:56.148Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T16:45:56.149Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:100) Enable device
2022-12-07T16:45:56.149Z [LEDDEVICE_ADALIGHT] Opening UART: ttyAMA0
2022-12-07T16:45:56.149Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:138) _rs232Port.open(QIODevice::ReadWrite): ttyAMA0, Baud rate [921600]bps
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:143) portName: ttyAMA0
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:144) systemLocation: /dev/ttyAMA0
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:145) description:
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:146) manufacturer:
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:147) productIdentifier: 0x0
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:148) vendorIdentifier: 0x0
2022-12-07T16:45:56.194Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:149) serialNumber:
2022-12-07T16:45:56.195Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:308) Switch on
2022-12-07T16:45:56.195Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:384) Power On
2022-12-07T16:45:56.271Z [COMPONENTREG0] LED device: disabled
2022-12-07T16:45:56.380Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T16:45:56.381Z [COMPONENTREG0] LED device: enabled
2022-12-07T16:45:56.382Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T16:45:56.383Z [IMAGETOLED0] Total index number is: 40272 (memory: 40272). User sparse processing is: enabled, image size: 960 x 540, area number: 614
2022-12-07T16:45:56.409Z [WEBSOCKET] (WebSocketClient.cpp:201) send close: 1000
2022-12-07T16:45:56.657Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.212
2022-12-07T16:45:56.658Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.212' switch to HyperHDR instance 0
2022-12-07T16:45:57.402Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 0 frames already dropped
2022-12-07T16:45:58.403Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 1 frames already dropped
2022-12-07T16:45:59.405Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 2 frames already dropped
2022-12-07T16:46:00.406Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 3 frames already dropped
2022-12-07T16:46:01.407Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 4 frames already dropped
2022-12-07T16:46:02.408Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 5 frames already dropped
2022-12-07T16:46:02.409Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:90) Flush was successful
2022-12-07T16:46:02.409Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:92) Close UART: ttyAMA0
2022-12-07T16:46:02.409Z [LEDDEVICE_ADALIGHT] Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
2022-12-07T16:46:02.409Z [COMPONENTREG0] LED device: disabled
2022-12-07T16:46:06.496Z [JSONSERVER] (JsonServer.cpp:88) New connection from: ::ffff:192.168.1.131
2022-12-07T16:46:06.496Z [JSONCLIENTCONNECTION] (JsonAPI.cpp:97) Client '::ffff:192.168.1.199' switch to HyperHDR instance 0
2022-12-07T16:46:06.496Z [JSONSERVER] (JsonServer.cpp:88) New connection from: ::ffff:192.168.1.131
2022-12-07T16:46:06.497Z [JSONCLIENTCONNECTION] (JsonAPI.cpp:97) Client '::ffff:192.168.1.199' switch to HyperHDR instance 0
2022-12-07T16:46:07.390Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":287}]
2022-12-07T16:46:07.435Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:288) Serial devices discovered: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T16:46:07.435Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T16:46:23.702Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:63) Stop device
2022-12-07T16:46:23.703Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:134) Disable device
2022-12-07T16:46:23.703Z [LEDDEVICE_ADALIGHT] Stopped LedDevice 'adalight'
2022-12-07T16:46:23.704Z [LEDDEVICE_ADALIGHT] Start LedDevice 'adalight'.
2022-12-07T16:46:23.704Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:162) deviceConfig: [{"awa_mode":true,"colorOrder":"grb","currentLedCount":614,"hardwareLedCount":null,"output":"ttyAMA0","rate":921600,"refreshTime":0,"type":"adalight","white_channel_calibration":false}]
2022-12-07T16:46:23.704Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:226) RefreshTime updated to 0ms
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:36) DeviceType : adalight
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:37) LedCount : 614
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:38) RefreshTime : 0
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:50) deviceName : ttyAMA0
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:51) AutoDevice : 0
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:52) baudRate_Hz : 921600
2022-12-07T16:46:23.705Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:53) delayAfCon ms: 0
2022-12-07T16:46:23.706Z [LEDDEVICE_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol
2022-12-07T16:46:23.706Z [LEDDEVICE_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 614 leds: Awa 0x02 0x65 0x32
2022-12-07T16:46:23.706Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:100) Enable device
2022-12-07T16:46:23.706Z [LEDDEVICE_ADALIGHT] Opening UART: ttyAMA0
2022-12-07T16:46:23.706Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:138) _rs232Port.open(QIODevice::ReadWrite): ttyAMA0, Baud rate [921600]bps
2022-12-07T16:46:23.751Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:143) portName: ttyAMA0
2022-12-07T16:46:23.751Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:144) systemLocation: /dev/ttyAMA0
2022-12-07T16:46:23.751Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:145) description:
2022-12-07T16:46:23.751Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:146) manufacturer:
2022-12-07T16:46:23.751Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:147) productIdentifier: 0x0
2022-12-07T16:46:23.752Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:148) vendorIdentifier: 0x0
2022-12-07T16:46:23.752Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:149) serialNumber:
2022-12-07T16:46:23.752Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:308) Switch on
2022-12-07T16:46:23.753Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:384) Power On
2022-12-07T16:46:23.753Z [COMPONENTREG0] LED device: enabled
2022-12-07T16:46:24.761Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 0 frames already dropped
2022-12-07T16:46:25.764Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 1 frames already dropped
2022-12-07T16:46:26.765Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 2 frames already dropped
2022-12-07T16:46:27.766Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 3 frames already dropped
2022-12-07T16:46:28.767Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 4 frames already dropped
2022-12-07T16:46:29.768Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:215) Timeout after 1000ms: 5 frames already dropped
2022-12-07T16:46:29.768Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:90) Flush was successful
2022-12-07T16:46:29.769Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:92) Close UART: ttyAMA0
2022-12-07T16:46:29.769Z [LEDDEVICE_ADALIGHT] Device disabled, device 'adalight' signals error: 'Timeout writing data to ttyAMA0'
2022-12-07T16:46:29.769Z [COMPONENTREG0] LED device: disabled
2022-12-07T16:47:42.114Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 8, hits: 6348, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:47:42.121Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T16:48:42.111Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 7, hits: 3596, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:48:42.117Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:49:42.123Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 7, hits: 3597, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:49:42.129Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T16:50:42.115Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 6, hits: 3596, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:50:42.122Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:51:42.111Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 6, hits: 3596, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:51:42.118Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:52:42.119Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:52:42.120Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 5, hits: 3597, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:53:42.116Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 5, hits: 3596, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:53:42.123Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T16:54:42.128Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:54:42.128Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 4, hits: 3597, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:55:42.120Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:55:42.120Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 4, hits: 3596, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:56:42.117Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 3, hits: 3596, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:56:42.123Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T16:57:42.125Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:57:42.126Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 3, hits: 3597, needed: 0, cleanup: 0, limit: 8
2022-12-07T16:58:42.121Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T16:58:42.122Z [V4L2:USB3.0 HD VIDE] Video cache: enabled, size: 2, hits: 3596, needed: 0, cleanup: 1, limit: 8
2022-12-07T16:59:42.120Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T17:00:42.125Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:01:42.128Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T17:02:42.120Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:03:42.116Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:04:42.124Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T17:05:42.120Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:06:42.122Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:07:42.125Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T17:08:42.117Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 5ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:09:42.123Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:10:42.127Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597]
2022-12-07T17:11:42.119Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:12:42.124Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596]
2022-12-07T17:13:04.919Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":123}]
2022-12-07T17:13:04.964Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:288) Serial devices discovered: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB Serial (/dev/ttyUSB0)","value":"ttyUSB0"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T17:13:04.965Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB Serial (/dev/ttyUSB0)","value":"ttyUSB0"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T17:13:10.168Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:63) Stop device
2022-12-07T17:13:10.168Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:134) Disable device
2022-12-07T17:13:10.168Z [LEDDEVICE_ADALIGHT] Stopped LedDevice 'adalight'
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] Start LedDevice 'adalight'.
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:162) deviceConfig: [{"awa_mode":true,"colorOrder":"grb","currentLedCount":614,"hardwareLedCount":null,"output":"ttyUSB0","rate":921600,"refreshTime":0,"type":"adalight","white_channel_calibration":false}]
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:226) RefreshTime updated to 0ms
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:36) DeviceType : adalight
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:37) LedCount : 614
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:38) RefreshTime : 0
2022-12-07T17:13:10.169Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:50) deviceName : ttyUSB0
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:51) AutoDevice : 0
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:52) baudRate_Hz : 921600
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:53) delayAfCon ms: 0
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (LedDeviceAdalight.cpp:79) Adalight driver with activated high speeed & data integration check AWA protocol
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (LedDeviceAdalight.cpp:88) Adalight header for 614 leds: Awa 0x02 0x65 0x32
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:100) Enable device
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] Opening UART: ttyUSB0
2022-12-07T17:13:10.170Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:138) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [921600]bps
2022-12-07T17:13:10.218Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:143) portName: ttyUSB0
2022-12-07T17:13:10.219Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:144) systemLocation: /dev/ttyUSB0
2022-12-07T17:13:10.219Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:145) description: USB Serial
2022-12-07T17:13:10.219Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:146) manufacturer: 1a86
2022-12-07T17:13:10.220Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:147) productIdentifier: 0x7523
2022-12-07T17:13:10.220Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:148) vendorIdentifier: 0x1a86
2022-12-07T17:13:10.220Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:149) serialNumber:
2022-12-07T17:13:10.227Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:308) Switch on
2022-12-07T17:13:10.228Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:384) Power On
2022-12-07T17:13:10.228Z [COMPONENTREG0] LED device: enabled
2022-12-07T17:14:42.130Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.93, processed = 3596], [LED0: FPS = 45.46, send = 2728, processed = 2728]
2022-12-07T17:15:42.126Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 45.45, send = 2727, processed = 2727]
2022-12-07T17:16:42.117Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3596], [LED0: FPS = 45.46, send = 2727, processed = 2727]
2022-12-07T17:17:42.121Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 45.45, send = 2727, processed = 2727]
2022-12-07T17:17:59.529Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T17:17:59.531Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T17:18:16.800Z [WEBSOCKET] (JsonAPI.cpp:1630) message: [{"command":"leddevice","ledDeviceType":"adalight","subcommand":"discover","tan":521}]
2022-12-07T17:18:16.845Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:288) Serial devices discovered: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB Serial (/dev/ttyUSB0)","value":"ttyUSB0"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T17:18:16.846Z [WEBSOCKET] (JsonAPI.cpp:1654) response: [{"devices":[{"name":"Auto","value":"auto"},{"name":"USB Serial (/dev/ttyUSB0)","value":"ttyUSB0"},{"name":" (/dev/ttyAMA0)","value":"ttyAMA0"}],"ledDeviceType":"adalight"}]
2022-12-07T17:18:34.069Z [WEBSOCKET] (JsonAPI.cpp:1250) log streaming activated for client ::ffff:192.168.1.231
2022-12-07T17:18:42.121Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 59.96, processed = 3597], [LED0: FPS = 45.45, send = 2727, processed = 2727]
2022-12-07T17:19:10.742Z [COMPONENTREG0] (ComponentRegister.cpp:57) Disable Hyperhdr, store current component states
2022-12-07T17:19:10.743Z [COMPONENTREG0] HyperHDR: disabled
2022-12-07T17:19:10.743Z [SMOOTHING0] Clearing queued colors before: disabling
2022-12-07T17:19:10.743Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:10.744Z [COMPONENTREG0] Smoothing: disabled
2022-12-07T17:19:10.744Z [MUXER0] Removed source priority 240
2022-12-07T17:19:10.744Z [MUXER0] Set visible priority to 255
2022-12-07T17:19:10.744Z [HYPERHDR0] New priority[255], previous [240]
2022-12-07T17:19:10.745Z [HYPERHDR0] No source left -> switch LED-Device off
2022-12-07T17:19:10.745Z [SMOOTHING0] Clearing queued colors before: disabling
2022-12-07T17:19:10.745Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:10.750Z [WEBSOCKET] (JsonAPI.cpp:1259) log streaming deactivated for client ::ffff:192.168.1.231
2022-12-07T17:19:15.731Z [COMPONENTREG0] (ComponentRegister.cpp:74) Enable Hyperhdr, recover previous component states
2022-12-07T17:19:15.732Z [COMPONENTREG0] HyperHDR: enabled
2022-12-07T17:19:46.814Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:134) Disable device
2022-12-07T17:19:46.815Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:334) Switch off
2022-12-07T17:19:46.815Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:292) Set LED strip to black/power off
2022-12-07T17:19:46.880Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:90) Flush was successful
2022-12-07T17:19:46.880Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:92) Close UART: ttyUSB0
2022-12-07T17:19:48.882Z [COMPONENTREG0] Video capture device: disabled
2022-12-07T17:19:48.887Z [V4L2:USB3.0 HD VIDE] Stopped
2022-12-07T17:19:48.883Z [SMOOTHING0] Clearing queued colors before: disabling
2022-12-07T17:19:48.883Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:48.888Z [V4L2:USB3.0 HD VIDE] Frame index = 122563, inactive or critical VIDIOC_QBUF error in v4l2 driver. Buf index = 3, worker = 0, is_active = 0.
2022-12-07T17:19:48.883Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:134) Disable device
2022-12-07T17:19:48.884Z [SMOOTHING0] Clearing queued colors before: enabling
2022-12-07T17:19:48.884Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:48.884Z [COMPONENTREG0] Smoothing: enabled
2022-12-07T17:19:48.884Z [MUXER0] Register new input 'System/VIDEOGRABBER' with priority 240 as inactive
2022-12-07T17:19:48.884Z [COMPONENTREG0] Video capture device: enabled
2022-12-07T17:19:48.889Z [V4L2:USB3.0 HD VIDE] Multithreading for V4L2 is enabled. Available thread's count 4
2022-12-07T17:19:48.889Z [V4L2:USB3.0 HD VIDE] Found capture device: /dev/video15
2022-12-07T17:19:48.890Z [V4L2:USB3.0 HD VIDE] Found capture device: /dev/video21
2022-12-07T17:19:48.891Z [V4L2:USB3.0 HD VIDE] Found capture device: /dev/video14
2022-12-07T17:19:48.892Z [V4L2:USB3.0 HD VIDE] Found capture device: /dev/video22
2022-12-07T17:19:48.893Z [V4L2:USB3.0 HD VIDE] Found capture device: /dev/video0
2022-12-07T17:19:48.893Z [V4L2:USB3.0 HD VIDE] (V4L2Grabber.cpp:212) Searching for USB3.0 HD Video Capture: USB3.0 (video0) 960 x 540 @ 30 fps, input: -1 (mjpeg)
2022-12-07T17:19:48.894Z [V4L2:USB3.0 HD VIDE] *************************************************************************************************
2022-12-07T17:19:48.894Z [V4L2:USB3.0 HD VIDE] Starting V4L2 grabber. Selected: USB3.0 HD Video Capture: USB3.0 (video0) [/dev/video0] 960 x 540 @ 30 fps mjpeg
2022-12-07T17:19:48.894Z [V4L2:USB3.0 HD VIDE] *************************************************************************************************
2022-12-07T17:19:48.895Z [V4L2:USB3.0 HD VIDE] (V4L2Grabber.cpp:807) Hardware cropping is not supported: ignoring
2022-12-07T17:19:48.895Z [V4L2:USB3.0 HD VIDE] Set device input to: Camera 1
2022-12-07T17:19:48.897Z [V4L2:USB3.0 HD VIDE] Set resolution to: 960 x 540
2022-12-07T17:19:48.899Z [V4L2:USB3.0 HD VIDE] Set framerate to 30 FPS
2022-12-07T17:19:48.900Z [V4L2:USB3.0 HD VIDE] (V4L2Grabber.cpp:105) LUT folder location: '/usr/share/hyperhdr/lut'
2022-12-07T17:19:48.900Z [V4L2:USB3.0 HD VIDE] LUT file is not found here: /home/pbnj4640/.hyperhdr/lut_lin_tables.3d
2022-12-07T17:19:48.901Z [V4L2:USB3.0 HD VIDE] (Grabber.cpp:445) LUT file found: /usr/share/hyperhdr/lut/lut_lin_tables.3d
2022-12-07T17:19:48.901Z [V4L2:USB3.0 HD VIDE] (Grabber.cpp:455) Index 1 for HDR YUV
2022-12-07T17:19:48.944Z [V4L2:USB3.0 HD VIDE] Found and loaded LUT: '/usr/share/hyperhdr/lut/lut_lin_tables.3d'
2022-12-07T17:19:48.945Z [V4L2:USB3.0 HD VIDE] Video pixel format is set to: MJPEG
2022-12-07T17:19:48.950Z [V4L2:USB3.0 HD VIDE] Started
2022-12-07T17:19:48.884Z [SMOOTHING0] Clearing queued colors before: enabling
2022-12-07T17:19:48.884Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:48.885Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:100) Enable device
2022-12-07T17:19:48.885Z [LEDDEVICE_ADALIGHT] Opening UART: ttyUSB0
2022-12-07T17:19:48.885Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:138) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [921600]bps
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:143) portName: ttyUSB0
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:144) systemLocation: /dev/ttyUSB0
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:145) description: USB Serial
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:146) manufacturer: 1a86
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:147) productIdentifier: 0x7523
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:148) vendorIdentifier: 0x1a86
2022-12-07T17:19:48.948Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:149) serialNumber:
2022-12-07T17:19:48.955Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:308) Switch on
2022-12-07T17:19:48.955Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:384) Power On
2022-12-07T17:19:48.955Z [COMPONENTREG0] LED device: disabled
2022-12-07T17:19:48.956Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T17:19:48.957Z [MUXER0] Priority 240 is now active
2022-12-07T17:19:48.957Z [MUXER0] Set visible priority to 240
2022-12-07T17:19:48.957Z [HYPERHDR0] New priority[240], previous [255]
2022-12-07T17:19:48.957Z [HYPERHDR0] New source available -> switch LED-Device on
2022-12-07T17:19:48.957Z [SMOOTHING0] Clearing queued colors before: enabling
2022-12-07T17:19:48.957Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:19:48.957Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:100) Enable device
2022-12-07T17:19:48.958Z [COMPONENTREG0] LED device: enabled
2022-12-07T17:19:48.958Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T17:19:48.978Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T17:20:04.228Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::ffff:192.168.1.231
2022-12-07T17:20:04.228Z [WEBSOCKET] (JsonAPI.cpp:97) Client '::ffff:192.168.1.231' switch to HyperHDR instance 0
2022-12-07T17:20:25.772Z [EFFECTENGINE0] Run effect "Rainbow swirl fast" on channel 254
2022-12-07T17:20:25.772Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Rainbow swirl fast], smoothCfg [2]
2022-12-07T17:20:25.772Z [MUXER0] Register new input 'System/EFFECT' with priority 254 as inactive
2022-12-07T17:20:25.773Z [HYPERHDR] Initial background effect 'Rainbow swirl fast' started
2022-12-07T17:20:25.789Z [EFFECT0(Rainbo...)] Begin playing the effect with priority: 254
2022-12-07T17:20:31.968Z [MUXER0] Removed source priority 254
2022-12-07T17:20:32.292Z [EFFECT0(Rainbo...)] The effect quits with priority: 254
2022-12-07T17:20:32.293Z [EFFECTENGINE0] Effect 'Rainbow swirl fast' has finished.
2022-12-07T17:20:32.294Z [EFFECT0(Rainbo...)] Deleting effect named: 'Rainbow swirl fast'
2022-12-07T17:20:32.295Z [EFFECT0(Rainbo...)] Effect named: 'Rainbow swirl fast' is deleted
2022-12-07T17:20:44.198Z [EFFECTENGINE0] Run effect "Breath" on channel 1
2022-12-07T17:20:44.199Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Breath], smoothCfg [2]
2022-12-07T17:20:44.199Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.231/EFFECT' with priority 1 as inactive
2022-12-07T17:20:44.200Z [EFFECT0(Breath)] Begin playing the effect with priority: 1
2022-12-07T17:20:44.201Z [MUXER0] (PriorityMuxer.cpp:219) Priority 1 is now active
2022-12-07T17:20:44.201Z [MUXER0] Set visible priority to 1
2022-12-07T17:20:44.201Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:20:44.201Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:20:44.201Z [SMOOTHING0] Selecting config (2) => type: Linear, dirMode: false, pause: false, settlingTime: 200ms, interval: 40ms (25Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-12-07T17:20:44.201Z [SMOOTHING0] Using linear smoothing input (2)
2022-12-07T17:20:44.201Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T17:20:44.242Z [SMOOTHING0] Using linear smoothing procedure (2)
2022-12-07T17:20:45.736Z [MUXER0] Removed source priority 1
2022-12-07T17:20:45.738Z [MUXER0] Set visible priority to 240
2022-12-07T17:20:45.739Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:20:45.739Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:20:45.739Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 2, antiFlickTime: 0
2022-12-07T17:20:45.740Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T17:20:45.740Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T17:20:45.748Z [EFFECT0(Breath)] The effect quits with priority: 1
2022-12-07T17:20:45.748Z [EFFECTENGINE0] Effect 'Breath' has finished.
2022-12-07T17:20:45.749Z [EFFECT0(Breath)] Deleting effect named: 'Breath'
2022-12-07T17:20:45.749Z [EFFECT0(Breath)] Effect named: 'Breath' is deleted
2022-12-07T17:20:45.759Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T17:20:54.964Z [EFFECTENGINE0] Run effect "Candle" on channel 1
2022-12-07T17:20:54.966Z [EFFECTENGINE0] (EffectEngine.cpp:174) Start the effect: name [Candle], smoothCfg [31]
2022-12-07T17:20:54.966Z [MUXER0] Register new input 'Web Configuration@::ffff:192.168.1.231/EFFECT' with priority 1 as inactive
2022-12-07T17:20:54.966Z [EFFECT0(Candle)] Begin playing the effect with priority: 1
2022-12-07T17:20:54.967Z [MUXER0] (PriorityMuxer.cpp:219) Priority 1 is now active
2022-12-07T17:20:54.968Z [MUXER0] Set visible priority to 1
2022-12-07T17:20:54.968Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:20:54.968Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:20:54.968Z [SMOOTHING0] Selecting config (31) => type: Linear, dirMode: false, pause: false, settlingTime: 500ms, interval: 50ms (20Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-12-07T17:20:54.969Z [SMOOTHING0] Using linear smoothing input (31)
2022-12-07T17:20:54.969Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T17:20:55.019Z [SMOOTHING0] Using linear smoothing procedure (31)
2022-12-07T17:21:03.184Z [MUXER0] (PriorityMuxer.cpp:77) Source auto select is now disabled
2022-12-07T17:21:03.184Z [MUXER0] Set visible priority to 240
2022-12-07T17:21:03.184Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:21:03.184Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:21:03.185Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 2, antiFlickTime: 0
2022-12-07T17:21:03.185Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T17:21:03.185Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T17:21:03.205Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T17:21:04.886Z [MUXER0] Set visible priority to 1
2022-12-07T17:21:04.886Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:21:04.886Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:21:04.886Z [SMOOTHING0] Selecting config (31) => type: Linear, dirMode: false, pause: false, settlingTime: 500ms, interval: 50ms (20Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-12-07T17:21:04.886Z [SMOOTHING0] Using linear smoothing input (31)
2022-12-07T17:21:04.886Z [HYPERHDR0] New priority[1], previous [240]
2022-12-07T17:21:04.936Z [SMOOTHING0] Using linear smoothing procedure (31)
2022-12-07T17:21:08.030Z [MUXER0] Removed source priority 1
2022-12-07T17:21:08.032Z [MUXER0] (PriorityMuxer.cpp:357) The manual selected priority '1' is no longer available, switching to auto selection
2022-12-07T17:21:08.032Z [MUXER0] (PriorityMuxer.cpp:77) Source auto select is now enabled
2022-12-07T17:21:08.032Z [MUXER0] Set visible priority to 240
2022-12-07T17:21:08.033Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-12-07T17:21:08.033Z [SMOOTHING0] Smoothing queue is cleared
2022-12-07T17:21:08.034Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 2, antiFlickTime: 0
2022-12-07T17:21:08.034Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T17:21:08.034Z [HYPERHDR0] New priority[240], previous [1]
2022-12-07T17:21:08.054Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-12-07T17:21:08.197Z [EFFECT0(Candle)] The effect quits with priority: 1
2022-12-07T17:21:08.197Z [EFFECTENGINE0] Effect 'Candle' has finished.
2022-12-07T17:21:08.198Z [EFFECT0(Candle)] Deleting effect named: 'Candle'
2022-12-07T17:21:08.198Z [EFFECT0(Candle)] Effect named: 'Candle' is deleted
2022-12-07T17:21:41.373Z [WEBSOCKET] (JsonAPI.cpp:1250) log streaming activated for client ::ffff:192.168.1.212
2022-12-07T17:21:42.129Z [PERFORMANCE] [USB capturing: FPS = 59.94, decoding = 7ms, frames = 3597, invalid = 0], [INSTANCE0: FPS = 48.99, processed = 2939], [LED0: FPS = 45.08, send = 2705, processed = 2705]
2022-12-07T17:22:42.123Z [PERFORM

ANCE] [USB capturing: FPS = 59.94, decoding = 6ms, frames = 3596, invalid = 0], [INSTANCE0: FPS = 59.94, processed = 3597], [LED0: FPS = 45.46, send = 2727, processed = 2727]

awawa-dev · 2022-12-07T17:32:39Z

awawa-dev
Dec 7, 2022
Maintainer

May I ask you to install v19beta2 from artifacts here https://github.com/awawa-dev/HyperHDR/actions/runs/3603333769 ?
It's not released yet but it makes the process a lot easier to debug (just backup your settings from HyperHDR panel -> General tab -> export just in case).
Then you'll get a new option 'esp8266/esp32 handshake' described here:
#432

0 replies

awawa-dev · 2022-12-07T17:35:46Z

awawa-dev
Dec 7, 2022
Maintainer

Or connect your board to Windows for a moment and use Putty:
awawa-dev/HyperSerialEsp8266#20 (comment)

3 replies

pbnj4640 Dec 7, 2022
Author

You're def onto something.

2022-12-07T21:51:27.310Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:102) Enable device
2022-12-07T21:51:27.310Z [LEDDEVICE_ADALIGHT] Opening UART: ttyUSB0
2022-12-07T21:51:27.311Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:174) _rs232Port.open(QIODevice::ReadWrite): ttyUSB0, Baud rate [921600]bps
2022-12-07T21:51:27.393Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:179) portName: ttyUSB0
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:180) systemLocation: /dev/ttyUSB0
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:181) description: USB Serial
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:182) manufacturer: 1a86
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:183) productIdentifier: 0x7523
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:184) vendorIdentifier: 0x1a86
2022-12-07T21:51:27.394Z [LEDDEVICE_ADALIGHT] (ProviderRs232.cpp:185) serialNumber:
2022-12-07T21:51:27.656Z [LEDDEVICE_ADALIGHT] Could not detect HyperSerialEsp8266/HyperSerialESP32 device
2022-12-07T21:51:27.656Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:329) Switch on
2022-12-07T21:51:27.656Z [LEDDEVICE_ADALIGHT] (LedDevice.cpp:405) Power On
2022-12-07T21:51:27.657Z [COMPONENTREG0] LED device: enabled
2022-12-07T21:51:27.661Z [SMOOTHING0] Using alternative smoothing input (0)
2022-12-07T21:51:27.662Z [SMOOTHING0] Using alternative smoothing procedure (0)

Windows seems to recognize it though?

awawa-dev Dec 7, 2022
Maintainer

On windows did you tested it using 921600 speed? Maybe HyperHDR could not reset the esp board on Linux so could not receive the boot message ... it's not conclusive but it doesn't help.

On Linux: when you have 'handshake' option enabled, play some effect for few seconds and then disable the led strip. Next read the statistics from the log (as it's shown at the bottom: #432 ). There is also an option to connect to esp8266 using screen command on Linux (similar to Putty, install it first using apt-get) : screen /dev/ttyUSB0 921600 Press Ctrl-a then k to exit screen later.

awawa-dev Dec 7, 2022
Maintainer

before using screen please stop HyperHDR

awawa-dev · 2022-12-07T17:39:58Z

awawa-dev
Dec 7, 2022
Maintainer

BTW output for HyperSerialEsp8266 is GPIO2

0 replies

pbnj4640 · 2022-12-07T22:34:09Z

pbnj4640
Dec 7, 2022
Author

It appears to be working now... Like any good software troubleshooting, i have no idea why it does work now, but it does! and it's persistent. I also got my ESP32's today, so i will start this whole project over again eventually.

0 replies

awawa-dev · 2022-12-07T23:06:05Z

awawa-dev
Dec 7, 2022
Maintainer

Great! BTW did you already mount your LED strip on the TV or just test it?

0 replies

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

HyperHDR/WLED - No lights #448

{{title}}

Replies: 7 comments 9 replies

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{title}}

Select a reply

HyperHDR/WLED - No lights #448

pbnj4640 Dec 7, 2022

Replies: 7 comments · 9 replies

awawa-dev Dec 7, 2022 Maintainer

pbnj4640 Dec 7, 2022 Author

awawa-dev Dec 7, 2022 Maintainer

pbnj4640 Dec 7, 2022 Author

awawa-dev Dec 7, 2022 Maintainer

awawa-dev Dec 7, 2022 Maintainer

awawa-dev Dec 7, 2022 Maintainer

pbnj4640 Dec 7, 2022 Author

awawa-dev Dec 7, 2022 Maintainer

awawa-dev Dec 7, 2022 Maintainer

pbnj4640 Dec 7, 2022 Author

awawa-dev Dec 7, 2022 Maintainer

awawa-dev Dec 7, 2022 Maintainer

awawa-dev Dec 7, 2022 Maintainer

pbnj4640 Dec 7, 2022 Author

awawa-dev Dec 7, 2022 Maintainer

pbnj4640
Dec 7, 2022

Replies: 7 comments 9 replies

awawa-dev
Dec 7, 2022
Maintainer

pbnj4640 Dec 7, 2022
Author

awawa-dev
Dec 7, 2022
Maintainer

pbnj4640 Dec 7, 2022
Author

awawa-dev Dec 7, 2022
Maintainer

awawa-dev Dec 7, 2022
Maintainer

awawa-dev Dec 7, 2022
Maintainer

pbnj4640 Dec 7, 2022
Author

awawa-dev
Dec 7, 2022
Maintainer

awawa-dev
Dec 7, 2022
Maintainer

pbnj4640 Dec 7, 2022
Author

awawa-dev Dec 7, 2022
Maintainer

awawa-dev Dec 7, 2022
Maintainer

awawa-dev
Dec 7, 2022
Maintainer

pbnj4640
Dec 7, 2022
Author

awawa-dev
Dec 7, 2022
Maintainer