Setup keeps cutting out #415
Replies: 2 comments 1 reply
-
It went off for about 5 seconds just now and the log says 2022-11-11T18:39:01.122Z [V4L2:AUTO] Video cache: enabled, size: 3, hits: 410, needed: 1, cleanup: 0, limit: 8 |
Beta Was this translation helpful? Give feedback.
-
2022-11-11T18:40:37.579Z [MAIN] Database path: '/root/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled |
Beta Was this translation helpful? Give feedback.
-
Hi all.
I built my HyperHDR system last year following EverythingsSmarthome's tutorial on youtube. I've had it working fine for that time apart from a few times when it has cut out which I think might be due to my dodgy wiring. It is currently doing this several times a day and the log says
2022-11-11T16:39:14.400Z [PERFORMANCE] Under-voltage detected. The system is not stable. Please fix it!
My setup is a Raspberry Pi 3B+, 2 lots of the WS281 LED strips, a 5V power supply and a Zasluke Capture card. All of this is powered from the one power supply by cutting off the wires from the ends of the LED strips, wiring them into a block connector and also using a small wire from the power supply to the GPIO 18 pin (i think) on the PI.
I have read that having it all powered from one power supply via the PI can be temperamental and wondered if anyone could point me in the direction of setting it up differently?
Beta Was this translation helpful? Give feedback.
All reactions