mac_install

#! /usr/bin/env bash
# Copyright 2017 Adam Green (http://mbed.org/users/AdamGreen/)
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.


# Logs the command to be run and then executes the command while logging the results.
RunAndLog () {
    echo `date` Executing $@>>$LOGFILE
    $@ 1>>$LOGFILE 2>$ERRORFILE
    if [ "$?" != "0" ] ; then
        cat $ERRORFILE >>$LOGFILE
        echo `date` Failure forced early exit>>$LOGFILE
        cat $LOGFILE
        rm -f $ERRORFILE
        popd >/dev/null
        read -n 1 -sp "Press any key to continue..." dummy ; echo
        exit 1
    fi
}


# Setup script variables.
ROOTDIR=$0
ROOTDIR=${ROOTDIR%/*}
pushd $ROOTDIR
ROOTDIR=$PWD
LOGFILE="$ROOTDIR"/mac_install.log
ERRORFILE="$ROOTDIR"/mac_install.err
GCC4ARM_VERSION=gcc-arm-none-eabi-6-2017-q2
GCC4ARM_FILENAME=gcc-arm-none-eabi-6-2017-q2-update-mac.tar.bz2
GCC4ARM_URL=https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/6-2017q2/$GCC4ARM_FILENAME
GCC4ARM_TAR="$ROOTDIR"/$GCC4ARM_FILENAME
GCC4ARM_MD5=d536d7fb167c04b24f7f0d40cd739cac
GCC4ARM_EXTRACT="$ROOTDIR"/$GCC4ARM_VERSION
GCC4ARM_DIR="$ROOTDIR"/gcc-arm-none-eabi
GCC4ARM_BINDIR=$GCC4ARM_DIR/bin
MACBIN_DIR=$ROOTDIR/build/osx64
OUR_MAKE=$ROOTDIR/build/osx64/make
BUILDSHELL_CMD=$ROOTDIR/BuildShell
BUILDSHELL_DEBUG_CMD=$ROOTDIR/BuildShellDebug
BUILDSHELL_DEVELOP_CMD=$ROOTDIR/BuildShellDevelop


echo Logging install results to $LOGFILE
echo `date` Starting $0 $*>$LOGFILE

echo Downloading GNU Tools for ARM Embedded Processors...
echo `date` Executing curl -L0 $GCC4ARM_URL>>$LOGFILE
curl -L0 $GCC4ARM_URL >$GCC4ARM_FILENAME

echo Validating md5 signature of GNU Tools for ARM Embedded Processors...
echo `date` Validating md5 signature of GNU Tools for ARM Embedded Processors>>$LOGFILE
archive_match=`md5 -q $GCC4ARM_FILENAME | grep -c $GCC4ARM_MD5`
if [ "$archive_match" != "1" ] ; then
    echo $GCC4ARM_FILENAME failed MD5 signature check.>>$LOGFILE
    echo `date` Failure forced early exit>>$LOGFILE
    cat $LOGFILE
    rm -f $ERRORFILE
    popd >/dev/null
    read -n 1 -sp "Press any key to continue..." dummy ; echo
    exit 1
fi

echo Extracting GNU Tools for ARM Embedded Processors...
rm -r $GCC4ARM_DIR >/dev/null 2>/dev/null
RunAndLog tar xf $GCC4ARM_TAR
RunAndLog mv $GCC4ARM_EXTRACT $GCC4ARM_DIR

echo Installing patched 64-bit Intel macOS GDB binaries...
RunAndLog cp $MACBIN_DIR/arm-none-eabi-gdb* $GCC4ARM_BINDIR/

echo Creating helper scripts...
echo "#! /usr/bin/env bash">$BUILDSHELL_CMD
echo "# Modify next line and set destination drive to match mbed device">>$BUILDSHELL_CMD
echo "export GCC4MBED_DEPLOY='cp PROJECT.bin /Volumes/MBED/ ; sync'">>$BUILDSHELL_CMD
echo>>$BUILDSHELL_CMD
echo "SCRIPT_PATH=\$0">>$BUILDSHELL_CMD
echo "SCRIPT_PATH=\${SCRIPT_PATH%/*}">>$BUILDSHELL_CMD
echo "cd \$SCRIPT_PATH">>$BUILDSHELL_CMD
echo "SCRIPT_PATH=\$PWD">>$BUILDSHELL_CMD
echo "export PATH=\$SCRIPT_PATH/build/osx64:\$SCRIPT_PATH/gcc-arm-none-eabi/bin:\$PATH">>$BUILDSHELL_CMD
echo "exec bash">>$BUILDSHELL_CMD
chmod +x $BUILDSHELL_CMD

echo "#! /usr/bin/env bash">$BUILDSHELL_DEBUG_CMD
echo "# Modify next line and set destination drive to match mbed device">>$BUILDSHELL_DEBUG_CMD
echo "export GCC4MBED_DEPLOY='cp PROJECT.bin /Volumes/MBED/'">>$BUILDSHELL_DEBUG_CMD
echo>>$BUILDSHELL_DEBUG_CMD
echo "SCRIPT_PATH=\$0">>$BUILDSHELL_DEBUG_CMD
echo "SCRIPT_PATH=\${SCRIPT_PATH%/*}">>$BUILDSHELL_DEBUG_CMD
echo "cd \$SCRIPT_PATH">>$BUILDSHELL_DEBUG_CMD
echo "SCRIPT_PATH=\$PWD">>$BUILDSHELL_DEBUG_CMD
echo "export PATH=\$SCRIPT_PATH/build/osx64:\$SCRIPT_PATH/gcc-arm-none-eabi/bin:\$PATH">>$BUILDSHELL_DEBUG_CMD
echo "export GCC4MBED_TYPE=Debug">>$BUILDSHELL_DEBUG_CMD
echo "exec bash">>$BUILDSHELL_DEBUG_CMD
chmod +x $BUILDSHELL_DEBUG_CMD

echo "#! /usr/bin/env bash">$BUILDSHELL_DEVELOP_CMD
echo "# Modify next line and set destination drive to match mbed device">>$BUILDSHELL_DEVELOP_CMD
echo "export GCC4MBED_DEPLOY='cp PROJECT.bin /Volumes/MBED/'">>$BUILDSHELL_DEVELOP_CMD
echo>>$BUILDSHELL_DEVELOP_CMD
echo "SCRIPT_PATH=\$0">>$BUILDSHELL_DEVELOP_CMD
echo "SCRIPT_PATH=\${SCRIPT_PATH%/*}">>$BUILDSHELL_DEVELOP_CMD
echo "cd \$SCRIPT_PATH">>$BUILDSHELL_DEVELOP_CMD
echo "SCRIPT_PATH=\$PWD">>$BUILDSHELL_DEVELOP_CMD
echo "export PATH=\$SCRIPT_PATH/build/osx64:\$SCRIPT_PATH/gcc-arm-none-eabi/bin:\$PATH">>$BUILDSHELL_DEVELOP_CMD
echo "export GCC4MBED_TYPE=Develop">>$BUILDSHELL_DEVELOP_CMD
echo "exec bash">>$BUILDSHELL_DEVELOP_CMD
chmod +x $BUILDSHELL_DEVELOP_CMD

# Place arm-none-eabi-* tools in the path before building gcc4mbed code.
PATH=$GCC4ARM_BINDIR:$PATH

echo Performing a clean build of the gcc4mbed samples...
RunAndLog $OUR_MAKE -C samples/ clean-all

echo Cleaning up intermediate files...
RunAndLog rm $GCC4ARM_TAR

echo
echo To build gcc4mbed samples, you will first need to run the following script
echo so that your environment variables are set correctly:
echo  $BUILDSHELL_CMD
echo You will want to run this each time you start a new Terminal.  You
echo can simply double-click on this script file from Finder to launch a
echo bash Terminal that has been properly initialized for building gcc4mbed
echo based code.  Feel free to customize it as you desire.
echo
echo You can also just edit your existing setup script such as \~/.profile
echo to update the PATH environment variable to include:
echo  $GCC4ARM_BINDIR


# Restore current directory and exit script on success.
echo `date` Finished successfully>>$LOGFILE
echo Finished successfully
rm -f $ERRORFILE
popd >/dev/null
read -n 1 -sp "Press any key to continue..." dummy ; echo