Skip to content

Latest commit

 

History

History
24 lines (13 loc) · 1.06 KB

README.md

File metadata and controls

24 lines (13 loc) · 1.06 KB
Raw

mouse-jiggler

This repo contains the CircuitPython code (and vendor libraries) required to program the Xiao SAMD21 board as a mouse jiggler.

The main program lives in code.py, while boot.py is ran as part of the bootloader.

Setting up a new Xiao

  1. Get CircuitPython bootloader in DFU form: https://circuitpython.org/board/seeeduino_xiao/

    Note: for some reason version 9.x is incompatible (wrong HID device). Probably not too hard to fix but for now use 8.2.4 (direct link)

  2. Enter DFU mode and install CircuitPython: https://wiki.seeedstudio.com/Seeeduino-XIAO-CircuitPython/

  3. Your computer should now see a CIRCUITPY external drive

  4. Copy the code from this repo into the CIRCUITPY "drive"

Enabling CIRCUITPY drive

  1. The code in boot.py disables the firmware storage device by default
  2. If you want to enable it again, you have to touch pin 0 with your finger within 10 seconds after connecting the device: