-
Notifications
You must be signed in to change notification settings - Fork 40
/
print_area_bed_mesh.cfg
166 lines (144 loc) · 7.7 KB
/
print_area_bed_mesh.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
[gcode_macro BED_MESH_CALIBRATE]
# print surface bed mesh calibrate
# Works with Klicky Probe on Voron
# November 24, 2021
# Steve Turgeon
rename_existing: _BED_MESH_CALIBRATE
variable_buffer: 20
; Do not change any of the existing values below.
variable_last_area_start_x: -1 ; Do not change
variable_last_area_start_y: -1 ; Do not change
variable_last_area_end_x: -1 ; Do not change
variable_last_area_end_y: -1 ; Do not change
gcode:
{% if params.FORCE_NEW_MESH != null %}
{ action_respond_info("Force New Mesh: %s" % (params.FORCE_NEW_MESH)) }
{% endif %}
{% if printer["bed_mesh"].profile_name == '' %}
{ action_respond_info("No existing bed mesh found.") }
{% set last_area_end_x=-1 %}
{% endif %}
{% if printer.toolhead.homed_axes != "xyz" %}
G28
{% endif %}
{% set klicky_available = printer['gcode_macro _Probe_Variables'] != null %}
{% set euclid_available = printer['gcode_macro EuclidProbe'] != null %}; Requires v5 macros https://github.com/nionio6915/Euclid_Probe/blob/main/Firmware_Examples/Klipper/00-euclid_exampleV5.cfg
{% if params.PRINT_MIN %}
{ action_respond_info("print_min: %s" % params.PRINT_MIN) }
{ action_respond_info("print_max: %s" % params.PRINT_MAX) }
{% set blTouchConfig = printer['configfile'].config["bltouch"] %}
{% if blTouchConfig %}
{% set OffsetX = blTouchConfig.x_offset|default(0)|float %}
{% set OffsetY = blTouchConfig.y_offset|default(0)|float %}
{% endif %}
{% set probeConfig = printer['configfile'].config["probe"] %}
{% if probeConfig %}
{% set OffsetX = probeConfig.x_offset|default(0)|float %}
{% set OffsetY = probeConfig.y_offset|default(0)|float %}
{% endif %}
{% set print_min_x = params.PRINT_MIN.split(",")[0]|float %}
{% set print_min_y = params.PRINT_MIN.split(",")[1]|float %}
{% set print_max_x = params.PRINT_MAX.split(",")[0]|float %}
{% set print_max_y = params.PRINT_MAX.split(",")[1]|float %}
{% if last_area_start_x > 0 %}
{ action_respond_info("last_bed_mesh: %s,%s %s,%s" % (last_area_start_x, last_area_start_y, last_area_end_x, last_area_end_y)) }
{% endif %}
{% if (params.FORCE_NEW_MESH != null) or (print_min_x < last_area_start_x) or (print_max_x > last_area_end_x) or (print_min_y < last_area_start_y) or (print_max_y > last_area_end_y) %}
{% if klicky_available %}
_CheckProbe action=query
Attach_Probe
{% elif euclid_available %}
DEPLOY_PROBE
{% endif %}
{% if (print_min_x < print_max_x) and (print_min_y < print_max_y) %}
# Get bed_mesh config (probe count, mesh_min and mesh_max for x and y
{% set bedMeshConfig = printer['configfile'].config["bed_mesh"] %}
{% set minimum_probe_count = 3 %}
{% if bedMeshConfig.algorithm == "bicubic" %}
{% set minimum_probe_count = 5 %}
{% endif %}
{% set probe_count = bedMeshConfig.probe_count.split(",") %}
{% set probe_count_x = probe_count[0]|int %}
{% if probe_count.__len__() > 1 %}
{% set probe_count_y = probe_count[1]|int %}
{% else %}
{% set probe_count_y = probe_count_x|int %}
{% endif %}
{% set relative_reference_index = bedMeshConfig.relative_reference_index %}
{% set mesh_min_x = bedMeshConfig.mesh_min.split(",")[0]|float %}
{% set mesh_min_y = bedMeshConfig.mesh_min.split(",")[1]|float %}
{% set mesh_max_x = bedMeshConfig.mesh_max.split(",")[0]|float %}
{% set mesh_max_y = bedMeshConfig.mesh_max.split(",")[1]|float %}
# If print area X is smaller than 50% of the bed size, change to to 3 probe counts for X instead of the default
{% if print_max_x - print_min_x < (mesh_max_x - mesh_min_x) * 0.50 %}
{% set probe_count_x = minimum_probe_count %}
{% endif %}
# If print area Y is smaller than 50% of the bed size, change to to 3 probe counts for Y instead of the default
{% if print_max_y - print_min_y < (mesh_max_y - mesh_min_y) * 0.50 %}
{% set probe_count_y = minimum_probe_count %}
{% endif %}
{% if print_min_x - buffer >= mesh_min_x %}
{% set mesh_min_x = print_min_x - buffer %}
{% endif %}
{% if print_min_y - buffer >= mesh_min_y %}
{% set mesh_min_y = print_min_y - buffer %}
{% endif %}
{% if print_max_x + buffer <= mesh_max_x %}
{% set mesh_max_x = print_max_x + buffer %}
{% endif %}
{% if print_max_y + buffer <= mesh_max_y %}
{% set mesh_max_y = print_max_y + buffer %}
{% endif %}
{ action_respond_info("mesh_min: %s,%s" % (mesh_min_x, mesh_min_y)) }
{ action_respond_info("mesh_max: %s,%s" % (mesh_max_x, mesh_max_y)) }
{ action_respond_info("probe_count: %s,%s" % (probe_count_x,probe_count_y)) }
; Set variables so they're available outside of macro
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=last_area_start_x VALUE={print_min_x}
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=last_area_start_y VALUE={print_min_y}
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=last_area_end_x VALUE={print_max_x}
SET_GCODE_VARIABLE MACRO=BED_MESH_CALIBRATE VARIABLE=last_area_end_y VALUE={print_max_y}
{% if printer["gcode_macro status_meshing"] != null %}
status_meshing
{% endif %}
{% if relative_reference_index == 0 or relative_reference_index == null %}
_BED_MESH_CALIBRATE mesh_min={mesh_min_x},{mesh_min_y} mesh_max={mesh_max_x},{mesh_max_y} probe_count={probe_count_x},{probe_count_y}
{% else %}
{% set relative_reference_index = ((probe_count_x * probe_count_y - 1) / 2)|int %}
{ action_respond_info("relative_reference_index: %s" % relative_reference_index) }
_BED_MESH_CALIBRATE mesh_min={mesh_min_x},{mesh_min_y} mesh_max={mesh_max_x},{mesh_max_y} probe_count={probe_count_x},{probe_count_y} relative_reference_index={relative_reference_index}
{% endif %}
{% else %}
{% if printer["gcode_macro status_meshing"] != null %}
status_meshing
{% endif %}
_BED_MESH_CALIBRATE
{% endif %}
{% if klicky_available %}
Dock_Probe
{% elif euclid_available %}
STOW_PROBE
{% endif %}
{% else %}
{ action_respond_info("No need to recreate Bed Mesh since it's same as current mesh or smaller") }
{% endif %}
{% else %}
{% if klicky_available %}
_CheckProbe action=query
Attach_Probe
{% elif euclid_available %}
STOW_PROBE
{% endif %}
{% if printer["gcode_macro status_meshing"] != null %}
status_meshing
{% endif %}
_BED_MESH_CALIBRATE
{% if klicky_available %}
Dock_Probe
{% endif %}
{% if euclid_available %}
STOW_PROBE
{% endif %}
{% endif %}
{% if printer["gcode_macro status_ready"] != null %}
status_ready
{% endif %}