gxbb_p200_k1_plus.dts

#include "gxbb_p200.dts"

/{
	le-dt-id = "gxbb_p200_k1_plus";
	ethmac: ethernet@0xc9410000 {
		compatible = "amlogic, gxbb-rmii-dwmac";
		phy-mode= "rmii";
		mc_val = <0x1800>;
	};

	/delete-node/ bt-dev;

	wifi {
		irq_trigger_type = "GPIO_IRQ_HIGH";
		/delete-property/ dhd_static_buf;
		power_on_pin2 = <&gpio	   GPIOX_20	   GPIO_ACTIVE_HIGH>;
	};

	sdio {
		interrupts = <	0 216 4>;
	};

	dwc2_a {
		port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
		/delete-property/ gpio-vbus-power;
		/delete-property/ gpios;
	};

	dvb {
		compatible = "amlogic,dvb";
		dev_name = "dvb";
		status = "okay";
		fec_reset_gpio-gpios = <&gpio GPIOY_13 GPIO_ACTIVE_HIGH>;
		power_ctrl_gpio-gpios = <&gpio GPIOY_11 GPIO_ACTIVE_LOW>;
		//"parallel","serial","disable"
		ts0 = "parallel";
		ts0_control = <0>;
		ts0_invert = <0>;
		pinctrl-names = "p_ts0", "s_ts0";
		pinctrl-0 = <&dvb_p_ts0_pins>;
		pinctrl-1 = <&dvb_s_ts0_pins>;
		resets = <&clock GCLK_IDX_DEMUX
				&clock GCLK_IDX_ASYNC_FIFO
				&clock GCLK_IDX_AHB_ARB0
				&clock GCLK_IDX_HIU_PARSER_TOP>;
		reset-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
	};

	dvbfe {
		compatible = "amlogic,dvbfe";
		//dev_name = "avl6211";
		status = "okay";
		dtv_demod0 = "Avl6211";
		dtv_demod0_i2c_adap_id = <1>;
		dtv_demod0_i2c_addr = <0xC0>;
		dtv_demod0_reset_value = <0>;
		//dtv_demod0_reset_gpio = <&gpio GPIOY_13 GPIO_ACTIVE_HIGH>;
		dtv_demod0_reset_gpio-gpios = <&gpio GPIOY_13 GPIO_ACTIVE_LOW>;
		dtv_demod0_power_gpio-gpios = <&gpio GPIOY_11 GPIO_ACTIVE_LOW>;
		fe0_dtv_demod = <0>;
		fe0_ts = <0>;
		fe0_dev = <0>;
	};
};

&i2c_a {
	status = "okay";
};

&i2c_b {
	status = "okay";
};

&i2c_c {
	status = "okay";
};

&i2c_d {
	status = "okay";
};
 
&i2c_slave {
	status = "disabled";
};