| Download 3D Files |
|---|
Note: These are suggestions, I designed the LT with these in mind but other settings might work aswell. The Design is based on an 0.4mm Nozzle
Note: We absolutely recommend using a technical material without any flexibility that can withstand high temperatures. Tested Filaments:
| Type | Brand | Name | Price | Link | Required Nozzle |
|---|---|---|---|---|---|
| PC Blend | Prusament | Carbon Fiber | 59.99€ | link | Hardened |
| GreenTEC | extrudr | Pro Carbon | 49.99€ | link | Hardened |
| ASA | Prusament | Prusament ASA | 29.99€ | link | --- |
Note: Some links might be affiliate links!
| Layer height | Infill | Supports | Perimeters | Horizontal shells |
|---|---|---|---|---|
| 0.2mm | 40% | On build plate only | 5 (min) | Top: 9, Bot: 8 |
| Part Name | Orientation | Supports | Prepared |
|---|---|---|---|
| BASECOVER_LEFT_V01 |  |
Supports on build plate only |  |
| BASECOVER_RIGHT_V01 |  |
Supports on build plate only |  |
| BASEPART_BACK_V01 |  |
No supports needed |  |
| BASEPART_FRONT_V01 |  |
No supports needed |  |
| BASEPART_LEFT_V01 |  |
Supports on build plate only |  |
| BASEPART_RIGHT_V01 |  |
Supports on build plate only |  |
| BEDHOLDER_CONNECTOR_V01 |  |
No supports needed |  |
| BED_HOLDER_MAIN_V01 |  |
Supports on build plate only |  |
| BELT-TENSIONER_Z_V01 |  |
No supports needed |  |
| BELT_CONNECTOR_V01_WIP |  |
--- |  |
| BELT_TENSIONER_XY_V01 |  |
No supports needed |  |
| BOTTOM_COVER_V01 |  |
--- |  |
| COVER_ROUND_V01 |  |
No supports needed |  |
| DISTANCE_LEFT_V01 |  |
No supports needed |  |
| DISTANCE_RIGHT_V01 |  |
No supports needed |  |
| ENDCAP_BED-EXTRUSION_V01 |  |
No supports needed |  |
| EXTRUDER_BASEPLATE_V01 |  |
--- |  |
| INTERCONNECT_V03_WIP |  |
--- |  |
| LEADSCREW_NUT_MOUNT_V01 |  |
No supports needed |  |
| LED_INDICATOR_MOUNT_V01 |  |
No supports needed |  |
| MOTORBRACKET_LEFT_V01 |  |
No supports needed |  |
| MOTORBRACKET_RIGHT_V01 |  |
No supports needed |  |
| PICO_MOUNT_PRE-SKETCH_V01 |  |
No supports needed |  |
| SCREEN_BASE_V01_WIP |  |
Supports on build plate only |  |
| SCREEN_LID_V01_WIP |  |
No supports needed |  |
| SCREWMOUNT_BOTTOM_V01 |  |
Supports on build plate only |  |
| SIDE_PANEL_LEFT_V01 |  |
No supports needed |  |
| SIDE_PANEL_RIGHT_V01 |  |
No supports needed |  |
| X-RAIL_ENDCAP_V01 |  |
No supports needed |  |
| XY-SPACER_V01 |  |
No supports needed |  |
| Z-AXIS-ENDSTOP_V01 |  |
Supports on build plate only |  |
| Z-BLOCK_HOLDER_V01 |  |
No supports needed |  |