Use POSIX path for CMake install prefix preload #293
wheel.yml
on: push
Matrix: build
Matrix: build-macos
Matrix: build-windows
Matrix: cibw
Matrix: test
Matrix: test-macos
Matrix: test-windows
Matrix: check-release
release
0s
Annotations
5 errors, 37 warnings, and 166 notices
cibw (ubuntu-20.04)
The job was canceled because "windows-2019" failed.
|
cibw (windows-2019):
src\py_build_cmake\common\__init__.py#L219
py_build_cmake.common:Uncaught exception:
|
cibw (windows-2019)
Command ['python', '-m', 'pip', 'wheel', 'D:\\a\\py-build-cmake\\py-build-cmake\\examples\\pybind11-project', '--wheel-dir=C:\\Users\\runneradmin\\AppData\\Local\\Temp\\cibw-run-kzx7ovdy\\cp311-win_arm64\\built_wheel', '--no-deps', '-v'] failed with code 1. None
|
cibw (windows-2019)
Process completed with exit code 1.
|
cibw (macos-11)
The job was canceled because "windows-2019" failed.
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
cibw (windows-2019):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
cibw (windows-2019):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
cibw (windows-2019):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
cibw (windows-2019):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
cibw (windows-2019)
Setting DIST_EXTRA_CONFIG=C:\Users\runneradmin\AppData\Local\Temp\cibw-run-kzx7ovdy\cp311-win_arm64\build\extra-setup.cfg for cross-compilation
|
cibw (windows-2019)
Setting SETUPTOOLS_EXT_SUFFIX=.cp311-win_arm64.pyd for cross-compilation
|
cibw (windows-2019)
Setting SETUPTOOLS_USE_DISTUTILS=local as it is required for cross-compilation
|
cibw (windows-2019)
Setting CARGO_BUILD_TARGET=aarch64-pc-windows-msvc for cross-compilation
|
cibw (windows-2019):
src\py_build_cmake\config\quirks.py#L60
py_build_cmake.config.quirks:DIST_EXTRA_CONFIG.build_ext specified plat_name that is different from the current platform. Automatically enabling cross-compilation for ARM64
|
cibw (windows-2019):
src\py_build_cmake\config\quirks.py#L60
py_build_cmake.config.quirks:DIST_EXTRA_CONFIG.build_ext specified plat_name that is different from the current platform. Automatically enabling cross-compilation for ARM64
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.11):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.11):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.12):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.12):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.10):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.10):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.10):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.10):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.7):
src\py_build_cmake\build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.7):
src\py_build_cmake\build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.7):
src\py_build_cmake\build.py#L502
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.7):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.7):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.7):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.7):
src\py_build_cmake\build.py#L502
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.9):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.9):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.9):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.9):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.11):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.11):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.11):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.11):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.8):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.8):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.8):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.8):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project\_add_module_d.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal\_add_module.pyi because a .pyi file for the same module already exists
|
test-windows (3.12):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.12):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.12):
src\py_build_cmake\config\load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-windows (3.12):
src\py_build_cmake\build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp\_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.8):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.8):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.9):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.9):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.7):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.7):
src/py_build_cmake/build.py#L502
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file pybind11_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file nanobind_project/_add_module_d.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal/_add_module.pyi because a .pyi file for the same module already exists
|
test-macos (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.10):
src/py_build_cmake/config/load.py#L145
py_build_cmake.config.load:Name normalized from bare_c_module to bare-c-module
|
test-macos (3.10):
src/py_build_cmake/build.py#L499
py_build_cmake.build:Not copying generated stub file minimal_comp/_add_module.pyi because a .pyi file for the same module already exists
|
build-macos (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-macos (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-macos (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-macos (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-macos (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-macos (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
build-windows (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/upload-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
cibw (windows-2019)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.11)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-windows (3.12)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.8)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.9)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.7)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
test-macos (3.10)
Node.js 16 actions are deprecated. Please update the following actions to use Node.js 20: actions/checkout@v3, actions/setup-python@v4, actions/download-artifact@v3. For more information see: https://github.blog/changelog/2023-09-22-github-actions-transitioning-from-node-16-to-node-20/.
|
Artifacts
Produced during runtime
Name | Size | |
---|---|---|
py_build_cmake-src-3.10
Expired
|
50.1 KB |
|
py_build_cmake-src-3.11
Expired
|
50.1 KB |
|
py_build_cmake-src-3.12
Expired
|
50.1 KB |
|
py_build_cmake-src-3.7
Expired
|
50.1 KB |
|
py_build_cmake-src-3.8
Expired
|
50.1 KB |
|
py_build_cmake-src-3.9
Expired
|
50 KB |
|
py_build_cmake-whl-3.10
Expired
|
65.3 KB |
|
py_build_cmake-whl-3.11
Expired
|
65.3 KB |
|
py_build_cmake-whl-3.12
Expired
|
65.3 KB |
|
py_build_cmake-whl-3.7
Expired
|
65.3 KB |
|
py_build_cmake-whl-3.8
Expired
|
65.3 KB |
|
py_build_cmake-whl-3.9
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.10
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.11
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.12
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.7
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.8
Expired
|
65.3 KB |
|
py_build_cmake-whl-mac-3.9
Expired
|
65.3 KB |
|
py_build_cmake-whl-win-3.10
Expired
|
65.9 KB |
|
py_build_cmake-whl-win-3.11
Expired
|
65.9 KB |
|
py_build_cmake-whl-win-3.12
Expired
|
65.9 KB |
|
py_build_cmake-whl-win-3.7
Expired
|
65.9 KB |
|
py_build_cmake-whl-win-3.8
Expired
|
65.9 KB |
|
py_build_cmake-whl-win-3.9
Expired
|
65.9 KB |
|
pybind11_project-whl
Expired
|
2.15 MB |
|