Added nvdla driver #13

cybergaszcz · 2021-05-11T20:42:01Z

No description provided.

'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>

[ Upstream commit 5796015 ] When TEE target mirrors traffic to another interface, sk_buff may not have enough headroom to be processed correctly. ip_finish_output2() detect this situation for ipv4 and allocates new skb with enogh headroom. However ipv6 lacks this logic in ip_finish_output2 and it leads to skb_under_panic: skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP PTI CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G OE 5.13.0 #13 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x48/0x4a Call Trace: skb_push.cold.111+0x10/0x10 ipgre_header+0x24/0xf0 [ip_gre] neigh_connected_output+0xae/0xf0 ip6_finish_output2+0x1a8/0x5a0 ip6_output+0x5c/0x110 nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6] tee_tg6+0x2e/0x40 [xt_TEE] ip6t_do_table+0x294/0x470 [ip6_tables] nf_hook_slow+0x44/0xc0 nf_hook.constprop.34+0x72/0xe0 ndisc_send_skb+0x20d/0x2e0 ndisc_send_ns+0xd1/0x210 addrconf_dad_work+0x3c8/0x540 process_one_work+0x1d1/0x370 worker_thread+0x30/0x390 kthread+0x116/0x130 ret_from_fork+0x22/0x30 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

In __htab_map_lookup_and_delete_batch(), hash buckets are iterated over to count the number of elements in each bucket (bucket_size). If bucket_size is large enough, the multiplication to calculate kvmalloc() size could overflow, resulting in out-of-bounds write as reported by KASAN: [...] [ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112 [ 104.986889] [ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13 [ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 104.988104] Call Trace: [ 104.988410] dump_stack_lvl+0x34/0x44 [ 104.988706] print_address_description.constprop.0+0x21/0x140 [ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989622] kasan_report.cold+0x7f/0x11b [ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990239] kasan_check_range+0x17c/0x1e0 [ 104.990467] memcpy+0x39/0x60 [ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990982] ? __wake_up_common+0x4d/0x230 [ 104.991256] ? htab_of_map_free+0x130/0x130 [ 104.991541] bpf_map_do_batch+0x1fb/0x220 [...] In hashtable, if the elements' keys have the same jhash() value, the elements will be put into the same bucket. By putting a lot of elements into a single bucket, the value of bucket_size can be increased to trigger the integer overflow. Triggering the overflow is possible for both callers with CAP_SYS_ADMIN and callers without CAP_SYS_ADMIN. It will be trivial for a caller with CAP_SYS_ADMIN to intentionally reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set the random seed passed to jhash() to 0, it will be easy for the caller to prepare keys which will be hashed into the same value, and thus put all the elements into the same bucket. If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be used. However, it will be still technically possible to trigger the overflow, by guessing the random seed value passed to jhash() (32bit) and repeating the attempt to trigger the overflow. In this case, the probability to trigger the overflow will be low and will take a very long time. Fix the integer overflow by calling kvmalloc_array() instead of kvmalloc() to allocate memory. Fixes: 0579963 ("bpf: Add batch ops to all htab bpf map") Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com

[ Upstream commit c4eb1f4 ] In __htab_map_lookup_and_delete_batch(), hash buckets are iterated over to count the number of elements in each bucket (bucket_size). If bucket_size is large enough, the multiplication to calculate kvmalloc() size could overflow, resulting in out-of-bounds write as reported by KASAN: [...] [ 104.986052] BUG: KASAN: vmalloc-out-of-bounds in __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.986489] Write of size 4194224 at addr ffffc9010503be70 by task crash/112 [ 104.986889] [ 104.987193] CPU: 0 PID: 112 Comm: crash Not tainted 5.14.0-rc4 #13 [ 104.987552] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 104.988104] Call Trace: [ 104.988410] dump_stack_lvl+0x34/0x44 [ 104.988706] print_address_description.constprop.0+0x21/0x140 [ 104.988991] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989327] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.989622] kasan_report.cold+0x7f/0x11b [ 104.989881] ? __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990239] kasan_check_range+0x17c/0x1e0 [ 104.990467] memcpy+0x39/0x60 [ 104.990670] __htab_map_lookup_and_delete_batch+0x5ce/0xb60 [ 104.990982] ? __wake_up_common+0x4d/0x230 [ 104.991256] ? htab_of_map_free+0x130/0x130 [ 104.991541] bpf_map_do_batch+0x1fb/0x220 [...] In hashtable, if the elements' keys have the same jhash() value, the elements will be put into the same bucket. By putting a lot of elements into a single bucket, the value of bucket_size can be increased to trigger the integer overflow. Triggering the overflow is possible for both callers with CAP_SYS_ADMIN and callers without CAP_SYS_ADMIN. It will be trivial for a caller with CAP_SYS_ADMIN to intentionally reach this overflow by enabling BPF_F_ZERO_SEED. As this flag will set the random seed passed to jhash() to 0, it will be easy for the caller to prepare keys which will be hashed into the same value, and thus put all the elements into the same bucket. If the caller does not have CAP_SYS_ADMIN, BPF_F_ZERO_SEED cannot be used. However, it will be still technically possible to trigger the overflow, by guessing the random seed value passed to jhash() (32bit) and repeating the attempt to trigger the overflow. In this case, the probability to trigger the overflow will be low and will take a very long time. Fix the integer overflow by calling kvmalloc_array() instead of kvmalloc() to allocate memory. Fixes: 0579963 ("bpf: Add batch ops to all htab bpf map") Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210806150419.109658-1-th.yasumatsu@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 57f0ff0 upstream. It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 #1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 #2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 #3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 #4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 #5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 #6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 #7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 #8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 #9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 #10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 #11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 #12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 #13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 #14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 #15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 #16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 #17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 #18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame #2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <mpetlan@redhat.com> CC: Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: kasan: Fix __get_user_check failure with kasan In macro __get_user_check defined in arch/arm/include/asm/uaccess.h, error code is store in register int __e(r0). When kasan is enabled, assigning value to kernel address might trigger kasan check, which unexpectedly overwrites r0 and causes undefined behavior on arm kasan images. One example is failure in do_futex and results in process soft lockup. Log: watchdog: BUG: soft lockup - CPU#0 stuck for 62946ms! [rs:main Q:Reg:1151] ... (__asan_store4) from (futex_wait_setup+0xf8/0x2b4) (futex_wait_setup) from (futex_wait+0x138/0x394) (futex_wait) from (do_futex+0x164/0xe40) (do_futex) from (sys_futex_time32+0x178/0x230) (sys_futex_time32) from (ret_fast_syscall+0x0/0x50) The soft lockup happens in function futex_wait_setup. The reason is function get_futex_value_locked always return EINVAL, thus pc jump back to retry label and causes looping. This line in function get_futex_value_locked ret = __get_user(*dest, from); is expanded to *dest = (typeof(*(p))) __r2; , in macro __get_user_check. Writing to pointer dest triggers kasan check and overwrites the return value of __get_user_x function. The assembly code of get_futex_value_locked in kernel/futex.c: ... c01f6dc8: eb0b020e bl c04b7608 <__get_user_4> // "x = (typeof(*(p))) __r2;" triggers kasan check and r0 is overwritten c01f6dCc: e1a00007 mov r0, r7 c01f6dd0: e1a05002 mov r5, r2 c01f6dd4: eb04f1e6 bl c0333574 <__asan_store4> c01f6dd8: e5875000 str r5, [r7] // save ret value of __get_user(*dest, from), which is dest address now c01f6ddc: e1a05000 mov r5, r0 ... // checking return value of __get_user failed c01f6e00: e3550000 cmp r5, #0 ... c01f6e0c: 01a00005 moveq r0, r5 // assign return value to EINVAL c01f6e10: 13e0000d mvnne r0, #13 Return value is the destination address of get_user thus certainly non-zero, so get_futex_value_locked always return EINVAL. Fix it by using a tmp vairable to store the error code before the assignment. This fix has no effects to non-kasan images thanks to compiler optimization. It only affects cases that overwrite r0 due to kasan check. This should fix bug discussed in Link: [1] https://lore.kernel.org/linux-arm-kernel/0ef7c2a5-5d8b-c5e0-63fa-31693fd4495c@gmail.com/ Fixes: 4210157 ("ARM: 9017/2: Enable KASan for ARM") Signed-off-by: Lexi Shao <shaolexi@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

[ Upstream commit b93c6a9 ] When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f9535d2 ] Similar to commit b8d8436 ("drm/i915/gt: Hold RPM wakelock during PXP suspend") but to fix the same warning for unbind during shutdown: ------------[ cut here ]------------ RPM wakelock ref not held during HW access WARNING: CPU: 0 PID: 4139 at drivers/gpu/drm/i915/intel_runtime_pm.h:115 gen12_fwtable_write32+0x1b7/0 Modules linked in: 8021q ccm rfcomm cmac algif_hash algif_skcipher af_alg uinput snd_hda_codec_hdmi vf industrialio iwl7000_mac80211 cros_ec_sensorhub lzo_rle lzo_compress zram iwlwifi cfg80211 joydev CPU: 0 PID: 4139 Comm: halt Tainted: G U W 5.10.84 #13 344e11e079c4a03940d949e537eab645f6 RIP: 0010:gen12_fwtable_write32+0x1b7/0x200 Code: 48 c7 c7 fc b3 b5 89 31 c0 e8 2c f3 ad ff 0f 0b e9 04 ff ff ff c6 05 71 e9 1d 01 01 48 c7 c7 d67 RSP: 0018:ffffa09ec0bb3bb0 EFLAGS: 00010246 RAX: 12dde97bbd260300 RBX: 00000000000320f0 RCX: ffffffff89e60ea0 RDX: 0000000000000000 RSI: 00000000ffffdfff RDI: ffffffff89e60e70 RBP: ffffa09ec0bb3bd8 R08: 0000000000000000 R09: ffffa09ec0bb3950 R10: 00000000ffffdfff R11: ffffffff89e91160 R12: 0000000000000000 R13: 0000000028121969 R14: ffff9515c32f0990 R15: 0000000040000000 FS: 0000790dcf225740(0000) GS:ffff951737800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000058b25efae147 CR3: 0000000133ea6001 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: intel_pxp_fini_hw+0x2f/0x39 i915_pxp_tee_component_unbind+0x1c/0x42 component_unbind+0x32/0x48 component_unbind_all+0x80/0x9d take_down_master+0x24/0x36 component_master_del+0x56/0x70 mei_pxp_remove+0x2c/0x68 mei_cl_device_remove+0x35/0x68 device_release_driver_internal+0x100/0x1a1 mei_cl_bus_remove_device+0x21/0x79 mei_cl_bus_remove_devices+0x3b/0x51 mei_stop+0x3b/0xae mei_me_shutdown+0x23/0x58 device_shutdown+0x144/0x1d3 kernel_power_off+0x13/0x4c __se_sys_reboot+0x1d4/0x1e9 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x790dcf316273 Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 89 fa be 69 19 12 28 bf ad8 RSP: 002b:00007ffca0df9198 EFLAGS: 00000202 ORIG_RAX: 00000000000000a9 RAX: ffffffffffffffda RBX: 000000004321fedc RCX: 0000790dcf316273 RDX: 000000004321fedc RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007ffca0df9200 R08: 0000000000000007 R09: 0000563ce8cd8970 R10: 0000000000000000 R11: 0000000000000202 R12: 00007ffca0df9308 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003 ---[ end trace 2f501b01b348f114 ]--- ACPI: Preparing to enter system sleep state S5 reboot: Power down Changes since v1: - Rebase to latest drm-tip Fixes: 0cfab4c ("drm/i915/pxp: Enable PXP power management") Suggested-by: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Juston Li <juston.li@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220106200236.489656-2-juston.li@intel.com (cherry picked from commit 57ded5f) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

There is only one "goto done;" in set_device_flags() and this happens *before* hci_dev_lock() is called, move the done label to after the hci_dev_unlock() to fix the following unlock balance: [ 31.493567] ===================================== [ 31.493571] WARNING: bad unlock balance detected! [ 31.493576] 5.17.0-rc2+ #13 Tainted: G C E [ 31.493581] ------------------------------------- [ 31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at: [ 31.493594] [<ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth] [ 31.493684] but there are no more locks to release! Note this bug has been around for a couple of years, but before commit fe92ee6 ("Bluetooth: hci_core: Rework hci_conn_params flags") supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so the check for unsupported flags which does the "goto done;" never triggered. Fixes: fe92ee6 ("Bluetooth: hci_core: Rework hci_conn_params flags") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com Fixes: 5fbda3e ("sched: highmem: Store local kmaps in task struct") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the actual length of volume coherency data when setting the xattr to avoid the following KASAN report. BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] Write of size 4 at addr ffff888101e02af4 by task kworker/6:0/1347 CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 Workqueue: events fscache_create_volume_work [fscache] Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_report+0xab/0x120 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] ? __cachefiles_free_volume+0x90/0x90 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 ? process_one_work+0x6a0/0x6a0 kthread+0x16c/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Allocated by task 1347: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 cachefiles_set_volume_xattr+0x76/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 kthread+0x16c/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888101e02af0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 4 bytes inside of 8-byte region [ffff888101e02af0, ffff888101e02af8) The buggy address belongs to the physical page: page:00000000a2292d70 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x101e02 flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280 raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 >ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc ^ ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc ================================================================== Fixes: 413a4a6 "cachefiles: Fix volume coherency attribute" Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/20220405134649.6579-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20220405142810.8208-1-dwysocha@redhat.com/ # Incorrect v2

[ Upstream commit fe2640b ] In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed. Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <zdai@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 66f133c upstream. When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check that even slots in the tsk->kmap_ctrl.pteval are unmapped. The slots are initialized with 0 value, but the check is done with pte_none. 0 pte however does not necessarily mean that pte_none will return true. e.g. on xtensa it returns false, resulting in the following runtime warnings: WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_out+0x51/0x108 __schedule+0x71a/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0 CPU: 0 PID: 101 Comm: touch Tainted: G W 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13 Call Trace: dump_stack+0xc/0x40 __warn+0x8f/0x174 warn_slowpath_fmt+0x48/0xac __kmap_local_sched_in+0x50/0xe0 finish_task_switch$isra$0+0x1ce/0x2f8 __schedule+0x86e/0x9c4 preempt_schedule_irq+0xa0/0xe0 common_exception_return+0x5c/0x93 do_wp_page+0x30e/0x330 handle_mm_fault+0xa70/0xc3c do_page_fault+0x1d8/0x3c4 common_exception+0x7f/0x7f Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0. Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com Fixes: 5fbda3e ("sched: highmem: Store local kmaps in task struct") Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7b2f6c3 ] Use the actual length of volume coherency data when setting the xattr to avoid the following KASAN report. BUG: KASAN: slab-out-of-bounds in cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] Write of size 4 at addr ffff888101e02af4 by task kworker/6:0/1347 CPU: 6 PID: 1347 Comm: kworker/6:0 Kdump: loaded Not tainted 5.18.0-rc1-nfs-fscache-netfs+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-4.fc34 04/01/2014 Workqueue: events fscache_create_volume_work [fscache] Call Trace: <TASK> dump_stack_lvl+0x45/0x5a print_report.cold+0x5e/0x5db ? __lock_text_start+0x8/0x8 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_report+0xab/0x120 ? cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] kasan_check_range+0xf5/0x1d0 memcpy+0x39/0x60 cachefiles_set_volume_xattr+0xa0/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] ? __cachefiles_free_volume+0x90/0x90 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 ? process_one_work+0x6a0/0x6a0 kthread+0x16c/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> Allocated by task 1347: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 cachefiles_set_volume_xattr+0x76/0x350 [cachefiles] cachefiles_acquire_volume+0x2be/0x500 [cachefiles] fscache_create_volume_work+0x68/0x160 [fscache] process_one_work+0x3b7/0x6a0 worker_thread+0x2c4/0x650 kthread+0x16c/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888101e02af0 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 4 bytes inside of 8-byte region [ffff888101e02af0, ffff888101e02af8) The buggy address belongs to the physical page: page:00000000a2292d70 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x101e02 flags: 0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0000200 0000000000000000 dead000000000001 ffff888100042280 raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888101e02980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc ffff888101e02a00: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 >ffff888101e02a80: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 04 fc ^ ffff888101e02b00: fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc ffff888101e02b80: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc ================================================================== Fixes: 413a4a6 "cachefiles: Fix volume coherency attribute" Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/20220405134649.6579-1-dwysocha@redhat.com/ # v1 Link: https://lore.kernel.org/r/20220405142810.8208-1-dwysocha@redhat.com/ # Incorrect v2 Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f75fd4b ] While booting secondary CPUs, cpus_read_[lock/unlock] is not keeping online cpumask stable. The transient online mask results in below calltrace. [ 0.324121] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.346652] Detected PIPT I-cache on CPU2 [ 0.347212] CPU2: Booted secondary processor 0x0000000002 [0x410fd083] [ 0.377255] Detected PIPT I-cache on CPU3 [ 0.377823] CPU3: Booted secondary processor 0x0000000003 [0x410fd083] [ 0.379040] ------------[ cut here ]------------ [ 0.383662] WARNING: CPU: 0 PID: 10 at kernel/workqueue.c:3084 __flush_work+0x12c/0x138 [ 0.384850] Modules linked in: [ 0.385403] CPU: 0 PID: 10 Comm: rcu_tasks_rude_ Not tainted 5.17.0-rc3-v8+ #13 [ 0.386473] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 0.387289] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.388308] pc : __flush_work+0x12c/0x138 [ 0.388970] lr : __flush_work+0x80/0x138 [ 0.389620] sp : ffffffc00aaf3c60 [ 0.390139] x29: ffffffc00aaf3d20 x28: ffffffc009c16af0 x27: ffffff80f761df48 [ 0.391316] x26: 0000000000000004 x25: 0000000000000003 x24: 0000000000000100 [ 0.392493] x23: ffffffffffffffff x22: ffffffc009c16b10 x21: ffffffc009c16b28 [ 0.393668] x20: ffffffc009e53861 x19: ffffff80f77fbf40 x18: 00000000d744fcc9 [ 0.394842] x17: 000000000000000b x16: 00000000000001c2 x15: ffffffc009e57550 [ 0.396016] x14: 0000000000000000 x13: ffffffffffffffff x12: 0000000100000000 [ 0.397190] x11: 0000000000000462 x10: ffffff8040258008 x9 : 0000000100000000 [ 0.398364] x8 : 0000000000000000 x7 : ffffffc0093c8bf4 x6 : 0000000000000000 [ 0.399538] x5 : 0000000000000000 x4 : ffffffc00a976e40 x3 : ffffffc00810444c [ 0.400711] x2 : 0000000000000004 x1 : 0000000000000000 x0 : 0000000000000000 [ 0.401886] Call trace: [ 0.402309] __flush_work+0x12c/0x138 [ 0.402941] schedule_on_each_cpu+0x228/0x278 [ 0.403693] rcu_tasks_rude_wait_gp+0x130/0x144 [ 0.404502] rcu_tasks_kthread+0x220/0x254 [ 0.405264] kthread+0x174/0x1ac [ 0.405837] ret_from_fork+0x10/0x20 [ 0.406456] irq event stamp: 102 [ 0.406966] hardirqs last enabled at (101): [<ffffffc0093c8468>] _raw_spin_unlock_irq+0x78/0xb4 [ 0.408304] hardirqs last disabled at (102): [<ffffffc0093b8270>] el1_dbg+0x24/0x5c [ 0.409410] softirqs last enabled at (54): [<ffffffc0081b80c8>] local_bh_enable+0xc/0x2c [ 0.410645] softirqs last disabled at (50): [<ffffffc0081b809c>] local_bh_disable+0xc/0x2c [ 0.411890] ---[ end trace 0000000000000000 ]--- [ 0.413000] smp: Brought up 1 node, 4 CPUs [ 0.413762] SMP: Total of 4 processors activated. [ 0.414566] CPU features: detected: 32-bit EL0 Support [ 0.415414] CPU features: detected: 32-bit EL1 Support [ 0.416278] CPU features: detected: CRC32 instructions [ 0.447021] Callback from call_rcu_tasks_rude() invoked. [ 0.506693] Callback from call_rcu_tasks() invoked. This commit therefore fixes this issue by applying a single-CPU optimization to the RCU Tasks Rude grace-period process. The key point here is that the purpose of this RCU flavor is to force a schedule on each online CPU since some past event. But the rcu_tasks_rude_wait_gp() function runs in the context of the RCU Tasks Rude's grace-period kthread, so there must already have been a context switch on the current CPU since the call to either synchronize_rcu_tasks_rude() or call_rcu_tasks_rude(). So if there is only a single CPU online, RCU Tasks Rude's grace-period kthread does not need to anything at all. It turns out that the rcu_tasks_rude_wait_gp() function's call to schedule_on_each_cpu() causes problems during early boot. During that time, there is only one online CPU, namely the boot CPU. Therefore, applying this single-CPU optimization fixes early-boot instances of this problem. Link: https://lore.kernel.org/lkml/20220210184319.25009-1-treasure4paddy@gmail.com/T/ Suggested-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Padmanabha Srinivasaiah <treasure4paddy@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f4534c9 upstream. We got issue as follows: EXT4-fs error (device loop0) in ext4_reserve_inode_write:5741: Out of memory EXT4-fs error (device loop0): ext4_setattr:5462: inode #13: comm syz-executor.0: mark_inode_dirty error EXT4-fs error (device loop0) in ext4_setattr:5519: Out of memory EXT4-fs error (device loop0): ext4_ind_map_blocks:595: inode #13: comm syz-executor.0: Can't allocate blocks for non-extent mapped inodes with bigalloc ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4361 at fs/ext4/file.c:301 ext4_file_write_iter+0x11c9/0x1220 Modules linked in: CPU: 1 PID: 4361 Comm: syz-executor.0 Not tainted 5.10.0+ #1 RIP: 0010:ext4_file_write_iter+0x11c9/0x1220 RSP: 0018:ffff924d80b27c00 EFLAGS: 00010282 RAX: ffffffff815a3379 RBX: 0000000000000000 RCX: 000000003b000000 RDX: ffff924d81601000 RSI: 00000000000009cc RDI: 00000000000009cd RBP: 000000000000000d R08: ffffffffbc5a2c6b R09: 0000902e0e52a96f R10: ffff902e2b7c1b40 R11: ffff902e2b7c1b40 R12: 000000000000000a R13: 0000000000000001 R14: ffff902e0e52aa10 R15: ffffffffffffff8b FS: 00007f81a7f65700(0000) GS:ffff902e3bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 000000012db88001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: do_iter_readv_writev+0x2e5/0x360 do_iter_write+0x112/0x4c0 do_pwritev+0x1e5/0x390 __x64_sys_pwritev2+0x7e/0xa0 do_syscall_64+0x37/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Above issue may happen as follows: Assume inode.i_size=4096 EXT4_I(inode)->i_disksize=4096 step 1: set inode->i_isize = 8192 ext4_setattr if (attr->ia_size != inode->i_size) EXT4_I(inode)->i_disksize = attr->ia_size; rc = ext4_mark_inode_dirty ext4_reserve_inode_write ext4_get_inode_loc __ext4_get_inode_loc sb_getblk --> return -ENOMEM ... if (!error) ->will not update i_size i_size_write(inode, attr->ia_size); Now: inode.i_size=4096 EXT4_I(inode)->i_disksize=8192 step 2: Direct write 4096 bytes ext4_file_write_iter ext4_dio_write_iter iomap_dio_rw ->return error if (extend) ext4_handle_inode_extension WARN_ON_ONCE(i_size_read(inode) < EXT4_I(inode)->i_disksize); ->Then trigger warning. To solve above issue, if mark inode dirty failed in ext4_setattr just set 'EXT4_I(inode)->i_disksize' with old value. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20220326065351.761952-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e49 ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae ("arm64: module/ftrace: intialize PLT at load time") ... we can consistently determine the PLT address that a given callsite will use, and therefore ftrace_make_nop() does not need to skip validation when a PLT is in use. This patch factors the existing logic out of ftrace_make_call() and ftrace_make_nop() into a common ftrace_find_callable_addr() helper function, which is used by ftrace_make_call(), ftrace_make_nop(), and ftrace_modify_call(). In ftrace_make_nop() the patching is consistently validated by ftrace_modify_code() as we can always determine what the old instruction should have been. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit a625357 ] Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e49 ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae ("arm64: module/ftrace: intialize PLT at load time") ... we can consistently determine the PLT address that a given callsite will use, and therefore ftrace_make_nop() does not need to skip validation when a PLT is in use. This patch factors the existing logic out of ftrace_make_call() and ftrace_make_nop() into a common ftrace_find_callable_addr() helper function, which is used by ftrace_make_call(), ftrace_make_nop(), and ftrace_modify_call(). In ftrace_make_nop() the patching is consistently validated by ftrace_modify_code() as we can always determine what the old instruction should have been. Fixes: 3b23e49 ("arm64: implement ftrace with regs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Will Deacon <will@kernel.org> Tested-by: "Ivan T. Ivanov" <iivanov@suse.de> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220614080944.1349146-3-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d starfive-tech#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d starfive-tech#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 starfive-tech#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 starfive-tech#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac starfive-tech#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 starfive-tech#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 starfive-tech#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 starfive-tech#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 starfive-tech#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac starfive-tech#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d starfive-tech#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 starfive-tech#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 starfive-tech#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac starfive-tech#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 starfive-tech#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 starfive-tech#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 starfive-tech#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 starfive-tech#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac starfive-tech#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d starfive-tech#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…plate When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…plate commit 54abe19 upstream. When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ starfive-tech#13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20230613235416.1650755-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 starfive-tech#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 starfive-tech#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 starfive-tech#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 starfive-tech#6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 starfive-tech#7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 starfive-tech#8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 starfive-tech#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 starfive-tech#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 starfive-tech#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 starfive-tech#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 starfive-tech#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 starfive-tech#3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 starfive-tech#4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 starfive-tech#5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 starfive-tech#6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 starfive-tech#7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 starfive-tech#8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 starfive-tech#9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 starfive-tech#10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 starfive-tech#11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 starfive-tech#12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 starfive-tech#13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Link: https://lore.kernel.org/lkml/20230719202951.534582-5-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 starfive-tech#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 starfive-tech#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 starfive-tech#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 starfive-tech#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 starfive-tech#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 starfive-tech#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 starfive-tech#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 starfive-tech#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 starfive-tech#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 starfive-tech#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 starfive-tech#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 starfive-tech#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 starfive-tech#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 starfive-tech#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 starfive-tech#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 starfive-tech#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 starfive-tech#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 starfive-tech#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 starfive-tech#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 starfive-tech#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 starfive-tech#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 starfive-tech#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 starfive-tech#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 starfive-tech#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 starfive-tech#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 starfive-tech#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee starfive-tech#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 starfive-tech#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 starfive-tech#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c starfive-tech#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] starfive-tech#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] starfive-tech#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f starfive-tech#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 starfive-tech#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] starfive-tech#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc starfive-tech#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] starfive-tech#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] starfive-tech#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] starfive-tech#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] starfive-tech#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 starfive-tech#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] starfive-tech#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] starfive-tech#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 starfive-tech#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f starfive-tech#3 [fffffe0000549eb8] do_nmi at ffffffff81079582 starfive-tech#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- starfive-tech#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b starfive-tech#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 starfive-tech#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 starfive-tech#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] starfive-tech#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] starfive-tech#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] starfive-tech#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] starfive-tech#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb starfive-tech#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 starfive-tech#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 starfive-tech#15 [ffff88aa841efb88] device_del at ffffffff82179d23 starfive-tech#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] starfive-tech#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] starfive-tech#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a starfive-tech#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff starfive-tech#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 starfive-tech#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…plate commit 54abe19 upstream. When commit 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") repurposed the writeback_dirty_page trace event as a template to create its new wait_on_page_writeback trace event, it ended up opening a window to NULL pointer dereference crashes due to the (infrequent) occurrence of a race where an access to a page in the swap-cache happens concurrently with the moment this page is being written to disk and the tracepoint is enabled: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 800000010ec0a067 P4D 800000010ec0a067 PUD 102353067 PMD 0 Oops: 0000 [Fishwaldo#1] PREEMPT SMP PTI CPU: 1 PID: 1320 Comm: shmem-worker Kdump: loaded Not tainted 6.4.0-rc5+ starfive-tech#13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230301gitf80f052277c8-1.fc37 03/01/2023 RIP: 0010:trace_event_raw_event_writeback_folio_template+0x76/0xf0 Code: 4d 85 e4 74 5c 49 8b 3c 24 e8 06 98 ee ff 48 89 c7 e8 9e 8b ee ff ba 20 00 00 00 48 89 ef 48 89 c6 e8 fe d4 1a 00 49 8b 04 24 <48> 8b 40 40 48 89 43 28 49 8b 45 20 48 89 e7 48 89 43 30 e8 a2 4d RSP: 0000:ffffaad580b6fb60 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff90e38035c01c RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff90e38035c044 RBP: ffff90e38035c024 R08: 0000000000000002 R09: 0000000000000006 R10: ffff90e38035c02e R11: 0000000000000020 R12: ffff90e380bac000 R13: ffffe3a7456d9200 R14: 0000000000001b81 R15: ffffe3a7456d9200 FS: 00007f2e4e8a15c0(0000) GS:ffff90e3fbc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 00000001150c6003 CR4: 0000000000170ee0 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x76/0x170 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x65/0x150 ? asm_exc_page_fault+0x22/0x30 ? trace_event_raw_event_writeback_folio_template+0x76/0xf0 folio_wait_writeback+0x6b/0x80 shmem_swapin_folio+0x24a/0x500 ? filemap_get_entry+0xe3/0x140 shmem_get_folio_gfp+0x36e/0x7c0 ? find_busiest_group+0x43/0x1a0 shmem_fault+0x76/0x2a0 ? __update_load_avg_cfs_rq+0x281/0x2f0 __do_fault+0x33/0x130 do_read_fault+0x118/0x160 do_pte_missing+0x1ed/0x2a0 __handle_mm_fault+0x566/0x630 handle_mm_fault+0x91/0x210 do_user_addr_fault+0x22c/0x740 exc_page_fault+0x65/0x150 asm_exc_page_fault+0x22/0x30 This problem arises from the fact that the repurposed writeback_dirty_page trace event code was written assuming that every pointer to mapping (struct address_space) would come from a file-mapped page-cache object, thus mapping->host would always be populated, and that was a valid case before commit 19343b5. The swap-cache address space (swapper_spaces), however, doesn't populate its ->host (struct inode) pointer, thus leading to the crashes in the corner-case aforementioned. commit 19343b5 ended up breaking the assignment of __entry->name and __entry->ino for the wait_on_page_writeback tracepoint -- both dependent on mapping->host carrying a pointer to a valid inode. The assignment of __entry->name was fixed by commit 68f23b8 ("memcg: fix a crash in wb_workfn when a device disappears"), and this commit fixes the remaining case, for __entry->ino. Link: https://lkml.kernel.org/r/20230606233613.1290819-1-aquini@redhat.com Fixes: 19343b5 ("mm/page-writeback: introduce tracepoint for wait_on_page_writeback()") Signed-off-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Yafang Shao <laoar.shao@gmail.com> Cc: Aristeu Rozanski <aris@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e starfive-tech#3 [fffffe00003fced0] do_nmi at ffffffff8922660d starfive-tech#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 starfive-tech#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 starfive-tech#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 starfive-tech#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 starfive-tech#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 starfive-tech#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 starfive-tech#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 starfive-tech#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 starfive-tech#12 [ffffa65531497b68] printk at ffffffff89318306 starfive-tech#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 starfive-tech#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] starfive-tech#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] starfive-tech#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] starfive-tech#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] starfive-tech#18 [ffffa65531497f10] kthread at ffffffff892d2e72 starfive-tech#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561 starfive-tech#21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 starfive-tech#1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) starfive-tech#2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) starfive-tech#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 starfive-tech#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 starfive-tech#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 starfive-tech#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 starfive-tech#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 starfive-tech#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 starfive-tech#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 starfive-tech#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 starfive-tech#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 starfive-tech#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 starfive-tech#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 starfive-tech#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 starfive-tech#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 starfive-tech#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 starfive-tech#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 starfive-tech#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 starfive-tech#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 starfive-tech#20 0x55c9400e53ad in main tools/perf/perf.c:561 starfive-tech#21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 starfive-tech#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 starfive-tech#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Ben Gainey <ben.gainey@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Li Dong <lidong@vivo.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Cc: Paran Lee <p4ranlee@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/20240507183545.1236093-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [starfive-tech#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 starfive-tech#6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) starfive-tech#1 btrfs_drop_extents (fs/btrfs/file.c:411:4) starfive-tech#2 log_one_extent (fs/btrfs/tree-log.c:4732:9) starfive-tech#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) starfive-tech#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) starfive-tech#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) starfive-tech#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) starfive-tech#7 btrfs_sync_file (fs/btrfs/file.c:1933:8) starfive-tech#8 vfs_fsync_range (fs/sync.c:188:9) starfive-tech#9 vfs_fsync (fs/sync.c:202:9) starfive-tech#10 do_fsync (fs/sync.c:212:9) starfive-tech#11 __do_sys_fdatasync (fs/sync.c:225:9) starfive-tech#12 __se_sys_fdatasync (fs/sync.c:223:1) starfive-tech#13 __x64_sys_fdatasync (fs/sync.c:223:1) starfive-tech#14 do_syscall_x64 (arch/x86/entry/common.c:52:14) starfive-tech#15 do_syscall_64 (arch/x86/entry/common.c:83:7) starfive-tech#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 starfive-tech#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] starfive-tech#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] starfive-tech#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] starfive-tech#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] starfive-tech#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] starfive-tech#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] starfive-tech#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] starfive-tech#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] starfive-tech#11 dio_complete at ffffffff8c2b9fa7 starfive-tech#12 do_blockdev_direct_IO at ffffffff8c2bc09f starfive-tech#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] starfive-tech#14 generic_file_direct_write at ffffffff8c1dcf14 starfive-tech#15 __generic_file_write_iter at ffffffff8c1dd07b starfive-tech#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] starfive-tech#17 aio_write at ffffffff8c2cc72e starfive-tech#18 kmem_cache_alloc at ffffffff8c248dde starfive-tech#19 do_io_submit at ffffffff8c2ccada starfive-tech#20 do_syscall_64 at ffffffff8c004984 starfive-tech#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 starfive-tech#6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) starfive-tech#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) starfive-tech#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) starfive-tech#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) starfive-tech#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) starfive-tech#7 btrfs_sync_file (fs/btrfs/file.c:1933:8) starfive-tech#8 vfs_fsync_range (fs/sync.c:188:9) starfive-tech#9 vfs_fsync (fs/sync.c:202:9) starfive-tech#10 do_fsync (fs/sync.c:212:9) starfive-tech#11 __do_sys_fdatasync (fs/sync.c:225:9) starfive-tech#12 __se_sys_fdatasync (fs/sync.c:223:1) starfive-tech#13 __x64_sys_fdatasync (fs/sync.c:223:1) starfive-tech#14 do_syscall_x64 (arch/x86/entry/common.c:52:14) starfive-tech#15 do_syscall_64 (arch/x86/entry/common.c:83:7) starfive-tech#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 starfive-tech#3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] starfive-tech#4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] starfive-tech#5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] starfive-tech#6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] starfive-tech#7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] starfive-tech#8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] starfive-tech#9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] starfive-tech#10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] starfive-tech#11 dio_complete at ffffffff8c2b9fa7 starfive-tech#12 do_blockdev_direct_IO at ffffffff8c2bc09f starfive-tech#13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] starfive-tech#14 generic_file_direct_write at ffffffff8c1dcf14 starfive-tech#15 __generic_file_write_iter at ffffffff8c1dd07b starfive-tech#16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] starfive-tech#17 aio_write at ffffffff8c2cc72e starfive-tech#18 kmem_cache_alloc at ffffffff8c248dde starfive-tech#19 do_io_submit at ffffffff8c2ccada starfive-tech#20 do_syscall_64 at ffffffff8c004984 starfive-tech#21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5c0b485 ] syzkaller triggered the warning [0] in udp_v4_early_demux(). In udp_v[46]_early_demux() and sk_lookup(), we do not touch the refcount of the looked-up sk and use sock_pfree() as skb->destructor, so we check SOCK_RCU_FREE to ensure that the sk is safe to access during the RCU grace period. Currently, SOCK_RCU_FREE is flagged for a bound socket after being put into the hash table. Moreover, the SOCK_RCU_FREE check is done too early in udp_v[46]_early_demux() and sk_lookup(), so there could be a small race window: CPU1 CPU2 ---- ---- udp_v4_early_demux() udp_lib_get_port() | |- hlist_add_head_rcu() |- sk = __udp4_lib_demux_lookup() | |- DEBUG_NET_WARN_ON_ONCE(sk_is_refcounted(sk)); `- sock_set_flag(sk, SOCK_RCU_FREE) We had the same bug in TCP and fixed it in commit 871019b ("net: set SOCK_RCU_FREE before inserting socket into hashtable"). Let's apply the same fix for UDP. [0]: WARNING: CPU: 0 PID: 11198 at net/ipv4/udp.c:2599 udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Modules linked in: CPU: 0 PID: 11198 Comm: syz-executor.1 Not tainted 6.9.0-g93bda33046e7 starfive-tech#13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:udp_v4_early_demux+0x481/0xb70 net/ipv4/udp.c:2599 Code: c5 7a 15 fe bb 01 00 00 00 44 89 e9 31 ff d3 e3 81 e3 bf ef ff ff 89 de e8 2c 74 15 fe 85 db 0f 85 02 06 00 00 e8 9f 7a 15 fe <0f> 0b e8 98 7a 15 fe 49 8d 7e 60 e8 4f 39 2f fe 49 c7 46 60 20 52 RSP: 0018:ffffc9000ce3fa58 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8318c92c RDX: ffff888036ccde00 RSI: ffffffff8318c2f1 RDI: 0000000000000001 RBP: ffff88805a2dd6e0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0001ffffffffffff R12: ffff88805a2dd680 R13: 0000000000000007 R14: ffff88800923f900 R15: ffff88805456004e FS: 00007fc449127640(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc449126e38 CR3: 000000003de4b002 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ip_rcv_finish_core.constprop.0+0xbdd/0xd20 net/ipv4/ip_input.c:349 ip_rcv_finish+0xda/0x150 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip_rcv+0x16c/0x180 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core+0xb3/0xe0 net/core/dev.c:5624 __netif_receive_skb+0x21/0xd0 net/core/dev.c:5738 netif_receive_skb_internal net/core/dev.c:5824 [inline] netif_receive_skb+0x271/0x300 net/core/dev.c:5884 tun_rx_batched drivers/net/tun.c:1549 [inline] tun_get_user+0x24db/0x2c50 drivers/net/tun.c:2002 tun_chr_write_iter+0x107/0x1a0 drivers/net/tun.c:2048 new_sync_write fs/read_write.c:497 [inline] vfs_write+0x76f/0x8d0 fs/read_write.c:590 ksys_write+0xbf/0x190 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x41/0x50 fs/read_write.c:652 x64_sys_call+0xe66/0x1990 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7fc44a68bc1f Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 e9 cf f5 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 3c d0 f5 ff 48 RSP: 002b:00007fc449126c90 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007fc44a68bc1f RDX: 0000000000000032 RSI: 00000000200000c0 RDI: 00000000000000c8 RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000032 R11: 0000000000000293 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc44a5ec530 R15: 0000000000000000 </TASK> Fixes: 6acc9b4 ("bpf: Add helper to retrieve socket in BPF") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240709191356.24010-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

farzadfch and others added 7 commits November 1, 2018 23:09

nvdla: add NVDLA driver

ae5775c

add the atom size for nv_small

0b8fd07

update nvdla driver

b6d83bc

added NVDLA driver

6bfea6a

Merge branch 'firesim-nvdla' of ../new/riscv-linux into nvdla

8fd1b70

merge with nvdla/sw

7a19c8b

corrected build with new version of kernel

7afadb5

cybergaszcz closed this May 12, 2021

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added nvdla driver #13

Added nvdla driver #13

cybergaszcz commented May 11, 2021

Added nvdla driver #13

Added nvdla driver #13

Conversation

cybergaszcz commented May 11, 2021