5a6
> bridge.1.comment=
16d16
< dyndns.1.servicename=dyndns.org
45d44
< netconf.3.autoip.status=enabled
51a51
> netconf.3.up=enabled
54,56c54,62
< ntpclient.1.server=0.ubnt.pool.ntp.org
< ntpclient.1.status=disabled
< ntpclient.status=disabled
---
> ntpclient.1.server=0.pool.ntp.org
> ntpclient.1.status=enabled
> ntpclient.2.server=1.pool.ntp.org
> ntpclient.2.status=enabled
> ntpclient.3.server=2.pool.ntp.org
> ntpclient.3.status=enabled
> ntpclient.4.server=3.pool.ntp.org
> ntpclient.4.status=enabled
> ntpclient.status=enabled
61,102c67
< radio.1.ack.auto=enabled
< radio.1.ackdistance=643
< radio.1.acktimeout=35
< radio.1.ampdu.frames=32
< radio.1.ampdu.status=enabled
< radio.1.antenna.gain=3
< radio.1.antenna.id=2
< radio.1.atpc.sta.status=enabled
< radio.1.atpc.status=disabled
< radio.1.atpc.threshold=36
< radio.1.cable.loss=0
< radio.1.center.1.freq=0
< radio.1.chanbw=0
< radio.1.cmsbias=0
< radio.1.countrycode=380
< radio.1.cwm.enable=0
< radio.1.cwm.mode=1
< radio.1.devname=ath0
< radio.1.dfs.status=enabled
< radio.1.freq=0
< radio.1.ieee_mode=auto
< radio.1.low_txpower_mode=disabled
< radio.1.mode=managed
< radio.1.obey=enabled
< radio.1.polling_11ac_11n_compat=0
< radio.1.polling=enabled
< radio.1.polling_ff_dl_ratio=50
< radio.1.polling_ff_dur=0
< radio.1.polling_ff_timing=0
< radio.1.pollingnoack=0
< radio.1.pollingpri=2
< radio.1.ptpmode=1
< radio.1.reg_obey=enabled
< radio.1.rx_sensitivity=-96
< radio.1.scanbw.status=disabled
< radio.1.scan_list.status=disabled
< radio.1.status=enabled
< radio.1.subsystemid=0xe7f5
< radio.1.txpower=24
< radio.countrycode=380
< radio.status=enabled
< resolv.host.1.name=PowerBeam 5AC 400
---
> resolv.host.1.name=airos
104c69
< resolv.nameserver.status=enabled
---
> resolv.status=enabled
112c77,79
< snmp.status=disabled
---
> snmp.contact=edoput@lilik.it
> snmp.location=
> snmp.status=enabled
124c91
< system.cfg.version=65547
---
> system.cfg.version=0
127,128d93
< system.latitude=43
< system.longitude=55
132,133d96
< tshaper.status=disabled
< unms.status=disabled
138,141d100
< users.2.gid=100
< users.2.shell=/bin/false
< users.2.status=disabled
< users.2.uid=100
142a102
> vlan.status=enabled
143a104
> wireless.1.ap=00:11:22:33:44:55
153,156c114,117
< wireless.1.signal_led1=94
< wireless.1.signal_led2=80
< wireless.1.signal_led3=73
< wireless.1.signal_led4=65
---
> wireless.1.signal_led1=75
> wireless.1.signal_led2=50
> wireless.1.signal_led3=25
> wireless.1.signal_led4=15