//*******************************************************************/

/* 该程序为点阵图形LCD模块的C51示例程序
// LCD控制器型号：UC1638C或其它兼容控制器
// 本程序可驱动LCD型号为: 
	LG192961&2-I2C
// 驱动MCU: AT89S52 

//*******************************************************************/

#include <AT89X52.H>
#include <intrins.h>
#include <string.h>

#define	uchar unsigned char	
#define uint unsigned int

//*************** 端口地址定义 **************************************

#define SCL         P0_0
#define SDA         P0_3
#define LCD_RST     P1_6					//RST->P1.6

#define INT_1		P3_3

//*****************函数列表******************************************

void delay_ms(uint);						// 延时 1 ms
void delay_us(uint us);
void Int1(void);
void start(void);
void stop(void);
void ack(void);
void n_ack(void);
void check_ack(void);
void sendbyte(uchar dat);
uchar recbyte(void);
void sendnbyte(uchar *str);
void recnbyte(uchar n);
void lcd_cmdwrite(uchar cmdx);				// 写指令
void lcd_datawrite(uchar datax);			// 写数据
void setcursor(uchar x,uchar y);
void clr_screen(void);						// 清屏
void display(uchar data1,uchar data2);
void dis_square(uchar *squ_tab);
void one_word(uchar x,uchar y,uchar *Lib,uchar ch_num,uchar widthw);
void dis_word(uchar x,uchar y,uchar *str,uchar ch8_16);
void lcd_init(void);
void vop_13_5v(void);
void GS_07170_main(void);
void GS_07168_main(void);
void main(void);

//******************数组列表*****************************************

uchar code STR_19296_1[];						// 自定义字符串	
uchar code STR_19296_2[];					
uchar code STR_19296_3[];				
uchar code STR_19296_4[];				
uchar code STR_19296_5[];
uchar code STR_19296_6[];

uchar code ASC_8[];							// 8*8点阵ASCII字符字库
uchar code ASC_16[];
uchar code hz_tab[];						// 16*16点阵汉字库

uchar dot_x,dot_y;
uchar sbuf[8];   	// 数据发送缓冲区
uchar rbuf[8];   	// 数据接收缓冲区
bit   nackFlag;   	// 非应答标志位

//*******************************************************************
//晶振12MHz,延时1ms * t
//*******************************************************************

void delay_ms(uint t)
	{  
		uint i,j;
    	for(i=0;i<t;i++)
		for(j=0;j<125;j++)	//延时125x8us=1ms
		{;}
	}

//*******************************************************************
//延时微秒，对于12M时钟
//*******************************************************************/

void delay_us(uint us)
    {
        while(us--);
    }

//*******************************************************************
//暂停子函数
//*******************************************************************

void Int1(void) interrupt 2 using 1
	{	
		delay_ms(500);
		do{}
		while(INT_1 == 1);
		delay_ms(500);
	}

/********************************************************************
起动总线函数               
函数原型: void start(void);  
功能:启动I2C总线,即发送I2C起始条件.
*********************************************************************/

void start(void)
	{
		SDA = 1;			// 启动I2C总线
		SCL = 1;
		delay_us(5);
		SDA = 0;
		delay_us(5);
		SCL = 0;
	}

/********************************************************************
结束总线函数               
函数原型: void stop(void);
功能:结束I2C总线,即发送I2C结束条件  
*********************************************************************/

void stop(void)
	{
		SDA = 0;			// 停止I2C总线数据传送
		SCL = 1;
		delay_us(5);
		SDA = 1;
		delay_us(5);
		SCL = 0;
	}

/********************************************************************
应答子函数
原型: void ack(void);
功能:主控器进行应答信号
********************************************************************/

void ack(void)
	{
		SDA = 0;			// 发送应答位
		SCL = 1;
		delay_us(5);
		SCL = 0;
		SDA = 1;
	}

/********************************************************************
非应答子函数
原型: void n_ack(void);
功能:主控器进行非应答信号
********************************************************************/

void n_ack(void)
	{
		SDA = 1;			// 发送非应答位
		SCL = 1;
		delay_us(5);
		SCL = 0;
		SDA = 0;
	}

/********************************************************************
应答位检查子函数
原型: void check_ack(void);
功能:应答位检查
********************************************************************/

void check_ack(void)
	{ 
		SDA = 1;    		// 应答位检查（将p1.0设置成输入，必须先向端口写1）
		SCL = 1;
		nackFlag = 0;
		if(SDA == 1)    	// 若SDA=1表明非应答，置位非应答标志F0
			nackFlag = 1;
		SCL = 0;
	}

/*******************************************************************
字节数据传送函数               
函数原型: void  sendbyte(uchar dat);
功能:将数据dat发送出去,可以是地址,也可以是数据,发完后等待应答,并对此状
态位进行操作(不应答或非应答都使nackFlag = 1 假) 。发送数据正常，nackFlag = 0 
nackFlag = 1表示被控器无应答或损坏。
********************************************************************/

void sendbyte(uchar dat)
	{ 
		uchar BitCnt;
	 
 		for(BitCnt=0;BitCnt<8;BitCnt++)  /*要传送的数据长度为8位*/
    	{
     		if((dat<<BitCnt)&0x80)SDA=1;   /*判断发送位*/
       		else  SDA=0;                
     		SCL=1;               /*置时钟线为高，通知被控器开始接收数据位*/
     		//delay_us(5);//为了刷屏快延时可以不加
			SCL=0; 
   		} 
		check_ack();    			// 检查应答位
	}

/********************************************************************
字节数据传送函数               
函数原型: void sendnbyte(uchar *str)
功能:给定从地址，发送n字节数据子程序  
*********************************************************************/ 

void sendnbyte(uchar *str)
	{          
		start();				// 发送启动信号
		sendbyte(0x7a);    		// 发送从器件地址字节
	
		while (*str != '\0')      //连续写入字符串数据，直到检测到结束符
		{
			sendbyte(*str++);
		}
		stop();    			// 全部发完则停止
	}

/********************************************************************
字节数据传送函数               
函数原型: uchar recbyte(void)
功能:用来接收从器件传来的数据,发应答信号  
*********************************************************************/ 

uchar recbyte(void)
	{
		uchar n=8;    // 从SDA线上读取一位数据字节，共8位
		uchar temp = 0;
		
		while(n--)
		{
			SDA = 1;
			SCL = 1;
			temp = temp<<1;    // 左移一位
	     	if(SDA==1) temp=temp+1; /*读数据位,接收的数据位放入retc中 */
	     	SCL=0;
		}
		return(temp);
	}

/********************************************************************
字节数据传送函数               
函数原型: uchar recbyte(void)
功能:用来接收从器件传来的n个字节数据,发应答信号  
*********************************************************************/ 

void recnbyte(uchar n)
	{ 
		uchar i=0;
		
		start();			// 发送启动信号
		sendbyte(0x7b);		// 发送从器件地址字节
		recbyte();			//空读UC1638要求
		ack();				//发送应答信号
		for(i=0;i<n-1;i++)
		{ 
			rbuf[i]=recbyte();
			ack();    		// 收到一个字节后发送一个应答位
		}
		rbuf[i]=recbyte();
		n_ack();    		// 收到最后一个字节后发送一个非应答位
		stop();
	}
	
//*******************************************************************
//写指令
//*******************************************************************

void lcd_cmdwrite(uchar cmdx)
	{	
		start();
		sendbyte(0x78);	//从地址
		sendbyte(cmdx);	
		stop();	
   	}

//*******************************************************************
//写数据
//*******************************************************************

void lcd_datawrite(uchar datax)
	{	
		start();
		sendbyte(0x7A);	//从地址
		sendbyte(datax);	
		stop();     
	}

//*******************************************************************
//set cursor address
//*******************************************************************

void setcursor(uchar x,uchar y)
	{  	
   		uchar xh,xl;
    	
		xh=x/16;
	    xl=x%16;
		lcd_cmdwrite(0x04);//SET COLUMN ADDRESS
    	lcd_datawrite(y+240-dot_y);
        lcd_cmdwrite(0x70+xh);//SET PAGE ADDRESS
        lcd_cmdwrite(0x60+xl);
        lcd_cmdwrite(0x01); //WRITE DATA TO DISPLAY MEMORY
	}

//*******************************************************************
//清屏，全屏幕清零		
//*******************************************************************

void clr_screen(void)
	{
		uchar x,y;						
						
  		setcursor(0,0);		// set cursor
		lcd_cmdwrite(0x01); //WRITE DATA TO DISPLAY MEMORY
		start();
		sendbyte(0x7A);	//从地址
		for(x=0;x<dot_x;x++)		// write all page
		{
			for(y=0;y<dot_y;y++) 	// write all column
			sendbyte(0x00);// write display data 0x00
		}
		stop();
	}
    
//*******************************************************************
//写显示全屏		
//*******************************************************************

void display(uchar data1,uchar data2)
    {
    	uchar x,y;		
        
		setcursor(0,0);
		lcd_cmdwrite(0x01); //WRITE DATA TO DISPLAY MEMORY
		start();
		sendbyte(0x7A);	//从地址
		for(x=0;x<dot_x;x++)
    	{
    		for(y=0;y<dot_y/2;y++)
    		{  
    			sendbyte(data1);
    			sendbyte(data2);
    		}
    	}
		stop();
        delay_ms(1000);
    }

//*******************************************************************/
//显示边框子函数
//*******************************************************************

uchar code squ_96[]={0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80};

void dis_square(uchar *squ_tab)
	{
		uchar x,y;

		//clr_screen();
		setcursor(0,0);
		lcd_cmdwrite(0x01); //WRITE DATA TO DISPLAY MEMORY
		start();
		sendbyte(0x7A);	//从地址
		for (x=0;x<dot_x;x++)
		{
			sendbyte(0xFF);					
			for(y=0;y<dot_y-2;y++)	
			sendbyte(squ_tab[x]);
			sendbyte(0xFF);			
		}
		stop();	
	}

//*******************************************************************
//   字符点阵码数据输出			
//*******************************************************************

void one_word(uchar x,uchar y,uchar *Lib,uchar ch_num,uchar widthw)
	{
		uint i,j,ch_x,ch_y,row,col;
		int xi;								//偏移量，字符量少的可以定义为Uchar	
		
		row=x;col=y;
		xi=ch_num * widthw;					//每个字符取模的首地址	
		if (widthw==8)					    
		{ch_x=1;ch_y=8;}					//8X8字符包含的行,列数
		else {ch_x=2; ch_y=widthw>>1;}	    //8X16字符或汉字包含的行,列数
		for(i=0;i<ch_x;i++)				    //写ch_x行
		{
			setcursor(row,col);
			lcd_cmdwrite(0x01); //WRITE DATA TO DISPLAY MEMORY
			start();
			sendbyte(0x7A);	//从地址
			for(j=0;j<ch_y;j++)			    //写ch_y列
			{   
				sendbyte(Lib[xi]);			//写输出一字节		
				xi++;
				if (col>=dot_y){col=y;row+=ch_x;}	//下一列，如果列越界换行
				if (row>=dot_x) row=x;	//如果行越界，返回首行	
			}								//上半个字符输出结束	
			stop();
			row=x+1;						//指向下半个字符行
			col=y;	
		}
	}								

//*******************************************************************
//	一个字串的输出			
//*******************************************************************

void dis_word(uchar x,uchar y,uchar *str,uchar ch8_16)
	{
		uint row,col,ch_x,ch_y;		  				//定义局部变量
						    			
		row=x;col=y;
		while(*str!=0x00)								//写字符遇到'\0'结束
		{
			if (*str&0x80)		      					//判断
			{
				ch_y=16;				  				//字符包含的列数
				ch_x=2;				  					//字符包含的行数						   
				one_word(row,col,hz_tab,*str&0x7f,32);	//只保留低7位，写一个汉字	
			}
			else if(ch8_16==0)		  					//ch8_16==0 8X8字符/ ch8_16==1 8X16字符
			{
				ch_y=8;		   	  						//字符包含的列数
				ch_x=1;		      						//字符包含的行数
				one_word(row,col,ASC_8,*str-0x20,8);	//ascii码表从0x20开始
			}
			else
			{
				ch_y=8;		  	 						//字符包含的列数
				ch_x=2;		   	 						//字符包含的行数
			 	one_word(row,col,ASC_16,*str-0x20,16);	//ascii码表从0x20开始
			}	
			col=col+ch_y;				     			//下一个字符列地址
			if (col>=dot_y){col=y;row+=ch_x;}			//如果列越界换行
			if (row>=dot_x) row=x;		 			//如果行越界，返回首行	
			str++;	
		}  
	}

//*******************************************************************/ 
//对比度设置			
//*******************************************************************

void set_contrast(uchar flag)
	{
		switch(flag)
		{
			case 1: 
				lcd_datawrite(93); break;	//VOP	    P7,6,5=111 
			case 2: 
				lcd_datawrite(107); break;   //VOP+0.3V  P7,6,5=110
			case 3: 
				lcd_datawrite(122); break;   //VOP+0.6V  P7,6,5=101
			case 4: 
				lcd_datawrite(78); break;   //VOP-0.3V  P7,6,5=011
			case 5: 
				lcd_datawrite(64); break;   //VOP-0.6V  P7,6,5=010
		}
	}

//*******************************************************************/ 
//液晶屏初始化			
//*******************************************************************

void lcd_init(void)					    
	{
	   	lcd_cmdwrite(0x24);   	//SET TEMPERATURE COMPENSATION

		lcd_cmdwrite(0xc4);    //set LCD mapping control
		lcd_cmdwrite(0xf4);    //SET WINDOW PROGRAM STARTING COLUMN ADDRESS
        lcd_datawrite(240-dot_y);
        lcd_cmdwrite(0xf5);    //SET WINDOW PROGRAM STARTING PAGE ADDRESS
        lcd_datawrite(20-dot_x);
        lcd_cmdwrite(0xf6);    //SET WINDOW PROGRAM ENDING COLUMN ADDRESS
        lcd_datawrite(239);
        lcd_cmdwrite(0xf7);    //SET WINDOW PROGRAM ENDING PAGE ADDRESS
        lcd_datawrite(19);
		lcd_cmdwrite(0xf9);    //SET WINDOW PROGRAM ENABLE
							 
    	lcd_cmdwrite(0xa2);    	//SET LINE RATE 
        
        lcd_cmdwrite(0x2d); 	//set pump control internal Vlcd(x10 pump)
        lcd_cmdwrite(0xea);    	//set lcd bias:0xea是1/11Bias
        
		lcd_cmdwrite(0x81);    	//SET VBIAS POTENTIOMETER
        set_contrast(1);    // contrast value

    	lcd_cmdwrite(0x89);    	//SET RAM ADDRESS CONTROL 
    	lcd_cmdwrite(0x86);	  	//SET COM SCAN FUNCTION 0X86隔行 or 0X87逐行

        lcd_cmdwrite(0x85);    	//SET PARTIAL DISPLAY CONTROL
        lcd_cmdwrite(0xf1);    	//SET COM END
        lcd_datawrite(159);
        lcd_cmdwrite(0xf2);    	//SET PARTIAL DISPLAY START
        lcd_datawrite(64);
        lcd_cmdwrite(0xf3);    	//SET PARTIAL DISPLAY END
        lcd_datawrite(159);

        lcd_cmdwrite(0x95);    	//SET DISPLAY MODE set DC5=0 DC4=1 1 bits per pixel 
    	lcd_cmdwrite(0xc9);	  	//dispaly on
        lcd_datawrite(0xad);
	}

//*******************************************************************
//主程序
//*******************************************************************

void main(void)						    
	{
		P0=P1=P2=0xFF;
		
		EA  = 1;     //enable interrupter			    
		EX1 = 1;     //enable int1
		IT1 = 0;	 //int1 active low level
					
		dot_y=192; dot_x=12;
		
		delay_ms(3);	//延时3ms
		LCD_RST = 0;	//复位
		delay_ms(10);	//延时10ms	
		LCD_RST = 1;
		delay_ms(150);	//延时150ms
		
		lcd_init();						//初始化LCD

		while(1)
		{ 		
            display(0x00,0x00);
            dis_square(squ_96);
            dis_word(4,40,STR_19296_4,0);
			dis_word(6,40,STR_19296_5,0);
			delay_ms(1000);
			clr_screen();
			dis_word(0,0,STR_19296_6,0);
			delay_ms(1000);
			clr_screen();
			dis_word(4,32,STR_19296_2,1);
			dis_word(7,20,STR_19296_3,0);
			delay_ms(1000);
			lcd_cmdwrite(0xA7);
			delay_ms(1000);
			lcd_cmdwrite(0xA6);
		}
	}

//*******************************************************************
//定义字符串数组		
//*******************************************************************

uchar code STR_19296_1[]={0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x00};
uchar code STR_19296_2[]={0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x00};
uchar code STR_19296_3[]=	"GRAPHIC DISPLAY LCM";			
uchar code STR_19296_4[]=	" 192X96 DOTS  ";
uchar code STR_19296_5[]=	"GRAPHIC MODULE";
uchar code STR_19296_6[]=	"ABCDEFGHIJKLMNOPQRSTUVWX"
							"YZabcdefghijklmnopqrstuv"
							"wxyz0123456789ABCDEFGHIJ"
							"KLMNOPQRSTUVWXYZabcdefgh"
							"ijklmnopqrstuvwxyz012345"
                            "ABCDEFGHIJKLMNOPQRSTUVWX"
							"YZabcdefghijklmnopqrstuv"
							"wxyz0123456789ABCDEFGHIJ"
							"KLMNOPQRSTUVWXYZabcdefgh"
							"ijklmnopqrstuvwxyz012345"
							"ABCDEFGHIJKLMNOPQRSTUVWX"
							"YZabcdefghijklmnopqrstuv";
			  
//*******************************************************************
//  定义中文字库		
//*******************************************************************

uchar code hz_tab[]={

	0x10,0x0C,0x14,0xD4,0x54,0x54,0x55,0x56,
	0x54,0x54,0x54,0xD4,0x14,0x0C,0x04,0x00,
	0x00,0x00,0xFC,0x55,0x55,0x55,0x55,0x7D,
	0x55,0x55,0x55,0x55,0xFC,0x00,0x00,0x00,	// 富
 
	0x40,0x20,0xD0,0x4C,0x43,0x44,0x48,0xD8,
	0x30,0x10,0x00,0xFC,0x00,0x00,0xFF,0x00,
	0x00,0x00,0x3F,0x40,0x40,0x42,0x44,0x43,
	0x78,0x00,0x00,0x07,0x20,0x40,0x3F,0x00,	// 创

	0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,
	0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,
	0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,
	0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,	// 电
					 
	0x00,0x00,0x02,0x02,0x02,0x02,0x02,0xE2,
	0x12,0x0A,0x06,0x02,0x00,0x80,0x00,0x00,
	0x01,0x01,0x01,0x01,0x01,0x41,0x81,0x7F,
	0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,	// 子
					 
	0x00,0x04,0x84,0x44,0xE4,0x34,0x2C,0x27,
	0x24,0x24,0x24,0xE4,0x04,0x04,0x04,0x00,
	0x02,0x01,0x00,0x00,0xFF,0x09,0x09,0x09,
	0x29,0x49,0xC9,0x7F,0x00,0x00,0x00,0x00,	// 有
							 
	0xFE,0x02,0x32,0x4E,0x82,0x00,0xFE,0x4A,
	0xCA,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00,
	0xFF,0x00,0x02,0x04,0x03,0x00,0xFF,0x40,
	0x20,0x03,0x0C,0x12,0x21,0x60,0x20,0x00,	// 限 
			 
	0x00,0x00,0x80,0x40,0x30,0x0E,0x84,0x00,
	0x00,0x0E,0x10,0x60,0xC0,0x80,0x80,0x00,
	0x00,0x01,0x20,0x70,0x28,0x24,0x23,0x31,
	0x10,0x10,0x14,0x78,0x30,0x01,0x00,0x00,	// 公
	  
	0x00,0x10,0x92,0x92,0x92,0x92,0x92,0x92,
	0x92,0x92,0x12,0x02,0x02,0xFE,0x00,0x00,
	0x00,0x00,0x1F,0x04,0x04,0x04,0x04,0x04,
	0x04,0x0F,0x00,0x20,0x40,0x3F,0x00,0x00,	// 司

	0x00,0xFE,0x42,0x42,0x22,0x1E,0xAA,0x4A,	 
	0xAA,0x9A,0x0A,0x02,0x02,0xFE,0x00,0x00,
	0x00,0xFF,0x42,0x42,0x41,0x41,0x48,0x72,
	0x54,0x40,0x41,0x43,0x41,0xFF,0x00,0x00,	// 图

	0x40,0x42,0x42,0xFE,0x42,0x42,0xFE,0x42,	
	0x42,0x40,0x10,0x88,0xE4,0x47,0x02,0x00,
	0x80,0x40,0x30,0x0F,0x00,0x00,0x7F,0x00,
	0x84,0x42,0x21,0x10,0x08,0x0E,0x04,0x00,	// 形

	0x10,0x61,0x06,0xE0,0x18,0x84,0xE4,0x1C,	
	0x84,0x65,0xBE,0x24,0xA4,0x64,0x04,0x00,
	0x04,0x04,0xFF,0x00,0x01,0x00,0xFF,0x41,	   
	0x21,0x12,0x0C,0x1B,0x61,0xC0,0x40,0x00,	// 液

	0x00,0x00,0x00,0x00,0x7E,0x2A,0x2A,0x2A,	
	0x2A,0x2A,0x2A,0x7E,0x00,0x00,0x00,0x00,
	0x00,0x7F,0x25,0x25,0x25,0x25,0x7F,0x00,
	0x00,0x7F,0x25,0x25,0x25,0x25,0x7F,0x00,	// 晶

	0x00,0x00,0x00,0x3E,0x2A,0xEA,0x2A,0x2A,	
	0x2A,0xEA,0x2A,0x3E,0x00,0x00,0x00,0x00,
	0x20,0x21,0x22,0x2C,0x20,0x3F,0x20,0x20,
	0x20,0x3F,0x28,0x24,0x23,0x20,0x20,0x00,	// 显

	0x00,0x20,0x20,0x22,0x22,0x22,0x22,0xE2,	
	0x22,0x22,0x22,0x22,0x22,0x20,0x20,0x00,
	0x10,0x08,0x04,0x03,0x00,0x40,0x80,0x7F,
	0x00,0x00,0x01,0x02,0x0C,0x18,0x00,0x00,	// 示

	0x10,0xD0,0xFF,0x50,0x90,0x04,0xF4,0x54,	
	0x5F,0x54,0x54,0x5F,0xF4,0x04,0x00,0x00,
	0x03,0x00,0xFF,0x00,0x00,0x84,0x85,0x45,
	0x35,0x0F,0x15,0x25,0x65,0xC4,0x44,0x00,	// 模

	0x10,0x10,0xFF,0x10,0x10,0x00,0x08,0x08,	
	0xFF,0x08,0x08,0x08,0xF8,0x00,0x00,0x00,
	0x08,0x18,0x0F,0x04,0x85,0x41,0x31,0x0D,
	0x03,0x05,0x09,0x11,0x31,0x61,0x21,0x00,	// 块

    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    0X00,0X00,0X00,0X00,0X00,0X00,0X00,0X00,
    
    0X80,0X80,0X80,0X80,0X80,0X80,0X80,0XFF,
    0XFF,0X80,0X80,0X80,0X80,0X80,0X80,0X80,
    0X01,0X01,0X01,0X01,0X01,0X01,0X01,0XFF,
    0XFF,0X01,0X01,0X01,0X01,0X01,0X01,0X01,   //+
};

//*******************************************************************
// 定义ASCII字库8列*8行		
//*******************************************************************

uchar code ASC_8[]={

	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 	//" "=20H
    0x00,0x06,0x5F,0x5F,0x06,0x00,0x00,0x00, 	//"!"=21H
    0x00,0x00,0x07,0x00,0x07,0x00,0x00,0x00, 	//"""=22H 
	0x00,0x14,0x7f,0x14,0x7f,0x14,0x00,0x00, 	//"#"=23H 
	0x00,0x24,0x2a,0x7f,0x2a,0x12,0x00,0x00,	//"$"=24H 
	0x00,0x23,0x13,0x08,0x64,0x62,0x00,0x00, 	//"%"=25H 
	0x00,0x36,0x49,0x55,0x22,0x50,0x00,0x00, 	//"&"=26H 
	0x00,0x00,0x05,0x03,0x00,0x00,0x00,0x00, 	//"'"=27H
    0x00,0x1C,0x3E,0x63,0x41,0x00,0x00,0x00, 	//"("=28H
	0x00,0x41,0x63,0x3E,0x1C,0x00,0x00,0x00, 	//")"=29H
	0x00,0x14,0x08,0x3e,0x08,0x14,0x00,0x00, 	//"*"=2AH 
	0x00,0x08,0x08,0x3e,0x08,0x08,0x00,0x00, 	//"+"=2BH 
    0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x00, 	//","=2CH
    0x1C,0x1C,0x1C,0x1C,0x1C,0x1C,0x1C,0x00,	//"-"=2DH
    0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x00,	//"."=2EH
    0x00,0x20,0x10,0x08,0x04,0x02,0x00,0x00, 	//"/"=2FH
    0x3E,0x7F,0x71,0x59,0x4D,0x7F,0x3E,0x00,    //"0"=30H
    0x00,0x42,0x7F,0x7F,0x40,0x00,0x00,0x00,	//"1"=31H
    0x62,0x73,0x59,0x49,0x4F,0x46,0x00,0x00,	//"2"=32H
    0x22,0x63,0x49,0x49,0x7F,0x36,0x00,0x00,	//"3"=33H 
    0x1C,0x1E,0x13,0x51,0x7F,0x7F,0x50,0x00,	//"4"=34H 
    0x27,0x67,0x45,0x45,0x7D,0x39,0x00,0x00,	//"5"=35H
    0x3C,0x7E,0x4B,0x49,0x79,0x30,0x00,0x00,	//"6"=36H
    0x03,0x03,0x71,0x79,0x0F,0x07,0x00,0x00,	//"7"=37H 
    0x36,0x7F,0x49,0x49,0x7F,0x36,0x00,0x00,	//"8"=38H
    0x26,0x6F,0x49,0x49,0x7F,0x3E,0x00,0x00,	//"9"=39H
    0x00,0x00,0x66,0x66,0x00,0x00,0x00,0x00,	//":"=3AH
    0x00,0x00,0x56,0x36,0x00,0x00,0x00,0x00, 	//";"=3BH         
	0x00,0x08,0x14,0x22,0x41,0x00,0x00,0x00, 	//"<"=3CH         
	0x00,0x14,0x14,0x14,0x14,0x14,0x00,0x00, 	//"="=3DH        
	0x00,0x00,0x41,0x22,0x14,0x08,0x00,0x00, 	//">"=3EH        
	0x00,0x02,0x01,0x51,0x09,0x06,0x00,0x00, 	//"?"=3FH        
	0x00,0x32,0x49,0x79,0x41,0x3e,0x00,0x00, 	//"@"=40H      
    0x7C,0x7E,0x13,0x13,0x7E,0x7C,0x00,0x00,	//"A"=41H 
    0x41,0x7F,0x7F,0x49,0x49,0x7F,0x36,0x00,	//"B"=42H
    0x1C,0x3E,0x63,0x41,0x41,0x63,0x22,0x00,	//"C"=43H 
    0x41,0x7F,0x7F,0x41,0x63,0x3E,0x1C,0x00,	//"D"=44H
    0x41,0x7F,0x7F,0x49,0x49,0x63,0x63,0x00,	//"E"=45H 
    0x41,0x7F,0x7F,0x49,0x1D,0x01,0x03,0x00,	//"F"=46H
    0x1C,0x3E,0x63,0x41,0x51,0x73,0x72,0x00,	//"G"=47H
    0x7F,0x7F,0x08,0x08,0x7F,0x7F,0x00,0x00,	//"H"=48H
    0x00,0x41,0x7F,0x7F,0x41,0x00,0x00,0x00,	//"I"=49H
    0x61,0x41,0x41,0x7F,0x7F,0x01,0x00,0x00,	//"J"=4AH
    0x7F,0x7F,0x1C,0x36,0x63,0x41,0x00,0x00,	//"K"=4BH
    0x41,0x7F,0x7F,0x41,0x40,0x60,0x70,0x00,	//"L"=4CH
    0x7F,0x7F,0x06,0x1C,0x06,0x7F,0x7F,0x00,	//"M"=4DH
    0x7F,0x7F,0x06,0x0C,0x18,0x7F,0x7F,0x00,	//"N"=4EH
    0x1C,0x3E,0x63,0x41,0x63,0x3E,0x1C,0x00,	//"O"=4FH
    0x41,0x7F,0x7F,0x09,0x09,0x0F,0x06,0x00,	//"P"=50H
    0x1C,0x7E,0x63,0x51,0x63,0x3E,0x5C,0x00,	//"Q"=51H
    0x41,0x7F,0x7F,0x09,0x19,0x7F,0x66,0x00,	//"R"=52H 
    0x26,0x6F,0x4D,0x59,0x73,0x32,0x00,0x00,	//"S"=53H
    0x03,0x41,0x7F,0x7F,0x41,0x03,0x00,0x00,	//"T"=54H 
    0x7F,0x7F,0x40,0x40,0x7F,0x7F,0x00,0x00,	//"U"=55H
    0x07,0x1F,0x78,0x40,0x78,0x1F,0x07,0x00,	//"V"=56H
    0x7F,0x7F,0x30,0x1C,0x30,0x7F,0x7F,0x00,	//"W"=57H
    0x41,0x63,0x3E,0x08,0x3E,0x63,0x41,0x00,	//"X"=58H
    0x07,0x4F,0x78,0x78,0x4F,0x07,0x00,0x00,	//"Y"=59H 
    0x43,0x61,0x71,0x59,0x4D,0x47,0x63,0x00,	//"Z"=5AH 
	0x00,0x00,0x7f,0x41,0x41,0x00,0x00,0x00, 	//"["=5BH 
	0x00,0x02,0x04,0x08,0x10,0x20,0x00,0x00, 	//"\"=5CH 
	0x00,0x00,0x41,0x41,0x7f,0x00,0x00,0x00, 	//"]"=5DH 
	0x00,0x04,0x02,0x01,0x02,0x04,0x00,0x00, 	//"^"=5EH 
	0x00,0x40,0x40,0x40,0x40,0x40,0x00,0x00, 	//"_"=5FH 
	0x00,0x01,0x02,0x04,0x00,0x00,0x00,0x00, 	//"`"=60H       
    0x20,0x54,0x54,0x54,0x38,0x78,0x40,0x00,	//"a"=61H
    0x7F,0x7F,0x48,0x44,0x44,0x7C,0x38,0x00,	//"b"=62H
    0x38,0x7C,0x44,0x44,0x6C,0x28,0x00,0x00,	//"c"=63H
    0x30,0x78,0x48,0x49,0x3F,0x7F,0x40,0x00,	//"d"=64H
    0x38,0x7C,0x54,0x54,0x5C,0x18,0x00,0x00,	//"e"=65H
    0x48,0x7E,0x7F,0x49,0x03,0x02,0x00,0x00,	//"f"=66H
    0x98,0xBC,0xA4,0xA4,0xF8,0x7C,0x04,0x00,	//"g"=67H
    0x41,0x7F,0x7F,0x08,0x04,0x7C,0x78,0x00,	//"h"=68H
    0x00,0x44,0x7D,0x7D,0x40,0x00,0x00,0x00,	//"i"=69H
    0x20,0x60,0x40,0x44,0x7D,0x3D,0x00,0x00,	//"j"=6AH 
    0x41,0x7F,0x7F,0x10,0x38,0x6C,0x44,0x00,	//"k"=6BH
    0x00,0x41,0x7F,0x7F,0x40,0x00,0x00,0x00,	//"l"=6CH
    0x7C,0x7C,0x18,0x38,0x18,0x7C,0x7C,0x00,	//"m"=6DH
    0x7C,0x7C,0x04,0x04,0x7C,0x78,0x00,0x00,	//"n"=6EH
    0x38,0x7C,0x44,0x44,0x7C,0x38,0x00,0x00,	//"o"=6FH
    0x84,0xFC,0xF8,0xA4,0x24,0x3C,0x18,0x00,	//"p"=70H
    0x0C,0x1E,0x1E,0x92,0xFE,0xFE,0x92,0x00,	//"q"=71H
    0x44,0x7C,0x78,0x4C,0x04,0x1C,0x18,0x00,	//"r"=72H
    0x48,0x5C,0x54,0x54,0x74,0x24,0x00,0x00,	//"s"=73H
    0x00,0x04,0x3E,0x7F,0x44,0x24,0x00,0x00,	//"t"=74H
    0x3C,0x7C,0x40,0x40,0x3C,0x7C,0x40,0x00,	//"u"=75H
    0x1C,0x3C,0x60,0x60,0x3C,0x1C,0x00,0x00,	//"v"=76H
    0x3C,0x7C,0x70,0x38,0x70,0x7C,0x3C,0x00,	//"w"=77H
    0x44,0x6C,0x38,0x10,0x38,0x6C,0x44,0x00,	//"x"=78H
    0x9C,0xBC,0xA0,0xA0,0xFC,0x7C,0x00,0x00,	//"y"=79H
    0x44,0x64,0x74,0x5C,0x4C,0x44,0x00,0x00,	//"z"=7AH
	0x00,0x00,0x08,0x36,0x41,0x00,0x00,0x00, 	//"{"=7BH 
	0x00,0x00,0x00,0x77,0x00,0x00,0x00,0x00, 	//"|"=7CH 
	0x00,0x00,0x41,0x36,0x08,0x00,0x00,0x00, 	//"}"=7DH 
	0x00,0x02,0x01,0x02,0x04,0x02,0x00,0x00, 	//"~"=7EH 
	0x00,0xff,0xff,0xff,0xff,0xff,0x00,0x00 	//" "=7FH 
};										   

//*******************************************************************
// 定义ASCII字库8列*16行		
//*******************************************************************

uchar code ASC_16[]={

	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//" "=20H
	0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x27,0x00,0x00,0x00,0x00,	//"!"=21H
	0x00,0x08,0x04,0x02,0x08,0x04,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//"""=22H
	0x40,0x40,0xF8,0x40,0x40,0xF8,0x40,0x00,
	0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,	//"#"=23H 
	0x00,0x70,0x88,0xFC,0x08,0x08,0x30,0x00,
	0x00,0x1C,0x20,0xFF,0x21,0x22,0x1C,0x00,	//"$"=24H 
	0xF0,0x08,0xF0,0x80,0x70,0x08,0x00,0x00,
	0x00,0x31,0x0E,0x01,0x1E,0x21,0x1E,0x00,	//"%"=25H 
	0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
	0x1E,0x21,0x23,0x24,0x18,0x16,0x20,0x00,	//"&"=26H 
	0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//"'"=27H 
	0x00,0x00,0x00,0x00,0xC0,0x30,0x08,0x04,
	0x00,0x00,0x00,0x00,0x03,0x0C,0x10,0x20,	//"("=28H 
	0x04,0x08,0x30,0xC0,0x00,0x00,0x00,0x00,
	0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,	//")"=29H 
	0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
	0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,	//"*"=2AH 
	0x00,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,
	0x01,0x01,0x01,0x0F,0x01,0x01,0x01,0x00,	//"+"=2BH 
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x80,0x60,0x00,0x00,0x00,0x00,0x00,0x00,	//","=2CH 
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00,	//"-"=2DH 
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,	//"."=2EH 
	0x00,0x00,0x00,0x00,0x00,0xE0,0x18,0x04,
	0x00,0x40,0x30,0x0C,0x03,0x00,0x00,0x00,	//"/"=2FH 
	0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
	0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,	//"0"=30H 
	0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
	0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,	//"1"=31H 
	0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
	0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,	//"2"=32H
	0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
	0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,	//"3"=33H 
	0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
	0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,	//"4"=34H
	0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
	0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,	//"5"=35H 
	0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
	0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,	//"6"=36H 
	0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"7"=37H 
	0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
	0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,	//"8"=38H 
	0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
	0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,	//"9"=39H 
	0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,
	0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,	//":"=3AH 
	0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,	//";"=3BH 
	0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
	0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,	//"<"=3CH 
	0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
	0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,	//"="=3DH 
	0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
	0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,	//">"=3EH 
	0x00,0x30,0x08,0x08,0x08,0x88,0x70,0x00,
	0x00,0x00,0x00,0x26,0x01,0x00,0x00,0x00,	//"?"=3FH 
	0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
	0x07,0x18,0x27,0x28,0x27,0x28,0x07,0x00,	//"@"=40H  
	0x00,0x00,0xE0,0x18,0x18,0xE0,0x00,0x00,
	0x30,0x0F,0x04,0x04,0x04,0x04,0x0F,0x30,	//"A"=41H 
	0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
	0x3F,0x21,0x21,0x21,0x21,0x12,0x0C,0x00,	//"B"=42H
	0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
	0x0F,0x10,0x20,0x20,0x20,0x10,0x0C,0x00,	//"C"=43H  
	0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
	0x3F,0x20,0x20,0x20,0x20,0x10,0x0F,0x00,	//"D"=44H 
	0x00,0xF8,0x08,0x08,0x08,0x08,0x08,0x00,
	0x00,0x3F,0x21,0x21,0x21,0x21,0x20,0x00,	//"E"=45H 
	0xF8,0x08,0x08,0x08,0x08,0x08,0x08,0x00,
	0x3F,0x01,0x01,0x01,0x01,0x01,0x00,0x00,	//"F"=46H 
	0xE0,0x10,0x08,0x08,0x08,0x10,0x60,0x00,
	0x0F,0x10,0x20,0x20,0x21,0x11,0x3F,0x00,	//"G"=47H 
	0x00,0xF8,0x00,0x00,0x00,0x00,0xF8,0x00,
	0x00,0x3F,0x01,0x01,0x01,0x01,0x3F,0x00,	//"H"=48H 
	0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"I"=49H 
	0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
	0x00,0x1C,0x20,0x20,0x20,0x20,0x1F,0x00,	//"J"=4AH 
	0x00,0xF8,0x00,0x80,0x40,0x20,0x10,0x08,
	0x00,0x3F,0x01,0x00,0x03,0x04,0x18,0x20,	//"K"=4BH 
	0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x3F,0x20,0x20,0x20,0x20,0x20,0x20,0x00,	//"L"=4CH 
	0xF8,0xE0,0x00,0x00,0x00,0xE0,0xF8,0x00,
	0x3F,0x00,0x0F,0x30,0x0F,0x00,0x3F,0x00,	//"M"=4DH 
	0x00,0xF8,0x30,0xC0,0x00,0x00,0xF8,0x00,
	0x00,0x3F,0x00,0x01,0x06,0x18,0x3F,0x00,	//"N"=4EH  
	0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
	0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,	//"O"=4FH 
	0xF8,0x08,0x08,0x08,0x08,0x10,0xE0,0x00,
	0x3F,0x02,0x02,0x02,0x02,0x01,0x00,0x00,	//"P"=50H  
	0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
	0x00,0x0F,0x10,0x20,0x2C,0x10,0x2F,0x00,	//"Q"=51H  
	0xF8,0x08,0x08,0x08,0x08,0x90,0x60,0x00,
	0x3F,0x01,0x01,0x01,0x07,0x18,0x20,0x00,	//"R"=52H 
	0x60,0x90,0x88,0x08,0x08,0x10,0x20,0x00,
	0x0C,0x10,0x20,0x21,0x21,0x12,0x0C,0x00,	//"S"=53H 
	0x08,0x08,0x08,0xF8,0x08,0x08,0x08,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"T"=54H 
	0xF8,0x00,0x00,0x00,0x00,0x00,0xF8,0x00,
	0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,	//"U"=55H 
	0x18,0xE0,0x00,0x00,0x00,0xE0,0x18,0x00,
	0x00,0x01,0x0E,0x30,0x0E,0x01,0x00,0x00,	//"V"=56H 
	0xF8,0x00,0xC0,0x38,0xC0,0x00,0xF8,0x00,
	0x03,0x3C,0x03,0x00,0x03,0x3C,0x03,0x00,	//"W"=57H  
	0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
	0x20,0x18,0x06,0x01,0x06,0x18,0x20,0x00,	//"X"=58H 
	0x08,0x30,0xC0,0x00,0xC0,0x30,0x08,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"Y"=59H 
	0x08,0x08,0x08,0x08,0xC8,0x28,0x18,0x00,
	0x30,0x2C,0x22,0x21,0x20,0x20,0x20,0x00,	//"Z"=5AH 
	0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,
	0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,	//"["=5BH
	0x00,0x08,0x70,0x80,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x0E,0x30,0xC0,0x00,	//"\"=5CH
	0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
	0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,	//"]"=5DH 
	0x00,0x08,0x04,0x02,0x02,0x04,0x08,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//"^"=5EH 
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,	//"_"=5FH 
	0x00,0x00,0x02,0x06,0x04,0x08,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//"`"=60H  
	0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
	0x00,0x19,0x24,0x24,0x24,0x14,0x3F,0x00,	//"a"=61H 
	0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
	0x00,0x3F,0x11,0x20,0x20,0x20,0x1F,0x00,	//"b"=62H 
	0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
	0x0E,0x11,0x20,0x20,0x20,0x20,0x11,0x00,	//"c"=63H 
	0x00,0x00,0x80,0x80,0x80,0x00,0xF8,0x00,
	0x00,0x1F,0x20,0x20,0x20,0x11,0x3F,0x00,	//"d"=64H 
	0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
	0x0E,0x15,0x24,0x24,0x24,0x25,0x16,0x00,	//"e"=65H 
	0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"f"=66H 
	0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
	0x40,0xB7,0xA8,0xA8,0xA8,0xA7,0x40,0x00,	//"g"=67H 
	0x00,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
	0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,	//"h"=68H 
	0x00,0x00,0x00,0x98,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"i"=69H 
	0x00,0x00,0x00,0x00,0x98,0x00,0x00,0x00,
	0x00,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,	//"j"=6AH 
	0x00,0xF8,0x00,0x00,0x00,0x80,0x00,0x00,
	0x00,0x3F,0x04,0x02,0x0D,0x10,0x20,0x00,	//"k"=6BH 
	0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,	//"l"=6CH 
	0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,
	0x3F,0x00,0x00,0x3F,0x00,0x00,0x3F,0x00,	//"m"=6DH 
	0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
	0x00,0x3F,0x01,0x00,0x00,0x00,0x3F,0x00,	//"n"=6EH 
	0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,
	0x0E,0x11,0x20,0x20,0x20,0x11,0x0E,0x00,	//"o"=6FH 
	0x00,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
	0x00,0xFF,0x11,0x20,0x20,0x20,0x1F,0x00,	//"p"=70H 
	0x00,0x00,0x80,0x80,0x80,0x00,0x80,0x00,
	0x00,0x1F,0x20,0x20,0x20,0x11,0xFF,0x00,	//"q"=71H 
	0x00,0x00,0x80,0x00,0x00,0x80,0x80,0x00,
	0x00,0x00,0x3F,0x01,0x01,0x00,0x00,0x00,	//"r"=72H 
	0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
	0x00,0x13,0x24,0x24,0x24,0x24,0x19,0x00,	//"s"=73H 
	0x00,0x80,0x80,0xE0,0x80,0x80,0x80,0x00,
	0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x00,	//"t"=74H 
	0x00,0x80,0x00,0x00,0x00,0x00,0x80,0x00,
	0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x00,	//"u"=75H 
	0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
	0x00,0x07,0x18,0x20,0x18,0x07,0x00,0x00,	//"v"=76H 
	0x80,0x00,0x00,0x80,0x00,0x00,0x80,0x00,
	0x0F,0x30,0x0E,0x01,0x0E,0x30,0x0F,0x00,	//"w"=77H 
	0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
	0x20,0x11,0x0A,0x04,0x0A,0x11,0x20,0x00,	//"x"=78H 
	0x80,0x00,0x00,0x00,0x00,0x00,0x80,0x00,
	0x00,0x87,0x98,0x60,0x18,0x07,0x00,0x00,	//"y"=79H   
	0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
	0x00,0x30,0x28,0x24,0x22,0x21,0x20,0x00,	//"z"=7AH  
	0x00,0x00,0x00,0x80,0x7E,0x02,0x00,0x00,
	0x00,0x00,0x00,0x00,0x3F,0x20,0x00,0x00,	//"{"=7BH 
	0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,	//"|"=7CH 
	0x00,0x02,0x7E,0x80,0x00,0x00,0x00,0x00,
	0x00,0x20,0x3F,0x00,0x00,0x00,0x00,0x00,	//"}"=7DH   
	0x00,0x06,0x01,0x01,0x06,0x04,0x03,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	//"~"=7EH
	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF		//" "=7FH 
}; 

//*******************************************************************
// 定义字库结束
//*******************************************************************