Toy RC QP via DEVX

This is a toy/example program that uses DEVX and creates an RC QP, connects it to itself (loopback) and preforms RDMA_WRITE and RDMA_READ.

Sample output

$ gcc main.c -o toy -libverbs -lmlx5
$ sudo ./toy mlx5_2
Summery:
IB device: mlx5_2
RC QPN: 0x1DF
CQN: 0x485
PDN: 0x15
UAR base address: 0x0x7fea4f5af000
UAR register address: 0x0x7fea4f5af800
SRC DGID/SGID: fe80::ee0d:9aff:fed4:2e14
SRC buffer rkey/lkey: 0x7F33
WRITE buffer rkey/lkey: 0x8333
READ buffer rkey/lkey: 0x8533

Before RDMA operations:
Source buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000
Write to buffer:
0000000000000000000000000000000000000000000000000000000000000000
Read to buffer:
0000000000000000000000000000000000000000000000000000000000000000

After RDMA_WRITE:
Source buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000
Write to buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000
Read to buffer:
0000000000000000000000000000000000000000000000000000000000000000

After RDMA_READ:
Source buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000
Write to buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000
Read to buffer:
deadbeef000000000000000000000000000000000000000000000000000000000000

We have three buffers at play:

• Source buffer
• Write to buffer
• Read to buffer

1. Source buffer is filled with 0xdeadbeef at the start of the program.
2. Preform RDMA_WRITE from source buffer to write to buffer.
3. Poll the CQ until we get a completion.
4. Preform RDMA_READ from write to buffer to read to buffer.
5. Poll the CQ until we get a completion.