Unstable reading. #2720
Replies: 2 comments 1 reply
-
Why are you 20cm away with the cam? Try to go as close as possible so you still have all digits in the picture. Turning backward (decreasing the value) is not a problem, but you must uncheck the neg. rate check. |
Beta Was this translation helpful? Give feedback.
-
Thanks for the reply! Digits are quite a way into the meter so the closer I get the more they're affected by the depth of the socket they're in and the off-perpendicular viewing angle. I could try to get closer for sure, though getting a semi pleasant lighting from the onboard LED was hard enough this far away with diffuser and reflector materials! I do have the neg rate unchecked 👍 |
Beta Was this translation helpful? Give feedback.
-
I'm having issues with my numeric values not being properly detected, I've done a ton to reduce reflection and get alignment correct but even with 0.1 resolution enabled, it skips up and down and loses track after a day. I think part of my problem is my meter seems to go the opposite way from what is expected when progressing normally, but it also does move backward when generating, but I'm losing the will to live at this stage. The black digits read out continuously, the red/white side digits are the decimals which I'd love to read but are too small and fuzzy even from 200mm away.
Beta Was this translation helpful? Give feedback.
All reactions