more features for exim, znc & proftpd #254
Comments
|
Done, these will be enabled in 2015Q1, thanks! |
|
It should be possible to split proftpd into separate packages (e.g. proftpd-mysql), at least such exists in Ubuntu. Otherwise we lock the user to a specific MySQL flavor/version once proftpd is installed. |
|
I opened TritonDataCenter/pkgsrc#257 for that, and yeh we should do that for others we've enabled where possible. |
jperkin
pushed a commit
that referenced
this issue
Apr 16, 2015
------ 14.3.1 ------ * Issue #307: Removed PEP-440 warning during parsing of versions in ``pkg_resources.Distribution``. * Issue #364: Replace deprecated usage with recommended usage of ``EntryPoint.load``. ---- 14.3 ---- * Issue #254: When creating temporary egg cache on Unix, use mode 755 for creating the directory to avoid the subsequent warning if the directory is group writable.
jperkin
pushed a commit
that referenced
this issue
May 22, 2015
Upstream changes: 1.2.0 2015-04-14 07:13:00+0000 - [core] bundle libyaml #248 (Kazuho Oku) - [core] implement master-worker process mode and daemon mode (bundles Server::Starter) #258 #270 (Kazuho Oku) - [file] more mime-types by default #250 #254 #280 (Tatsuhiko Kubo, George Liu, Kazuho Oku) - [file][http1] fix connection being closed if the length of content is zero #276 (Kazuho Oku) - [headers] fix heap overrun during configuration #251 (Kazuho Oku) - [http2] do not delay sending PUSH_PROMISE #221 (Kazuho Oku) - [http2] reduce memory footprint under high load #271 (Kazuho Oku) - [http2] fix incorrect error sent when number of streams exceed the limit #268 (Kazuho Oku) - [proxy] fix heap overrun when building request sent to upstream #266 #269 (Moto Ishizawa, Kazuho Oku) - [proxy] fix laggy response in case the length of content is zero #274 #276 (Kazuho Oku) - [SSL] fix potential stall while reading data from client #268 (Kazuho Oku) - [SSL] bundle LibreSSL #236 #272 (Kazuho Oku) - [SSL] obtain source-level compatibility with BoringSSL #228 (Kazuho Oku) - [SSL] add directive `listen.ssl.cipher-preference` for controlling the selection logic of cipher-suites #233 (Kazuho Oku) - [SSL] disable TLS compression #252 (bisho) - [libh2o] fix C++ compatibility (do not use empty struct) #225 (Kazuho Oku) - [libh2o] search external dependencies using pkg-config #227 (Kazuho Oku) - [misc] fix GCC version detection bug used for controlling compiler warnings #224 (Kazuho Oku) - [misc] check merory allocation failures in socket pool #265 (Tatsuhiko Kubo) 1.1.1 2015-03-09 06:12:00+0000 - [proxy] fix crash on NetBSD when upstream connection is persistent #217 (Kazuho Oku) - [misc] fix compile error on FreeBSD #211 #212 (Syohei Yoshida) 1.1.0 2015-03-06 06:41:00+0000 - [core][file] send redirects appending '/' as abs-path redirects #209 (Kazuho Oku) - [headers] add directives for manipulating response headers #204 (Kazuho Oku) - [http2] do not send a corrupt response if header value is longer than 126 bytes #193 (Kazuho Oku) - [http2] fix interoperability issue with nghttp2 0.7.5 and above 5c42eb1 (Kazuho Oku) - [proxy] send `via` header to upstream #191 (Kazuho Oku) - [proxy] resolve hostname asynchronously #207 (Kazuho Oku) - [proxy] distribute load between upstream servers (using `rand()`) #208 (Kazuho Oku) - [proxy] fix a bug that may cause a corrupt `location` header being forwarded #190 (Kazuho Oku) - [reproxy] add support for `x-reproxy-url` header #187 #197 (Daisuke Maki, Kazuho Oku) 1.0.1 2015-02-23 05:50:00+0000 - [core] change backlog size from 65,536 to 65,535 #183 (Tatsuhiko Kubo) - [http2] fix assertion failure in HPACK encoder #186 (Kazuho Oku) - [http2] add `extern` to some global variables that were not marked as such #178 (Kazuho Oku) - [proxy] close persistent upstream connection if client abruptly closes the stream #188 (Kazuho Oku) - [proxy] fix internal state corruption in case upstream sends response headers divided into multpile packets #189 (Kazuho Oku) - [SSL] add host header to OCSP request #176 (Masaaki Hirose) - [libh2o] do not require header files under `deps/` when using libh2o #173 (Kazuho Oku) - [libh2o] fix compile error in examples when compiled with `H2O_USE_LIBUV=0` #177 (Kazuho Oku) - [libh2o] in example, add missing / after the reference path #180 (Matthieu Garrigues) - [misc] fix invalid HTML in sample page #175 (Deepak Prakash) 1.0.0 2015-02-18 20:01:00+0000 - [core] add redirect handler #150 (Kazuho Oku) - [core] add `pid-file` directive for specifying the pid file #164 (Kazuho Oku) - [core] connections accepted by host-specific listeners should not be handled by handlers of other hosts #163 (Kazuho Oku) - [core] (FreeBSD) fix a bug that prevented the standalone server from booting when run as root #160 (Kazuho Oku) - [core] switch to pipe-based interthread messaging #154 (Kazuho Oku) - [core] use kqueue on all BSDs #156 (Kazuho Oku) - [access-log] more logging directives: %H, %m, %q, %U, %V, %v #158 (Kazuho Oku) - [access-log] bugfix: header values were not logged when specified using uppercase letters #157 (Kazuho Oku) - [file] add application/json to defalt MIME-types #159 (Tatsuhiko Kubo) - [http2] add support for the finalized version of HTTP/2 #166 (Kazuho Oku) - [http2] fix issues reported by h2spec v0.0.6 #165 (Kazuho Oku) - [proxy] merge the cookie headers before sending to upstream #161 (Kazuho Oku) - [proxy] simplify the configuration directives (and make persistent upstream connections as default) #162 (Kazuho Oku) - [SSL] add configuration directive to preload DH params #148 (Jeff Marrison) - [libh2o] separate versioning scheme using H2O_LIBRARY_VERSION_* #167 (Kazuho Oku) 0.9.2 2015-02-10 04:17:00+0000 - [core] graceful shutdown on SIGTERM #119 (Kazuho Oku) - [core] less TCP errors under high load #81 (Kazuho Oku) - [file] add support for HEAD requests #110 (Mark Hoersken) - [http1] MSIE workaround (send `Cache-Control: private` in place of Vary) #114 (Kazuho Oku) - [http2] support server-push #133 (Kazuho Oku) - [http2] fix spurious RST_STREAMS being sent #132 (Kazuho Oku) - [http2] weight-based distribution of bandwidth #135 (Kazuho Oku) - [proxy] added configuration directive `proxy.preserve-host` #112 (Masahiro Nagano) - [proxy] sends X-Forwarded-For and X-Forwarded-Proto headers #112 (Masahiro Nagano) - [proxy] stability improvements #61 (Kazuho Oku) - [misc] adjustments to make the source code more analyzer-friendly #113,#117 (Nick Desaulniers, Maks Naumov) 0.9.1 2015-01-19 21:13:00+0000 - added configuration directives: ssl/cipher-suite, ssl/ocsp-update-interval, ssl/ocsp-max-failures, expires, file.send-gzip - [http2] added support for draft-16 (draft-14 is also supported) - [http2] dependency-based prioritization - [http2] improved conformance to the specification - [SSL] OCSP stapling (automatically enabled by default) - [SSL] fix compile error with OpenSSL below version 1.0.1 - [file] content negotiation (serving .gz files) - [expires] added support for Cache-Control: max-age - [libh2o] libh2o and the header files installed by `make install` - [libh2o] fix compile error when used from C++ - automatically setuids to nobody when run as root and if `user` directive is not set - automatically raises RLIMIT_NOFILE - uses all CPU cores by default - now compiles on NetBSD and other BSD-based systems
jperkin
pushed a commit
that referenced
this issue
Aug 17, 2015
Due to a change in packaging the docs themes are currently excluded from the pypi distribution, breaking the -docs package. Issue ``#761`` should address this upstream; we'll being using GitHub as the master site for the time being. Version 0.10.4 -------------- (bugfix release, released on March 26th 2015) - Re-release of 0.10.3 with packaging artifacts manually removed. Version 0.10.3 -------------- (bugfix release, released on March 26th 2015) - Re-release of 0.10.2 without packaging artifacts. Version 0.10.2 -------------- (bugfix release, released on March 26th 2015) - Fixed issue where ``empty`` could break third-party libraries that relied on keyword arguments (pull request ``#675``) - Improved ``Rule.empty`` by providing a ```get_empty_kwargs`` to allow setting custom kwargs without having to override entire ``empty`` method. (pull request ``#675``) - Fixed ```extra_files``` parameter for reloader to not cause startup to crash when included in server params - Using `MultiDict` when building URLs is now not supported again. The behavior introduced several regressions. - Fix performance problems with stat-reloader (pull request ``#715``). Version 0.10.1 -------------- (bugfix release, released on February 3rd 2015) - Fixed regression with multiple query values for URLs (pull request ``#667``). - Fix issues with eventlet's monkeypatching and the builtin server (pull request ``#663``). Version 0.10 ------------ Released on January 30th 2015, codename Bagger. - Changed the error handling of and improved testsuite for the caches in ``contrib.cache``. - Fixed a bug on Python 3 when creating adhoc ssl contexts, due to `sys.maxint` not being defined. - Fixed a bug on Python 3, that caused :func:`~werkzeug.serving.make_ssl_devcert` to fail with an exception. - Added exceptions for 504 and 505. - Added support for ChromeOS detection. - Added UUID converter to the routing system. - Added message that explains how to quit the server. - Fixed a bug on Python 2, that caused ``len`` for :class:`werkzeug.datastructures.CombinedMultiDict` to crash. - Added support for stdlib pbkdf2 hmac if a compatible digest is found. - Ported testsuite to use ``py.test``. - Minor optimizations to various middlewares (pull requests ``#496`` and ``#571``). - Use stdlib ``ssl`` module instead of ``OpenSSL`` for the builtin server (issue ``#434``). This means that OpenSSL contexts are not supported anymore, but instead ``ssl.SSLContext`` from the stdlib. - Allow protocol-relative URLs when building external URLs. - Fixed Atom syndication to print time zone offset for tz-aware datetime objects (pull request ``#254``). - Improved reloader to track added files and to recover from broken sys.modules setups with syntax errors in packages. - ``cache.RedisCache`` now supports arbitrary ``**kwargs`` for the redis object. - ``werkzeug.test.Client`` now uses the original request method when resolving 307 redirects (pull request ``#556``). - ``werkzeug.datastructures.MIMEAccept`` now properly deals with mimetype parameters (pull request ``#205``). - ``werkzeug.datastructures.Accept`` now handles a quality of ``0`` as intolerable, as per RFC 2616 (pull request ``#536``). - ``werkzeug.urls.url_fix`` now properly encodes hostnames with ``idna`` encoding (issue ``#559``). It also doesn't crash on malformed URLs anymore (issue ``#582``). - ``werkzeug.routing.MapAdapter.match`` now recognizes the difference between the path ``/`` and an empty one (issue ``#360``). - The interactive debugger now tries to decode non-ascii filenames (issue ``#469``). - Increased default key size of generated SSL certificates to 1024 bits (issue ``#611``). - Added support for specifying a ``Response`` subclass to use when calling :func:`~werkzeug.utils.redirect`\ . - ``werkzeug.test.EnvironBuilder`` now doesn't use the request method anymore to guess the content type, and purely relies on the ``form``, ``files`` and ``input_stream`` properties (issue ``#620``). - Added Symbian to the user agent platform list. - Fixed make_conditional to respect automatically_set_content_length - Unset ``Content-Length`` when writing to response.stream (issue ``#451``) - ``wrappers.Request.method`` is now always uppercase, eliminating inconsistencies of the WSGI environment (issue ``647``). - ``routing.Rule.empty`` now works correctly with subclasses of ``Rule`` (pull request ``#645``). - Made map updating safe in light of concurrent updates. - Allow multiple values for the same field for url building (issue ``#658``). Version 0.9.7 ------------- (bugfix release, release date to be decided) - Fix unicode problems in ``werkzeug.debug.tbtools``. - Fix Python 3-compatibility problems in ``werkzeug.posixemulation``. - Backport fix of fatal typo for ``ImmutableList`` (issue ``#492``). - Make creation of the cache dir for ``FileSystemCache`` atomic (issue ``#468``). - Use native strings for memcached keys to work with Python 3 client (issue ``#539``). - Fix charset detection for ``werkzeug.debug.tbtools.Frame`` objects (issues ``#547`` and ``#532``). - Fix ``AttributeError`` masking in ``werkzeug.utils.import_string`` (issue ``#182``). - Explicitly shut down server (issue ``#519``). - Fix timeouts greater than 2592000 being misinterpreted as UNIX timestamps in ``werkzeug.contrib.cache.MemcachedCache`` (issue ``#533``). - Fix bug where ``werkzeug.exceptions.abort`` would raise an arbitrary subclass of the expected class (issue ``#422``). - Fix broken ``jsrouting`` (due to removal of ``werkzeug.templates``) - ``werkzeug.urls.url_fix`` now doesn't crash on malformed URLs anymore, but returns them unmodified. This is a cheap workaround for ``#582``, the proper fix is included in version 0.10. - The repr of ``werkzeug.wrappers.Request`` doesn't crash on non-ASCII-values anymore (pull request ``#466``). - Fix bug in ``cache.RedisCache`` when combined with ``redis.StrictRedis`` object (pull request ``#583``). - The ``qop`` parameter for ``WWW-Authenticate`` headers is now always quoted, as required by RFC 2617 (issue ``#633``). - Fix bug in ``werkzeug.contrib.cache.SimpleCache`` with Python 3 where add/set may throw an exception when pruning old entries from the cache (pull request ``#651``).
jperkin
pushed a commit
that referenced
this issue
Sep 18, 2015
kramdown 1.8.0 released This release contains only some minor updates and bug fixes. Changes * 4 minor changes: - The LaTeX converter now uses \texttt instead of \tt for code spans (fixes #257, reported by richard101696) - New option footnote_backlink for changing the backlink of footnotes in the HTML converter (fixes #247, requested by Benjamin Esham) - A quote directly followed by an ellipsis is now converted into an opening quotation mark (fixes #253, requested by Michael Franzl) - Removed warning for self-closing HTML elements that are not self-closed (fixes #262, requested by Gregory Pakosz) * 3 bug fixes: - Fixed #251: The special character sequence \` now works correctly when used in footnotes or headers that appear in the table of contents (reported by Peter Kehl) - Fixed #254: kramdown crashed on encountering a table with multiple consecutive separator lines (reported by Christian Kruse) - Fixed #256: Certain footnote definitions and codeblocks lead to crashes or unneeded backtracking in the regular expression engine - fixed by using atomic grouping (reported by Ali Ok)
jperkin
pushed a commit
that referenced
this issue
Oct 5, 2015
## 0.9.8 (2015-09-29) * [#260](httprb/http#258): Fixed global timeout persisting time left across requests when reusing connections. ([@zanker][]) ## 0.9.7 (2015-09-19) * [#258](httprb/http#258): Unified strategy for handling exception-based and exceptionless non-blocking I/O. Fixes SSL support on JRuby 9000. ([@tarcieri][]) ## 0.9.6 (2015-09-06) * [#254](httprb/http#254): Removed use of an ActiveSupport specific method #present? ([@tarcieri][]) ## 0.9.5 (2015-09-06) * [#252](httprb/http#252): Fixed infinite hang/timeout when a request contained more than ~16,363 bytes. ([@zanker][]) ## 0.9.4 (2015-08-26) * Fixes regression when body streaming was failing on some URIs. See #246. (@zanker) * Fixes require timeout statements. See #243. (@ixti) ## 0.9.3 (2015-08-19) * Fixed request URI normalization. See #246. (@ixti) - Avoids query component normalization - Omits fragment component in headline ## 0.9.2 (2015-08-18) * Fixed exceptionless NIO EOF handling. (@zanker) ## 0.9.1 (2015-08-14) * Fix params special-chars escaping. See #246. (@ixti) ## 0.9.0 (2015-07-23) * Support for caching removed. See #240. (@tarcieri) * JRuby 9000 compatibility
jperkin
pushed a commit
that referenced
this issue
Nov 17, 2015
jperkin
pushed a commit
that referenced
this issue
Dec 14, 2015
# Liquid Version History ## 3.0.5 / 2015-07-23 / branch "3-0-stable" * Fix test failure under certain timezones [Dylan Thacker-Smith] ## 3.0.4 / 2015-07-17 * Fix chained access to multi-dimensional hashes [Florian Weingarten] ## 3.0.3 / 2015-05-28 * Fix condition parse order in strict mode (#569) [Justin Li, pushrax] ## 3.0.2 / 2015-04-24 * Expose VariableLookup private members (#551) [Justin Li, pushrax] * Documentation fixes ## 3.0.1 / 2015-01-23 * Remove duplicate `index0` key in TableRow tag (#502) [Alfred Xing] ## 3.0.0 / 2014-11-12 * Removed Block#end_tag. Instead, override parse with `super` followed by your code. See #446 [Dylan Thacker-Smith, dylanahsmith] * Fixed condition with wrong data types, see #423 [Bogdan Gusiev] * Add url_encode to standard filters, see #421 [Derrick Reimer, djreimer] * Add uniq to standard filters [Florian Weingarten, fw42] * Add exception_handler feature, see #397 and #254 [Bogdan Gusiev, bogdan and Florian Weingarten, fw42] * Optimize variable parsing to avoid repeated regex evaluation during template rendering #383 [Jason Hiltz-Laforge, jasonhl] * Optimize checking for block interrupts to reduce object allocation #380 [Jason Hiltz-Laforge, jasonhl] * Properly set context rethrow_errors on render! #349 [Thierry Joyal, tjoyal] * Fix broken rendering of variables which are equal to false, see #345 [Florian Weingarten, fw42] * Remove ActionView template handler [Dylan Thacker-Smith, dylanahsmith] * Freeze lots of string literals for new Ruby 2.1 optimization, see #297 [Florian Weingarten, fw42] * Allow newlines in tags and variables, see #324 [Dylan Thacker-Smith, dylanahsmith] * Tag#parse is called after initialize, which now takes options instead of tokens as the 3rd argument. See #321 [Dylan Thacker-Smith, dylanahsmith] * Raise `Liquid::ArgumentError` instead of `::ArgumentError` when filter has wrong number of arguments #309 [Bogdan Gusiev, bogdan] * Add a to_s default for liquid drops, see #306 [Adam Doeler, releod] * Add strip, lstrip, and rstrip to standard filters [Florian Weingarten, fw42] * Make if, for & case tags return complete and consistent nodelists, see #250 [Nick Jones, dntj] * Prevent arbitrary method invocation on condition objects, see #274 [Dylan Thacker-Smith, dylanahsmith] * Don't call to_sym when creating conditions for security reasons, see #273 [Bouke van der Bijl, bouk] * Fix resource counting bug with respond_to?(:length), see #263 [Florian Weingarten, fw42] * Allow specifying custom patterns for template filenames, see #284 [Andrei Gladkyi, agladkyi] * Allow drops to optimize loading a slice of elements, see #282 [Tom Burns, boourns] * Support for passing variables to snippets in subdirs, see #271 [Joost Hietbrink, joost] * Add a class cache to avoid runtime extend calls, see #249 [James Tucker, raggi] * Remove some legacy Ruby 1.8 compatibility code, see #276 [Florian Weingarten, fw42] * Add default filter to standard filters, see #267 [Derrick Reimer, djreimer] * Add optional strict parsing and warn parsing, see #235 [Tristan Hume, trishume] * Add I18n syntax error translation, see #241 [Simon Hørup Eskildsen, Sirupsen] * Make sort filter work on enumerable drops, see #239 [Florian Weingarten, fw42] * Fix clashing method names in enumerable drops, see #238 [Florian Weingarten, fw42] * Make map filter work on enumerable drops, see #233 [Florian Weingarten, fw42] * Improved whitespace stripping for blank blocks, related to #216 [Florian Weingarten, fw42] ## 2.6.3 / 2015-07-23 / branch "2-6-stable" * Fix test failure under certain timezones [Dylan Thacker-Smith]
jperkin
pushed a commit
that referenced
this issue
Jan 9, 2016
o Switch to using gtk-mac-bundler and jhbuild for building the OS X installer. This promises to reduce a lot of the problems we've had with local paths and dependencies using the py2app and macports build system. [Daniel Miller] o The Windows installer is now built with NSIS 2.47 which features LoadLibrary security hardening to prevent DLL hijacking and other unsafe use of temporary directories. Thanks to Stefan Kanthak for reporting the issue to NSIS and to us and the many other projects that use it. o Updated the OpenSSL shipped with our binary builds (Windows, OS X, and RPM) to 1.0.2e. o [Zenmap] [GH-235] Fix several failures to launch Zenmap on OS X. The new build process eliminates these errors: IOError: [Errno 2] No such file or directory: '/Applications/Zenmap.app/Contents/Resources/etc/pango/pangorc.in' LSOpenURLsWithRole() failed for the application /Applications/Zenmap.app with error -10810. o [NSE] [GH-254] Update the TLSSessionRequest probe in ssl-enum-ciphers to match the one in nmap-service-probes, which was fixed previously to correct a length calculation error. [Daniel Miller] o [NSE] [GH-251] Correct false positives and unexpected behavior in http-* scripts which used http.identify_404 to determine when a file was not found on the target. The function was following redirects, which could be an indication of a soft-404 response. [Tom Sellers] o [NSE] [GH-241] Fix a false-positive in hnap-info when the target responds with 200 OK to any request. [Tom Sellers] o [NSE] [GH-244] Fix an error response in xmlrpc-methods when run against a non-HTTP service. The expected behavior is no output. [Niklaus Schiess] o [NSE] Fix SSN validation function in http-grep, reported by Bruce Barnett.
jperkin
pushed a commit
that referenced
this issue
Mar 18, 2016
=== Net::LDAP 0.14.0
* Normalize the encryption parameter passed to the LDAP constructor {#264}[ruby-ldap/ruby-net-ldap#264]
* Update Docs: Net::LDAP now requires ruby >= 2 {#261}[ruby-ldap/ruby-net-ldap#261]
* fix symbol proc {#255}[ruby-ldap/ruby-net-ldap#255]
* fix trailing commas {#256}[ruby-ldap/ruby-net-ldap#256]
* fix deprecated hash methods {#254}[ruby-ldap/ruby-net-ldap#254]
* fix space after comma {#253}[ruby-ldap/ruby-net-ldap#253]
* fix space inside brackets {#252}[ruby-ldap/ruby-net-ldap#252]
* Rubocop style fixes {#249}[ruby-ldap/ruby-net-ldap#249]
* Lazy initialize Net::LDAP::Connection's internal socket {#235}[ruby-ldap/ruby-net-ldap#235]
* Support for rfc3062 Password Modify, closes #163 {#178}[ruby-ldap/ruby-net-ldap#178]
jperkin
pushed a commit
that referenced
this issue
Aug 4, 2016
0.14.1 2016-07-05
BUG FIXES
* Fix regression removing untouched refs when pushing over SSH.
(Jelmer Vernooij #441)
* Skip Python3 tests for SWIFT contrib module, as it has not yet
been ported.
0.14.0 2016-07-03
BUG FIXES
* Fix ShaFile.id after modification of a copied ShaFile.
(Félix Mattrat, Jelmer Vernooij)
* Support removing refs from porcelain.push.
(Jelmer Vernooij, #437)
* Stop magic protocol ref `capabilities^{}` from leaking out
to clients. (Jelmer Vernooij, #254)
IMPROVEMENTS
* Add `dulwich.config.parse_submodules` function.
* Add `RefsContainer.follow` method. (#438)
jperkin
pushed a commit
that referenced
this issue
Aug 4, 2016
Upstream changes:
0.9995 2016-07-27T09:23:55Z
- Taught the `add` command not to ignore the `--change` option.
- The `add` command now emits a usage statement when no change name is
passed to it.
- The `add` command now helpfully suggests using the --change option when
attempting to add a change with the same name as a target. Thanks to
Ivan Nunes for the report!
- The `tag` command now helpfully suggests using the --tag option when
attempting to add a tag with the same name as a target.
- Added `--global` as an alias for `--user` to the `config` command. This
alias benefits the muscle memory of Git users.
- Added a note for Git users to the `sqitch-revert` documentation, to
head off potential confusion with `git revert`. Thanks to Eric
Br矇chemier for the "time travel" analogy and wording.
- Fixed an "uninitialized value" error when creating a registry database
on Windows. Thanks to Steven C. Buttgereit for the report (Issue #289).
- Fixed editor selection to prioritize the `core.editor` configuration
variable over the `$EDITOR` environment variable. The `$SQITCH_EDITOR`
environment variable still trumps all. Thanks to Jim Nasby for the pull
request (#296).
- Added detection of the `$VISUAL` environment variable to Editor
selection, prioritzed after the `core.editor` configuration variable
and before the `$EDITOR` environment variable. Thanks to Jim Nasby for
the pull request (#296).
- Updated the DateTime code to set the locale via `set_locale()` instead
of `set()`, as the latter may actually change the local time
unintentionally, and has been deprecated since DateTime v1.04. Thanks
to Dave Rolsky for the pull request (#304).
0.9994 2016-01-08T19:46:43Z
- Reduced minimum required MySQL engine from 5.1.0 to 5.0.0. Thanks to
@dgc-wh for testing it (Issue #251).
- Fixed floating-point rounding issue with SQLite registry versions on
Perls with 16-byte doubles. Thanks to H. Merijn Brand for the report
and testing.
- Fixed an error when adding an engine with the `engine` command. Thanks
to Victor Mours for the report and fix!
- Updated the Oracle engine to support Oracle Wallet connection strings,
where no username or host is in the connection URI. Thanks to Timothy
Procter for the patch!
- Improved the installer's selection of the prefix in which to install
`etc` files to better match the `--installdirs` option, which defaults
to the "site" directories. Thanks to @carragom for the pull request
(#265).
- Added missing dash to `-engine` in sample calls to `sqitch init` in the
tutorials. Thanks to Andrew Dunstan for the spot (Issue #268).
- Fixed broken Vertica documentation links.
- Attempting to revert a database with no associated registry no longer
reports the registry as version 0, but correctly reports that no
registry can be found. Thanks to Arnaldo Piccinelli for the spot (Issue
#271).
- Fixed the search for change IDs in engines to match the search for
changes. Specifically, change ID seaerch now properly handles the
offset characters `~` and `^`. This bug mainly affected the `verify`
command, but it's good to address the inconsistency, done mainly by
adding the `find_change_id` and `change_id_offset_from_id` methods to
complement the `find_change` and `change_offset_from_id` methods.
Thanks to Andrew Dunstan for the spot (Issue #272).
- Fixed the `flips` table example in the MySQL tutorial. It was
inappropriately copied from the PostgreSQL tutorial at some point.
Thanks to Jeff Carpenter for the spot (Issue #254)!
0.9993 2015-08-17T17:55:26Z
[Bug Fixes]
- Eliminated test failures due to warnings from DateTime::Locale when
`LC_TIME` is set to C.UTF-8. Thanks to Shantanu Bhadoria for the report
and Dave Rolsky for the workaround.
- Fixed an error checking the registry version when the local uses a
comma for decimal values. Thanks to Steffen M羹ller for the report
(Issue #234).
- Worked around an error setting the MySQL storage engine using versions
of DBI prior to 1.631. Thanks to melon-babak for the report!
- Fixed an error from the Oracle engine when deploying more than 1000
changes. Thanks to Timothy Procter and Minh Hoang for the report and
testing the fix.
- Fixed a bunch of typos in error messages, comments, and documentation.
Thanks to Dmitriy for the pull request!
- Fixed test failures due to new warnings from File::Path on Perl
5.23.1.
- On Firebird, Looking up a change and tag in the database (via the
`--onto` option to `rebase` or the `--to` option to `revert`, among
others) would sometimes return the incorrect change if the change has
been reworked two or more times. Was fixed for the other engines in
v0.9991.
- Fixed the `--all` option used to apply a command to all known targets
so that it loads only targets specified by the local configuration.
Otherwise, user and system configuration can get in the way when they
specify engines and targets not used by the current project.
[Improvements]
- Added support for the `--set` option when deploying to MySQL. Thanks to
Chris Bandy for figuring out how to do it!
- Added support for a "reworked directory". By default, reworked change
scripts live in the deploy, revert, and verify directories along with
all the other change scripts. But if that starts to get too messy, or
you simply don't want to see them, add a `reworked_dir` setting to the
core, engine, or target config and reworked scripts will be stored
there, instead. Also supported are `reworked_deploy_dir`,
`reworked_revert_dir`, and `reworked_verify_dir`.
- Added the `--dir` option to the `init`, `engine`, and `target`
commands.
- Copied the core configuration options (`--engine`, `--target`,
`--plan-file`, `--registry`, etc.) to the `init`, `engine`, and
`target` commands. This means that they can be specified after the
command, which is a bit more natural. It also means that the
`--registry` and `--client` options of the `target` are no longer
deprecated.
- The `init` command on longer writes out commented values for the
`deploy_dir`, `revert_dir`, or `verify_dir` settings. I think these
settings are not commonly used, and it would start to get crowded if we
also added their "reworked" variants, which will be used still less.
- Added the `alter` action to the `engine` and `target` commands to set
engine and target properties.
- Added support for setting reworked directories to the `engine` and
`target` commands.
- Reformatted the output of the `engine` and `target` command `show`
actions to include reworked directories, and to bit a bit less flat.
- Attempting to add or alter an engine with a target URI that connects to
a different engine now triggers an error. For example, you can't set
the target for engine `pg` to `db:sqlite:`.
- The `add` and `alter` actions of the `engine` and `target` commands
now create script directories if they don't already exist.
- The `add` action of the `engine` and `target` commands now creates a
plan file if one does not exist in the specified location for the
engine or target.
- Added the `deploy_dir`, `revert_dir`, and `verify_dir` methods to
App::Sqitch::Plan::Change. Each points to the proper directory for the
target depending on whether or not the change has been reworked.
- In the MySQL engine, the following URI query params will be converted
to options passed to the command-line client, if they're present:
* mysql_compression=1 => --compress
* mysql_ssl=1 => --ssl
* mysql_connect_timeout => --connect_timeout
* mysql_init_command => --init-command
* mysql_socket => --socket
* mysql_ssl_client_key => --ssl-key
* mysql_ssl_client_cert => --ssl-cert
* mysql_ssl_ca_file => --ssl-ca
* mysql_ssl_ca_path => --ssl-capath
* mysql_ssl_cipher => --ssl-cipher
[Documentation]
- Added the "Overworked" section to sqitch-configuration guide with an
example of how to move reworked change scripts into a `reworked_dir`.
[Deprecations]
- Deprecated the `set-*` actions in the `engine` and `target` commands in
favor of the new `alter` action.
- The core `--deployed-dir`, `--revert-dir`, and `--verify-dir` options
are deprecated in favor of the `--dir` option on the `init`, `engine`,
and `target` command.
0.9992 2015-05-20T23:51:41Z
- On PostgreSQL, Sqitch now sets the `client_encoding` parameter to
`UTF8` for its own connection to the database. This ensures that data
sent to and from the databse should always be properly encoded and
decoded. Users should still set the proper encodings for change scripts
as appropriate.
- Fixed test failures due to path differences on Windows.
- DateTime::TimeZone is now explicitly required in an attempt to head off
"Cannot determine local time zone" errors.
- Corrected some typos and thinkos in `sqitchtutorial-oracle`, thanks to
George Hartzell.
- Improved the script to upgrade an Oracle registry to v1.0 to support
versions prior to Oracle 12, thanks to Timothy Procter.
- Added missing closing parenthesis to the "Nothing to deploy" message.
Thanks to George Hartzell for the pull request (Issue #226).
- Replaced the unique constraint on the `script_hash` column in the
`changes` registry table with a unique constraint on `project` and
`script_hash`. This is to allow a deploy script to be used in more than
one project in a single database. This change increments the registry
version to v1.1. Thanks to Timothy Procter for the report.
- Updated the registry check constraints to have consistent names on the
engines that support them. This will make it easier to modify the
constraints in the future.
- Fixed precision issues with the registry version on MySQL and Firebird.
- Added comment to sqitch-passwords guide that MySQL::Config is required
to read passwords from the MySQL configuration files. Thanks to
Sterling Hanenkamp for the patch!
0.9991 2015-04-03T23:14:39Z
[Improvements]
- Reduced minimum required MySQL engine from 5.6.4 to 5.1.0. Versions
prior to 5.6.4 lose the following features:
* Versions earlier than 5.6.4 is fractional second precision on
registry `DATETIME` columns. Since the ordering of those timestamps
is so important to the functioning of Sqitch, it will sleep in 100 ms
increments between logging changes to the registry until the time has
ticked over to the next second. Naturally, reverts and deploys will
be a little slower on versions of MySQL before 5.6.4, but accurate.
* Versions earlier than 5.5.0 lose the `checkit()` functions, which
would otherwise be used to emulate CHECK constraints in the registry,
as well as in user-created verify scripts, as recommended in the
MySQL tutorial, `sqitchtutorial-mysql`.
- Added a script to update the `DATETIME` columns in a MySQL Sqitch
registry that was upgraded to MySQL 5.6.4 or higher. It will be
installed as `tools/upgrade-registry-to-mysql-5.6.4.sql` in the
directory returned by `sqitch --etc`.
- Added a script to add the `checkit()` function and registry triggers to
emulate CHECK constraints to a MySQL Sqitch registry that was upgraded
to MySQL 5.5.0 or higher. It will be installed as
`tools/upgrade-registry-to-mysql-5.5.0.sql` in the directory returned
by `sqitch --etc`.
- The `init` command now throws an error when the plan file already
exists and is invalid or defined for a different project. Thanks to
Gabriel Potk獺ny for the suggestion (Issue #214).
- All commands that take target arguments can now specify them as engine
names or plan file paths as well as target names and URIs.
- Added the `--all` option and the `$command.all` configuration variable
to the `add`, `rework`, `tag`, and `bundle` commands. This option tells
the commands to do their thing for all plans known from the
configuration, not just the default plan.
- Pass engine, target, or plan file names to the `add`, `rework`, `tag`,
and `bundle` commands` commands to specify specify one or more targets,
engines, and plans to act on.
- Added the `--change` option to the `add`, `rework`, and `tag` commands
to distinguish the change to be added, reworked, or tagged from
plan-specifying arguments, if necessary.
- Added the `--tag` option to the `tag` command to distinguish the tag to
be added from plan-specifying arguments, if necessary.
- Changed the short variant of the `--conflicts` option to the `add` and
`rework` commands from `-c` to `-x`. The `-c` option is now used as the
short variant for `--change` (and `--conflicts` has almost certainly
never been used, anyway).
- Added the `engine` and `project` variables to the execution of script
templates by the `add` command. The default templates now use it to
make their first lines one of:
* -- Deploy [% project %]:[% change %] to [% engine]
* -- Revert [% project %]:[% change %] from [% engine]
* -- Verify [% project %]:[% change %] on [% engine]
[Bug Fixes]
- DateTime::TimeZone::Local::Win32 is now required on Windows.
- The MySQL engine no longer passes `--skip-pager` on Windows, since
it is not supported there. Thanks to Gabriel Potk獺ny for the report
(Issue #213).
- Fixed "no such table: changes" error when upgrading the SQLite
registry.
- Fixed upgrade failure on PostgreSQL 8.4. Thanks to Phillip Smith for
the report!
- Fixed an error when the `status` command `show_changes` and `show_tags`
configuration variables were set. Thanks to Adrian Klaver for the
report (Issue #219).
- Fixed `log` and `plan` usage statements to properly spell `--abbrev`.
Thanks to Adrian Klaver for the report (Issue #220).
- Fixed the formatting of change notes so that a space precedes the `#`
character whether the note was added by the `--note` option or via an
editor.
- Fixed a bug when parsing plan files with DOS/Windows line endings.
Thanks to Timothy Procter for the report (Issue #212).
- Looking up a change and tag in the database (via the `--onto` option to
`rebase` or the `--to` option to `revert`, among others) would
sometimes return the incorrect change if the change has been reworked
two or more times. Thanks to BryLo for the report!
[Documentation]
- Updated docs to be consistent in referring to the location of the system
configuration and template location as `$(prefix)/etc/sqitch`. Also
added notes pointing to the `--etc-dir` to find out exactly what that
resolves to. Suggested by Joseph Anthony Pasquale Holsten (Issue #167).
[Deprecations]
- Reverted deprecation of the database connection options. Target URIs
are still generally preferred, but sometimes you want to use a target
but just change the user name or database name. Retaining the options
is the easiest way to do this. Plus, a fair number of people have
scripts that use these options, and it seems petty to break them. Sorry
for the double-take here! The list of un-deprecated options is:
* `--db-client`
* `--db-host`
* `--db-port`
* `--db-username`
* `--db-password`
* `--db-name`
0.999 2015-02-12T19:43:45Z
- Improved MySQL missing table error detection by relying on error codes
instead of matching a (possibly localized) error string.
- Made the registry upgrade more transparent when deploying. Sqitch is
now is a little more vigilent in checking for things being out-of-date
and updating them.
- Fixed an issue where the `status` command would return an error when
run against a an older version of the registry.
- Fixed a Postgres test failure when DBD::Pg is installed but psql is not
in the path.
- Now require Config::GitLike 1.15 to build on Windows in order to avoid
test failures when Cwd::abs_path dies on non-existant paths.
- Clarified the behavior of each `deploy` reversion mode with regard to
deploy script vs. verify script failures, and with the expectation that
deploy scripts are atomic.
- Target passwords can now be set via a single environment variable,
`$SQITCH_PASSWORD`. Its value will override URI-specified password.
- Added the sqitch-passwords and sqitch-environment guides.
0.998 2015-01-15T22:17:44Z
- Fixed a bug in `sqitch engine update-config` where it would add data to
config files that did not previously have them, or report that data was
present in nonexistent config files.
- Added the `releases` table to the databases. This table will keep track
of releases of the Sqitch registry schema.
- The Oracle `registry` variable is now always `DEFINE`d when Oracle
scripts run.
- Added the `upgrade` command, which upgrades the schema for the Sqitch
registry for a target database.
- Added the `script_hash` column to the `changes` registry table. This
column contains a SHA-1 hash of the deploy script for the change at the
time it was deployed. For existing registries, the upgrade script sets
its value to be the same as the change ID. This value is update the
next time a project is deployed to the database.
- The error message when `deploy` cannot find the currently-deployed
change ID in the plan now includes more contextual information,
including the change name, associated tags, and the plan file name.
Suggested by Curtis Poe (Issue #205).
- Comments on Firebird registry objects are now created with the
`COMMENT` command, rather than INSERTs into catalog tables.
- Added support for "merge" events, though none are logged, yet.
jperkin
pushed a commit
that referenced
this issue
Oct 22, 2016
## 1.2.1 * Fixed #272. Workaround Ruby bug 12832 which caused interpreter to hang. See https://bugs.ruby-lang.org/issues/12832. Thanks to @chrisroos & @petems (6f1c8b9b, #273). ## 1.2.0 * Always use prepended module to stub class & instance methods for Ruby v2+ - thanks to @grosser & @chrisroos (43d56671, #244) * Always use prepended module to stub AnyInstance methods in Ruby v2+ - thanks to @chrisroos (#262) * Always set visibility of stub method to match stubbed method on included module - thanks to @grosser & @chrisroos (e87c03b0, #248) * Always set visibility to stub method to match stubbed method on superclass - thanks to @chrisroos (38d902ad) * Allow stubbing of method to which any instance responds (#200) * Allow `includes` matcher to take matcher arguments - thanks to @lazyatom (#217) * Avoid exception in older version of Rubygems - thanks to @chrisroos (78d930a7) * Add licenses to gemspec as requested by @coreyhaines (#201) * Fix typo in README - thanks to @jaredbeck (6119460d) * Added section about using Mocha with RSpec & Rails to README (#221) * Fix documentation for Mocha::API#stub method - thanks to @raeno (599b1dcd) * Added backers and sponsors from OpenCollective - thanks to @piamancini (#253) * Fix typo in docs for equals - thanks to @alexcoco (#254) * Add known issue for Ruby v1.8 to README - thanks to @chrisroos (2c642096)
jperkin
pushed a commit
that referenced
this issue
Jan 23, 2017
This upgrade fixes compatibility with new lxml.
Upstream changelog
==================
2.3.1
_This is a micro release and I have very little time on my hands right now sorry_
Fix crash with no values when the print_values_position param is set (thanks @cristen)
2.3.0
New call API: chart = Line(fill=True); chart.add('title', [1, 3, 12]); chart.render() can now be replaced with Line(fill=True)(1, 3, 12, title='title').render()
Drop python 2.6 support
2.2.3
Fix bar static value positioning (#315)
Add stroke_opacity style (#321)
Remove useless js in sparklines. (#312)
2.2.2
Add classes option.
Handle ellipsis in list type configs to auto-extend parent. (Viva python3)
2.2.0
Support interruptions in line charts (thanks @piotrmaslanka #300)
Fix confidence interval reactiveness (thanks @chartique #296)
Add horizontal line charts (thanks @chartique #301)
There is now a formatter config option to format values as specified. The formatter callable may or may not take chart, serie and index as argument. The default value formatting is now chart dependent and is value_formatter for most graph but could be a combination of value_formatter and x_value_formatter for dual charts.
The human_readable option has been removed. Now you have to use the pygal.formatters.human_readable formatter (value_formatter=human_readable instead of human_readable=True)
New chart type: SolidGauge (thanks @chartique #295)
Fix range option for some Charts (#297 #298)
Fix timezones for DateTimeLine for python 2 (#306, #302)
Set default uri protocol to https (should fix a lot of "no tooltips" bugs).
2.1.1
Import scipy as a last resort in stats.py (should workaround bugs like #294 if scipy is installed but not used)
2.1.0
Bar print value positioning with print_values_position. Can be top, center or bottom (thanks @chartique #291) ci doc
Confidence intervals (thanks @chartique #292) data doc
2.0.12
Use custom xml_declaration avoiding conflict with processing instructions
2.0.11
lxml 3.5 compatibility (#282)
2.0.10
Fix transposable_node in case all attributes are not there. (thanks @yobuntu).
2.0.9
Add dynamic_print_values to show print_values on legend hover. (#279)
Fix unparse_color for python 3.5+ compatibility (thanks @felixonmars, @sjourdois)
Process major labels as labels. (#263)
Fix labels rotation > 180 (#257)
Fix secondary axis
Don't forget secondary series in table rendering (#260)
Add defs config option to allow adding gradients and patterns.
2.0.8
Fix value overwrite in map. (#275)
2.0.7
Fixing to checks breaking rendering of DateTimeLine and TimeDeltaLine (#264) (thanks @mmrose)
Fix render_in_browser. (#266) (#268) (thanks @waixwong)
2.0.6
Avoid x label formatting when label is a string
2.0.5
Fix x label formatting
2.0.4
Fix map coloration
2.0.3
Fix label adaptation. (#256)
Fix wrong radar truncation. (#255)
2.0.2
Fix view box differently to avoid getting a null height on huge numbers. (#254)
Fix broken font_family default
Fix non namespaced svg (without embed) javascript by adding uuid in config object. (config is in window.pygal now).
2.0.1
Fix the missing title on x_labels with labels.
Auto cast to str x labels in non dual charts (#178)
Add print_labels option to print label too. (#197)
Add value_label_font_family and value_label_font_size style options for print_labels.
Default print_zeroes to True
(Re)Add xlink in desc to show on tooltip
Activate element on tooltip hovering. (#106)
Fix radar axis behaviour (#247)
Add tooltip support in metadata to add a title (#249).
Take config class options in account too.
2.0.0
Rework the ghost mechanism to come back to a more object oriented behavior, storing all state in a state object which is created on every render. (#161)
Refactor maps
Add world continents
Add swiss cantons map (thanks @sergedroz)
Add inverse_y_axis options to reverse graph (#24)
Fix DateTimeLine time data loss (#193)
Fix no data for graphs with only zeroes (#148)
Support value formatter for pie graphs (#218) (thanks @never-eat-yellow-snow)
Add new Box plot modes and outliers and set extremes as default (#226 #121 #149) (thanks @djezar)
Add secondary_range option to set range for secondary values. (#203)
Maps are now plugins, they are removed from pygal core and moved to packages (pygal_maps_world, pygal_maps_fr, pygal_maps_ch, ...) (#225)
Dot now supports negative values
Fix dot with log scale (#201)
Fix y_labels behaviour for lines
Fix x_labels and y_labels behaviour for xy like
Improve gauge a bit
Finally allow call chains on add
Transform min_scale and max_scale as options
mode option has been renamed to a less generic name: box_mode
fix stack_from_top for stacked lines
Add flake8 test to py.test in tox
Remove stroke style in style and set it as a global / serie configuration.
Fix None values in tables
Fix timezones in DateTimeLine
Rename in Style foreground_light as foreground_strong
Rename in Style foreground_dark as foreground_subtle
Add a render_data_uri method (#237)
Move font_size config to style
Add font_family for various elements in style
Add googlefont:font support for style fonts
Add tooltip_fancy_mode to revert to old tooltips
Add auto print_value color + a configurable value_colors list in style
Add guide_stroke_dasharray and guide_stroke_dasharray in style to customize guides (#242) (thanks @cbergmiller)
Refactor label processing in a _compute_x_labels and _compute_y_labels method. Handle both string and numbers for all charts. Create a Dual base chart for dual axis charts. (#236)
Better js integration in maps. Use the normal tooltip.
jperkin
pushed a commit
that referenced
this issue
Jun 5, 2017
## v0.16.0 - **Support for Ruby 1.8 has been discontinued** - [Corey Farwell](https://github.com/frewsxcv) [#256](egonSchiele/contracts.ruby#256) - Enhancement: Add a `Contracts::Attrs` module containing attribute w/ contracts utilities - [Corey Farwell](https://github.com/frewsxcv) [#255](egonSchiele/contracts.ruby#255) - Bugfix: Fix StrictHash contract for extra keys - [Maciej Malecki](https://github.com/smt116) [#254](egonSchiele/contracts.ruby#254) ## v0.15.0 - Bugfix: Func contract's return value isn't enforced with blocks - [Piotr Szmielew](https://github.com/esse) [#251](egonSchiele/contracts.ruby#251) - Bugfx: Fix contracts used in AR-models - [Gert Goet](https://github.com/eval) [#237](egonSchiele/contracts.ruby#237)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Currently we have to compile a few packages ourselves to enable non-default PKG_OPTIONS.
If the SmartOS builds could already include these that would be helpful:
The text was updated successfully, but these errors were encountered: