Skip to content

TedThemistokleous/onnxruntime_backend

 
 

Repository files navigation

License

ONNX Runtime Backend

The Triton backend for the ONNX Runtime. You can learn more about Triton backends in the backend repo. Ask questions or report problems on the issues page.

Use a recent cmake to build and install in a local directory. Typically you will want to build an appropriate ONNX Runtime implementation as part of the build. You do this by specifying a ONNX Runtime version and a Triton container version that you want to use with the backend. You can find the combination of versions used in a particular Triton release in the TRITON_VERSION_MAP at the top of build.py in the branch matching the Triton release you are interested in. For example, to build the ONNX Runtime backend for Triton 23.04, use the versions from TRITON_VERSION_MAP in the r23.04 branch of build.py.

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX:PATH=`pwd`/install -DTRITON_BUILD_ONNXRUNTIME_VERSION=1.14.1 -DTRITON_BUILD_CONTAINER_VERSION=23.04 ..
$ make install

The resulting install/backends/onnxruntime directory can be added to a Triton installation as /opt/tritonserver/backends/onnxruntime.

The following required Triton repositories will be pulled and used in the build. By default the "main" branch/tag will be used for each repo but the listed CMake argument can be used to override.

  • triton-inference-server/backend: -DTRITON_BACKEND_REPO_TAG=[tag]
  • triton-inference-server/core: -DTRITON_CORE_REPO_TAG=[tag]
  • triton-inference-server/common: -DTRITON_COMMON_REPO_TAG=[tag]

You can add TensorRT support to the ONNX Runtime backend by using -DTRITON_ENABLE_ONNXRUNTIME_TENSORRT=ON. You can add OpenVino support by using -DTRITON_ENABLE_ONNXRUNTIME_OPENVINO=ON -DTRITON_BUILD_ONNXRUNTIME_OPENVINO_VERSION=<version>, where <version> is the OpenVino version to use and should match the TRITON_VERSION_MAP entry as described above. So, to build with both TensorRT and OpenVino support:

$ mkdir build
$ cd build
$ cmake -DCMAKE_INSTALL_PREFIX:PATH=`pwd`/install -DTRITON_BUILD_ONNXRUNTIME_VERSION=1.14.1 -DTRITON_BUILD_CONTAINER_VERSION=23.04 -DTRITON_ENABLE_ONNXRUNTIME_TENSORRT=ON -DTRITON_ENABLE_ONNXRUNTIME_OPENVINO=ON -DTRITON_BUILD_ONNXRUNTIME_OPENVINO_VERSION=2021.2.200 ..
$ make install

ONNX Runtime with TensorRT optimization

TensorRT can be used in conjunction with an ONNX model to further optimize the performance. To enable TensorRT optimization you must set the model configuration appropriately. There are several optimizations available for TensorRT, like selection of the compute precision and workspace size. The optimization parameters and their description are as follows.

  • precision_mode: The precision used for optimization. Allowed values are "FP32", "FP16" and "INT8". Default value is "FP32".
  • max_workspace_size_bytes: The maximum GPU memory the model can use temporarily during execution. Default value is 1GB.
  • int8_calibration_table_name: Specify INT8 calibration table name. Applicable when precision_mode=="INT8" and the models do not contain Q/DQ nodes. If calibration table is provided for model with Q/DQ nodes then ORT session creation will fail.
  • int8_use_native_calibration_table: Calibration table to use. Allowed values are 1 (use native TensorRT generated calibration table) and 0 (use ORT generated calibration table). Default is 0. **Note: Latest calibration table file needs to be copied to trt_engine_cache_path before inference. Calibration table is specific to models and calibration data sets. Whenever new calibration table is generated, old file in the path should be cleaned up or be replaced.
  • trt_engine_cache_enable: Enable engine caching.
  • trt_engine_cache_path: Specify engine cache path.

The section of model config file specifying these parameters will look like:

.
.
.
optimization { execution_accelerators {
  gpu_execution_accelerator : [ {
    name : "tensorrt"
    parameters { key: "precision_mode" value: "FP16" }
    parameters { key: "max_workspace_size_bytes" value: "1073741824" }}
  ]
}}
.
.
.

ONNX Runtime with CUDA Execution Provider optimization

When GPU is enabled for ORT, CUDA execution provider is enabled. If TensorRT is also enabled then CUDA EP is treated as a fallback option (only comes into picture for nodes which TensorRT cannot execute). If TensorRT is not enabled then CUDA EP is the primary EP which executes the models. ORT enabled configuring options for CUDA EP to further optimize based on the specific model and user scenarios. To enable CUDA EP optimization you must set the model configuration appropriately. There are several optimizations available, like selection of max mem, cudnn conv algorithm etc... The optimization parameters and their description are as follows.

  • cudnn_conv_algo_search: CUDA Convolution algorithm search configuration. Available options are 0 - EXHAUSTIVE (expensive exhaustive benchmarking using cudnnFindConvolutionForwardAlgorithmEx). This is also the default option, 1 - HEURISTIC (lightweight heuristic based search using cudnnGetConvolutionForwardAlgorithm_v7), 2 - DEFAULT (default algorithm using CUDNN_CONVOLUTION_FWD_ALGO_IMPLICIT_PRECOMP_GEMM)

  • gpu_mem_limit: CUDA memory limit. To use all possible memory pass in maximum size_t. Defaults to SIZE_MAX.

  • arena_extend_strategy: Strategy used to grow the memory arena. Available options are: 0 = kNextPowerOfTwo, 1 = kSameAsRequested. Defaults to 0.

  • do_copy_in_default_stream: Flag indicating if copying needs to take place on the same stream as the compute stream in the CUDA EP. Available options are: 0 = Use separate streams for copying and compute, 1 = Use the same stream for copying and compute. Defaults to 1.

The section of model config file specifying these parameters will look like:

.
.
.
parameters { key: "cudnn_conv_algo_search" value: { string_value: "0" } }
parameters { key: "gpu_mem_limit" value: { string_value: "4294967200" } }
.
.
.

ONNX Runtime with OpenVINO optimization

OpenVINO can be used in conjunction with an ONNX model to further optimize performance. To enable OpenVINO optimization you must set the model configuration as shown below.

.
.
.
optimization { execution_accelerators {
  cpu_execution_accelerator : [ {
    name : "openvino"
  } ]
}}
.
.
.

Other Optimization Options with ONNX Runtime

Details regarding when to use these options and what to expect from them can be found here

Model Config Options

  • intra_op_thread_count: Sets the number of threads used to parallelize the execution within nodes. A value of 0 means ORT will pick a default which is number of cores.
  • inter_op_thread_count: Sets the number of threads used to parallelize the execution of the graph (across nodes). If sequential execution is enabled this value is ignored. A value of 0 means ORT will pick a default which is number of cores.
  • execution_mode: Controls whether operators in the graph are executed sequentially or in parallel. Usually when the model has many branches, setting this option to 1 .i.e. "parallel" will give you better performance. Default is 0 which is "sequential execution."
  • level: Refers to the graph optimization level. By default all optimizations are enabled. Allowed values are -1, 1 and 2. -1 refers to BASIC optimizations, 1 refers to basic plus extended optimizations like fusions and 2 refers to all optimizations being disabled. Please find the details here.
optimization {
  graph : {
    level : 1
}}

parameters { key: "intra_op_thread_count" value: { string_value: "0" } }
parameters { key: "execution_mode" value: { string_value: "0" } }
parameters { key: "inter_op_thread_count" value: { string_value: "0" } }

  • enable_mem_arena: Use 1 to enable the arena and 0 to disable. See this for more information.
  • enable_mem_pattern: Use 1 to enable memory pattern and 0 to disable. See this for more information.
  • memory.enable_memory_arena_shrinkage: See this for more information.

Command line options

Thread Pools

When intra and inter op threads is set to 0 or a value higher than 1, by default ORT creates threadpool per session. This may not be ideal in every scenario, therefore ORT also supports global threadpools. When global threadpools are enabled ORT creates 1 global threadpool which is shared by every session. Use the backend config to enable global threadpool. When global threadpool is enabled, intra and inter op num threads config should also be provided via backend config. Config values provided in model config will be ignored.

--backend-config=onnxruntime,enable-global-threadpool=<0,1>, --backend-config=onnxruntime,intra_op_thread_count=<int> , --backend-config=onnxruntime,inter_op_thread_count=<int>

Default Max Batch Size

The default-max-batch-size value is used for max_batch_size during Autocomplete when no other value is found. Assuming server was not launched with --disable-auto-complete-config command-line option, the onnxruntime backend will set the max_batch_size of the model to this default value under the following conditions:

  1. Autocomplete has determined the model is capable of batching requests.
  2. max_batch_size is 0 in the model configuration or max_batch_size is omitted from the model configuration.

If max_batch_size > 1 and no scheduler is provided, the dynamic batch scheduler will be used.

--backend-config=onnxruntime,default-max-batch-size=<int>

The default value of default-max-batch-size is 4.

About

The Triton backend for the ONNX Runtime.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 74.1%
  • Python 14.8%
  • CMake 10.0%
  • Shell 1.1%