diff --git a/parm/transfer/transfer_gdas_1a.list b/parm/transfer/transfer_gdas_1a.list deleted file mode 100644 index 00c5306f3b..0000000000 --- a/parm/transfer/transfer_gdas_1a.list +++ /dev/null @@ -1,57 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/*atmf000* -+ /??/atmos/*atmf001* -+ /??/atmos/*atmf002* -+ /??/atmos/*atmf003* -+ /??/atmos/*atmf004* -+ /??/atmos/*atmf005* -+ /??/atmos/*atmf006* -- /??/atmos/* -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/*atmf000* -+ /??/atmos/*atmf001* -+ /??/atmos/*atmf002* -+ /??/atmos/*atmf003* -+ /??/atmos/*atmf004* -+ /??/atmos/*atmf005* -+ /??/atmos/*atmf006* -- /??/atmos/* -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_1b.list b/parm/transfer/transfer_gdas_1b.list deleted file mode 100644 index 998c71d843..0000000000 --- a/parm/transfer/transfer_gdas_1b.list +++ /dev/null @@ -1,53 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/*atmf007* -+ /??/atmos/*atmf008* -+ /??/atmos/*atmf009* -+ /??/atmos/*atmg* -+ /??/atmos/*atmanl* -- /??/atmos/* -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/*atmf007* -+ /??/atmos/*atmf008* -+ /??/atmos/*atmf009* -+ /??/atmos/*atmg* -+ /??/atmos/*atmanl* -- /??/atmos/* -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_1c.list b/parm/transfer/transfer_gdas_1c.list deleted file mode 100644 index 42b1bd4f64..0000000000 --- a/parm/transfer/transfer_gdas_1c.list +++ /dev/null @@ -1,67 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gdas._PDY_/ -- /??/atmos/*atmf000* -- /??/atmos/*atmf001* -- /??/atmos/*atmf002* -- /??/atmos/*atmf003* -- /??/atmos/*atmf004* -- /??/atmos/*atmf005* -- /??/atmos/*atmf006* -- /??/atmos/*atmf007* -- /??/atmos/*atmf008* -- /??/atmos/*atmf009* -- /??/atmos/*atmg* -- /??/atmos/*atmanl* -+ /* -+ /??/ -+ /??/atmos/ -+ /??/atmos/* - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gdas._PDYm1_/ -- /??/atmos/*atmf000* -- /??/atmos/*atmf001* -- /??/atmos/*atmf002* -- /??/atmos/*atmf003* -- /??/atmos/*atmf004* -- /??/atmos/*atmf005* -- /??/atmos/*atmf006* -- /??/atmos/*atmf007* -- /??/atmos/*atmf008* -- /??/atmos/*atmf009* -- /??/atmos/*atmg* -- /??/atmos/*atmanl* -+ /* -+ /??/ -+ /??/atmos/ -+ /??/atmos/* - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_05.list b/parm/transfer/transfer_gdas_enkf_enkf_05.list deleted file mode 100644 index fe1be06e8c..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_05.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem001/ -+ /??/atmos/mem001/** -+ /??/atmos/mem002/ -+ /??/atmos/mem002/** -+ /??/atmos/mem003/ -+ /??/atmos/mem003/** -+ /??/atmos/mem004/ -+ /??/atmos/mem004/** -+ /??/atmos/mem005/ -+ /??/atmos/mem005/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem001/ -+ /??/atmos/mem001/** -+ /??/atmos/mem002/ -+ /??/atmos/mem002/** -+ /??/atmos/mem003/ -+ /??/atmos/mem003/** -+ /??/atmos/mem004/ -+ /??/atmos/mem004/** -+ /??/atmos/mem005/ -+ /??/atmos/mem005/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_10.list b/parm/transfer/transfer_gdas_enkf_enkf_10.list deleted file mode 100644 index b2298be8af..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_10.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem006/ -+ /??/atmos/mem006/** -+ /??/atmos/mem007/ -+ /??/atmos/mem007/** -+ /??/atmos/mem008/ -+ /??/atmos/mem008/** -+ /??/atmos/mem009/ -+ /??/atmos/mem009/** -+ /??/atmos/mem010/ -+ /??/atmos/mem010/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem006/ -+ /??/atmos/mem006/** -+ /??/atmos/mem007/ -+ /??/atmos/mem007/** -+ /??/atmos/mem008/ -+ /??/atmos/mem008/** -+ /??/atmos/mem009/ -+ /??/atmos/mem009/** -+ /??/atmos/mem010/ -+ /??/atmos/mem010/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_15.list b/parm/transfer/transfer_gdas_enkf_enkf_15.list deleted file mode 100644 index 435de61bba..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_15.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem011/ -+ /??/atmos/mem011/** -+ /??/atmos/mem012/ -+ /??/atmos/mem012/** -+ /??/atmos/mem013/ -+ /??/atmos/mem013/** -+ /??/atmos/mem014/ -+ /??/atmos/mem014/** -+ /??/atmos/mem015/ -+ /??/atmos/mem015/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem011/ -+ /??/atmos/mem011/** -+ /??/atmos/mem012/ -+ /??/atmos/mem012/** -+ /??/atmos/mem013/ -+ /??/atmos/mem013/** -+ /??/atmos/mem014/ -+ /??/atmos/mem014/** -+ /??/atmos/mem015/ -+ /??/atmos/mem015/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_20.list b/parm/transfer/transfer_gdas_enkf_enkf_20.list deleted file mode 100644 index e329d227bd..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_20.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem016/ -+ /??/atmos/mem016/** -+ /??/atmos/mem017/ -+ /??/atmos/mem017/** -+ /??/atmos/mem018/ -+ /??/atmos/mem018/** -+ /??/atmos/mem019/ -+ /??/atmos/mem019/** -+ /??/atmos/mem020/ -+ /??/atmos/mem020/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem016/ -+ /??/atmos/mem016/** -+ /??/atmos/mem017/ -+ /??/atmos/mem017/** -+ /??/atmos/mem018/ -+ /??/atmos/mem018/** -+ /??/atmos/mem019/ -+ /??/atmos/mem019/** -+ /??/atmos/mem020/ -+ /??/atmos/mem020/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_25.list b/parm/transfer/transfer_gdas_enkf_enkf_25.list deleted file mode 100644 index fb6d964369..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_25.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem021/ -+ /??/atmos/mem021/** -+ /??/atmos/mem022/ -+ /??/atmos/mem022/** -+ /??/atmos/mem023/ -+ /??/atmos/mem023/** -+ /??/atmos/mem024/ -+ /??/atmos/mem024/** -+ /??/atmos/mem025/ -+ /??/atmos/mem025/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem021/ -+ /??/atmos/mem021/** -+ /??/atmos/mem022/ -+ /??/atmos/mem022/** -+ /??/atmos/mem023/ -+ /??/atmos/mem023/** -+ /??/atmos/mem024/ -+ /??/atmos/mem024/** -+ /??/atmos/mem025/ -+ /??/atmos/mem025/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_30.list b/parm/transfer/transfer_gdas_enkf_enkf_30.list deleted file mode 100644 index bce22494a4..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_30.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem026/ -+ /??/atmos/mem026/** -+ /??/atmos/mem027/ -+ /??/atmos/mem027/** -+ /??/atmos/mem028/ -+ /??/atmos/mem028/** -+ /??/atmos/mem029/ -+ /??/atmos/mem029/** -+ /??/atmos/mem030/ -+ /??/atmos/mem030/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem026/ -+ /??/atmos/mem026/** -+ /??/atmos/mem027/ -+ /??/atmos/mem027/** -+ /??/atmos/mem028/ -+ /??/atmos/mem028/** -+ /??/atmos/mem029/ -+ /??/atmos/mem029/** -+ /??/atmos/mem030/ -+ /??/atmos/mem030/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_35.list b/parm/transfer/transfer_gdas_enkf_enkf_35.list deleted file mode 100644 index 6397c6693e..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_35.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem031/ -+ /??/atmos/mem031/** -+ /??/atmos/mem032/ -+ /??/atmos/mem032/** -+ /??/atmos/mem033/ -+ /??/atmos/mem033/** -+ /??/atmos/mem034/ -+ /??/atmos/mem034/** -+ /??/atmos/mem035/ -+ /??/atmos/mem035/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem031/ -+ /??/atmos/mem031/** -+ /??/atmos/mem032/ -+ /??/atmos/mem032/** -+ /??/atmos/mem033/ -+ /??/atmos/mem033/** -+ /??/atmos/mem034/ -+ /??/atmos/mem034/** -+ /??/atmos/mem035/ -+ /??/atmos/mem035/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_40.list b/parm/transfer/transfer_gdas_enkf_enkf_40.list deleted file mode 100644 index d8a85e529c..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_40.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem036/ -+ /??/atmos/mem036/** -+ /??/atmos/mem037/ -+ /??/atmos/mem037/** -+ /??/atmos/mem038/ -+ /??/atmos/mem038/** -+ /??/atmos/mem039/ -+ /??/atmos/mem039/** -+ /??/atmos/mem040/ -+ /??/atmos/mem040/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem036/ -+ /??/atmos/mem036/** -+ /??/atmos/mem037/ -+ /??/atmos/mem037/** -+ /??/atmos/mem038/ -+ /??/atmos/mem038/** -+ /??/atmos/mem039/ -+ /??/atmos/mem039/** -+ /??/atmos/mem040/ -+ /??/atmos/mem040/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_45.list b/parm/transfer/transfer_gdas_enkf_enkf_45.list deleted file mode 100644 index fd8b1d5299..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_45.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem041/ -+ /??/atmos/mem041/** -+ /??/atmos/mem042/ -+ /??/atmos/mem042/** -+ /??/atmos/mem043/ -+ /??/atmos/mem043/** -+ /??/atmos/mem044/ -+ /??/atmos/mem044/** -+ /??/atmos/mem045/ -+ /??/atmos/mem045/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem041/ -+ /??/atmos/mem041/** -+ /??/atmos/mem042/ -+ /??/atmos/mem042/** -+ /??/atmos/mem043/ -+ /??/atmos/mem043/** -+ /??/atmos/mem044/ -+ /??/atmos/mem044/** -+ /??/atmos/mem045/ -+ /??/atmos/mem045/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_50.list b/parm/transfer/transfer_gdas_enkf_enkf_50.list deleted file mode 100644 index dd7721505b..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_50.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem046/ -+ /??/atmos/mem046/** -+ /??/atmos/mem047/ -+ /??/atmos/mem047/** -+ /??/atmos/mem048/ -+ /??/atmos/mem048/** -+ /??/atmos/mem049/ -+ /??/atmos/mem049/** -+ /??/atmos/mem050/ -+ /??/atmos/mem050/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem046/ -+ /??/atmos/mem046/** -+ /??/atmos/mem047/ -+ /??/atmos/mem047/** -+ /??/atmos/mem048/ -+ /??/atmos/mem048/** -+ /??/atmos/mem049/ -+ /??/atmos/mem049/** -+ /??/atmos/mem050/ -+ /??/atmos/mem050/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_55.list b/parm/transfer/transfer_gdas_enkf_enkf_55.list deleted file mode 100644 index 4606feb727..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_55.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem051/ -+ /??/atmos/mem051/** -+ /??/atmos/mem052/ -+ /??/atmos/mem052/** -+ /??/atmos/mem053/ -+ /??/atmos/mem053/** -+ /??/atmos/mem054/ -+ /??/atmos/mem054/** -+ /??/atmos/mem055/ -+ /??/atmos/mem055/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem051/ -+ /??/atmos/mem051/** -+ /??/atmos/mem052/ -+ /??/atmos/mem052/** -+ /??/atmos/mem053/ -+ /??/atmos/mem053/** -+ /??/atmos/mem054/ -+ /??/atmos/mem054/** -+ /??/atmos/mem055/ -+ /??/atmos/mem055/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_60.list b/parm/transfer/transfer_gdas_enkf_enkf_60.list deleted file mode 100644 index e5764082dc..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_60.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem056/ -+ /??/atmos/mem056/** -+ /??/atmos/mem057/ -+ /??/atmos/mem057/** -+ /??/atmos/mem058/ -+ /??/atmos/mem058/** -+ /??/atmos/mem059/ -+ /??/atmos/mem059/** -+ /??/atmos/mem060/ -+ /??/atmos/mem060/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem056/ -+ /??/atmos/mem056/** -+ /??/atmos/mem057/ -+ /??/atmos/mem057/** -+ /??/atmos/mem058/ -+ /??/atmos/mem058/** -+ /??/atmos/mem059/ -+ /??/atmos/mem059/** -+ /??/atmos/mem060/ -+ /??/atmos/mem060/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_65.list b/parm/transfer/transfer_gdas_enkf_enkf_65.list deleted file mode 100644 index 15e12a0660..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_65.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem061/ -+ /??/atmos/mem061/** -+ /??/atmos/mem062/ -+ /??/atmos/mem062/** -+ /??/atmos/mem063/ -+ /??/atmos/mem063/** -+ /??/atmos/mem064/ -+ /??/atmos/mem064/** -+ /??/atmos/mem065/ -+ /??/atmos/mem065/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem061/ -+ /??/atmos/mem061/** -+ /??/atmos/mem062/ -+ /??/atmos/mem062/** -+ /??/atmos/mem063/ -+ /??/atmos/mem063/** -+ /??/atmos/mem064/ -+ /??/atmos/mem064/** -+ /??/atmos/mem065/ -+ /??/atmos/mem065/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_70.list b/parm/transfer/transfer_gdas_enkf_enkf_70.list deleted file mode 100644 index 88accbffb9..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_70.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem066/ -+ /??/atmos/mem066/** -+ /??/atmos/mem067/ -+ /??/atmos/mem067/** -+ /??/atmos/mem068/ -+ /??/atmos/mem068/** -+ /??/atmos/mem069/ -+ /??/atmos/mem069/** -+ /??/atmos/mem070/ -+ /??/atmos/mem070/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem066/ -+ /??/atmos/mem066/** -+ /??/atmos/mem067/ -+ /??/atmos/mem067/** -+ /??/atmos/mem068/ -+ /??/atmos/mem068/** -+ /??/atmos/mem069/ -+ /??/atmos/mem069/** -+ /??/atmos/mem070/ -+ /??/atmos/mem070/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_75.list b/parm/transfer/transfer_gdas_enkf_enkf_75.list deleted file mode 100644 index 3db4f41a03..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_75.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem071/ -+ /??/atmos/mem071/** -+ /??/atmos/mem072/ -+ /??/atmos/mem072/** -+ /??/atmos/mem073/ -+ /??/atmos/mem073/** -+ /??/atmos/mem074/ -+ /??/atmos/mem074/** -+ /??/atmos/mem075/ -+ /??/atmos/mem075/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem071/ -+ /??/atmos/mem071/** -+ /??/atmos/mem072/ -+ /??/atmos/mem072/** -+ /??/atmos/mem073/ -+ /??/atmos/mem073/** -+ /??/atmos/mem074/ -+ /??/atmos/mem074/** -+ /??/atmos/mem075/ -+ /??/atmos/mem075/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_80.list b/parm/transfer/transfer_gdas_enkf_enkf_80.list deleted file mode 100644 index 58ca72515d..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_80.list +++ /dev/null @@ -1,61 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem076/ -+ /??/atmos/mem076/** -+ /??/atmos/mem077/ -+ /??/atmos/mem077/** -+ /??/atmos/mem078/ -+ /??/atmos/mem078/** -+ /??/atmos/mem079/ -+ /??/atmos/mem079/** -+ /??/atmos/mem080/ -+ /??/atmos/mem080/** -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/mem076/ -+ /??/atmos/mem076/** -+ /??/atmos/mem077/ -+ /??/atmos/mem077/** -+ /??/atmos/mem078/ -+ /??/atmos/mem078/** -+ /??/atmos/mem079/ -+ /??/atmos/mem079/** -+ /??/atmos/mem080/ -+ /??/atmos/mem080/** -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_enkf_enkf_misc.list b/parm/transfer/transfer_gdas_enkf_enkf_misc.list deleted file mode 100644 index 141b4af1da..0000000000 --- a/parm/transfer/transfer_gdas_enkf_enkf_misc.list +++ /dev/null @@ -1,43 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/* -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/* -- * - -B 100 - - diff --git a/parm/transfer/transfer_gdas_misc.list b/parm/transfer/transfer_gdas_misc.list deleted file mode 100644 index 3d7fe47a88..0000000000 --- a/parm/transfer/transfer_gdas_misc.list +++ /dev/null @@ -1,76 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. -#com/arch/_ENVIR_/VOS/ -#+ ship_names -#+ activeShiprev -#- * -#B 4500000 - - -_COMROOT_/gfs/_SHORTVER_/syndat/ -B 180 - -_COMROOT_/gfs/_SHORTVER_/gdascounts/ -+ /data_counts._MONPREV_/*** -- * -B 16000000 - -_COMROOT_/gfs/_SHORTVER_/gdascounts/ -+ /data_counts._MONCUR_/*** -- * -B 16000000 - -_COMROOT_/gfs/_SHORTVER_/gdascounts/ -+ /satcounts._MONPREV_/*** -- * -B 16000000 - -_COMROOT_/gfs/_SHORTVER_/gdascounts/ -+ /satcounts._MONCUR_/*** -- * -B 16000000 - -_COMROOT_/gfs/_SHORTVER_/sdm_rtdm/ -+ /obcount_30day/ -+ /obcount_30day/gdas/ -+ /obcount_30day/gdas/gdas._PDYm1_/*** -+ /obcount_30day/gdas/gdas._PDY_/*** -- * -B 2000000 - -_COMROOT_/gfs/_SHORTVER_/sdm_rtdm/ -+ /avgdata/ -+ /avgdata/obcount_30davg.gdas._MONPREV_ -+ /avgdata/obcount_30davg.gdas.current -- * -B 256000 - -_COMROOT_/gfs/_SHORTVER_/gdascounts/ -+ /index.shtml -+ /index_backup.shtml -- * -B 6 - diff --git a/parm/transfer/transfer_gfs_1.list b/parm/transfer/transfer_gfs_1.list deleted file mode 100644 index 84e852ff82..0000000000 --- a/parm/transfer/transfer_gfs_1.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -- /??/atmos/gfs.t??z.atmf???.nc -- /??/atmos/gfs.t??z.sfcf???.nc -- /??/atmos/gfs.t??z.master.* -- /??/atmos/gempak/ -- /??/atmos/gempak/* -- /??/wave/ -- /??/wave/* -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -- /??/atmos/gfs.t??z.atmf???.nc -- /??/atmos/gfs.t??z.sfcf???.nc -- /??/atmos/gfs.t??z.master.* -- /??/atmos/gempak/ -- /??/atmos/gempak/* -- /??/wave/ -- /??/wave/* -B 100 - diff --git a/parm/transfer/transfer_gfs_10a.list b/parm/transfer/transfer_gfs_10a.list deleted file mode 100644 index 3beb6d15fd..0000000000 --- a/parm/transfer/transfer_gfs_10a.list +++ /dev/null @@ -1,49 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.master.*1 -+ /??/atmos/gfs.t??z.master.*3 -+ /??/atmos/gfs.t??z.master.*5 -+ /??/atmos/gfs.t??z.master.*7 -+ /??/atmos/gfs.t??z.master.*9 -- * -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.master.*1 -+ /??/atmos/gfs.t??z.master.*3 -+ /??/atmos/gfs.t??z.master.*5 -+ /??/atmos/gfs.t??z.master.*7 -+ /??/atmos/gfs.t??z.master.*9 -- * -B 100 - - diff --git a/parm/transfer/transfer_gfs_10b.list b/parm/transfer/transfer_gfs_10b.list deleted file mode 100644 index 34522d1e2f..0000000000 --- a/parm/transfer/transfer_gfs_10b.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.master.*0 -+ /??/atmos/gfs.t??z.master.*2 -+ /??/atmos/gfs.t??z.master.*4 -+ /??/atmos/gfs.t??z.master.*6 -+ /??/atmos/gfs.t??z.master.*8 -- * -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.master.*0 -+ /??/atmos/gfs.t??z.master.*2 -+ /??/atmos/gfs.t??z.master.*4 -+ /??/atmos/gfs.t??z.master.*6 -+ /??/atmos/gfs.t??z.master.*8 -- * - -B 100 - - diff --git a/parm/transfer/transfer_gfs_2.list b/parm/transfer/transfer_gfs_2.list deleted file mode 100644 index f0ea9bc9c5..0000000000 --- a/parm/transfer/transfer_gfs_2.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf000.nc -+ /??/atmos/gfs.t??z.atmf007.nc -+ /??/atmos/gfs.t??z.atmf014.nc -+ /??/atmos/gfs.t??z.atmf021.nc -+ /??/atmos/gfs.t??z.atmf028.nc -+ /??/atmos/gfs.t??z.atmf035.nc -+ /??/atmos/gfs.t??z.atmf042.nc -+ /??/atmos/gfs.t??z.atmf049.nc -+ /??/atmos/gfs.t??z.atmf056.nc -+ /??/atmos/gfs.t??z.atmf063.nc -+ /??/atmos/gfs.t??z.atmf070.nc -+ /??/atmos/gfs.t??z.atmf077.nc -+ /??/atmos/gfs.t??z.atmf084.nc -+ /??/atmos/gfs.t??z.atmf091.nc -+ /??/atmos/gfs.t??z.atmf098.nc -+ /??/atmos/gfs.t??z.atmf105.nc -+ /??/atmos/gfs.t??z.atmf112.nc -+ /??/atmos/gfs.t??z.atmf119.nc -+ /??/atmos/gfs.t??z.atmf138.nc -+ /??/atmos/gfs.t??z.atmf159.nc -+ /??/atmos/gfs.t??z.atmf180.nc -+ /??/atmos/gfs.t??z.atmf201.nc -+ /??/atmos/gfs.t??z.atmf222.nc -+ /??/atmos/gfs.t??z.atmf243.nc -+ /??/atmos/gfs.t??z.atmf264.nc -+ /??/atmos/gfs.t??z.atmf285.nc -+ /??/atmos/gfs.t??z.atmf306.nc -+ /??/atmos/gfs.t??z.atmf327.nc -+ /??/atmos/gfs.t??z.atmf348.nc -+ /??/atmos/gfs.t??z.atmf369.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf000.nc -+ /??/atmos/gfs.t??z.atmf007.nc -+ /??/atmos/gfs.t??z.atmf014.nc -+ /??/atmos/gfs.t??z.atmf021.nc -+ /??/atmos/gfs.t??z.atmf028.nc -+ /??/atmos/gfs.t??z.atmf035.nc -+ /??/atmos/gfs.t??z.atmf042.nc -+ /??/atmos/gfs.t??z.atmf049.nc -+ /??/atmos/gfs.t??z.atmf056.nc -+ /??/atmos/gfs.t??z.atmf063.nc -+ /??/atmos/gfs.t??z.atmf070.nc -+ /??/atmos/gfs.t??z.atmf077.nc -+ /??/atmos/gfs.t??z.atmf084.nc -+ /??/atmos/gfs.t??z.atmf091.nc -+ /??/atmos/gfs.t??z.atmf098.nc -+ /??/atmos/gfs.t??z.atmf105.nc -+ /??/atmos/gfs.t??z.atmf112.nc -+ /??/atmos/gfs.t??z.atmf119.nc -+ /??/atmos/gfs.t??z.atmf138.nc -+ /??/atmos/gfs.t??z.atmf159.nc -+ /??/atmos/gfs.t??z.atmf180.nc -+ /??/atmos/gfs.t??z.atmf201.nc -+ /??/atmos/gfs.t??z.atmf222.nc -+ /??/atmos/gfs.t??z.atmf243.nc -+ /??/atmos/gfs.t??z.atmf264.nc -+ /??/atmos/gfs.t??z.atmf285.nc -+ /??/atmos/gfs.t??z.atmf306.nc -+ /??/atmos/gfs.t??z.atmf327.nc -+ /??/atmos/gfs.t??z.atmf348.nc -+ /??/atmos/gfs.t??z.atmf369.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_3.list b/parm/transfer/transfer_gfs_3.list deleted file mode 100644 index 636077381e..0000000000 --- a/parm/transfer/transfer_gfs_3.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf001.nc -+ /??/atmos/gfs.t??z.atmf008.nc -+ /??/atmos/gfs.t??z.atmf015.nc -+ /??/atmos/gfs.t??z.atmf022.nc -+ /??/atmos/gfs.t??z.atmf029.nc -+ /??/atmos/gfs.t??z.atmf036.nc -+ /??/atmos/gfs.t??z.atmf043.nc -+ /??/atmos/gfs.t??z.atmf050.nc -+ /??/atmos/gfs.t??z.atmf057.nc -+ /??/atmos/gfs.t??z.atmf064.nc -+ /??/atmos/gfs.t??z.atmf071.nc -+ /??/atmos/gfs.t??z.atmf078.nc -+ /??/atmos/gfs.t??z.atmf085.nc -+ /??/atmos/gfs.t??z.atmf092.nc -+ /??/atmos/gfs.t??z.atmf099.nc -+ /??/atmos/gfs.t??z.atmf106.nc -+ /??/atmos/gfs.t??z.atmf113.nc -+ /??/atmos/gfs.t??z.atmf120.nc -+ /??/atmos/gfs.t??z.atmf141.nc -+ /??/atmos/gfs.t??z.atmf162.nc -+ /??/atmos/gfs.t??z.atmf183.nc -+ /??/atmos/gfs.t??z.atmf204.nc -+ /??/atmos/gfs.t??z.atmf225.nc -+ /??/atmos/gfs.t??z.atmf246.nc -+ /??/atmos/gfs.t??z.atmf267.nc -+ /??/atmos/gfs.t??z.atmf288.nc -+ /??/atmos/gfs.t??z.atmf309.nc -+ /??/atmos/gfs.t??z.atmf330.nc -+ /??/atmos/gfs.t??z.atmf351.nc -+ /??/atmos/gfs.t??z.atmf372.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf001.nc -+ /??/atmos/gfs.t??z.atmf008.nc -+ /??/atmos/gfs.t??z.atmf015.nc -+ /??/atmos/gfs.t??z.atmf022.nc -+ /??/atmos/gfs.t??z.atmf029.nc -+ /??/atmos/gfs.t??z.atmf036.nc -+ /??/atmos/gfs.t??z.atmf043.nc -+ /??/atmos/gfs.t??z.atmf050.nc -+ /??/atmos/gfs.t??z.atmf057.nc -+ /??/atmos/gfs.t??z.atmf064.nc -+ /??/atmos/gfs.t??z.atmf071.nc -+ /??/atmos/gfs.t??z.atmf078.nc -+ /??/atmos/gfs.t??z.atmf085.nc -+ /??/atmos/gfs.t??z.atmf092.nc -+ /??/atmos/gfs.t??z.atmf099.nc -+ /??/atmos/gfs.t??z.atmf106.nc -+ /??/atmos/gfs.t??z.atmf113.nc -+ /??/atmos/gfs.t??z.atmf120.nc -+ /??/atmos/gfs.t??z.atmf141.nc -+ /??/atmos/gfs.t??z.atmf162.nc -+ /??/atmos/gfs.t??z.atmf183.nc -+ /??/atmos/gfs.t??z.atmf204.nc -+ /??/atmos/gfs.t??z.atmf225.nc -+ /??/atmos/gfs.t??z.atmf246.nc -+ /??/atmos/gfs.t??z.atmf267.nc -+ /??/atmos/gfs.t??z.atmf288.nc -+ /??/atmos/gfs.t??z.atmf309.nc -+ /??/atmos/gfs.t??z.atmf330.nc -+ /??/atmos/gfs.t??z.atmf351.nc -+ /??/atmos/gfs.t??z.atmf372.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_4.list b/parm/transfer/transfer_gfs_4.list deleted file mode 100644 index b45e4027ff..0000000000 --- a/parm/transfer/transfer_gfs_4.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf002.nc -+ /??/atmos/gfs.t??z.atmf009.nc -+ /??/atmos/gfs.t??z.atmf016.nc -+ /??/atmos/gfs.t??z.atmf023.nc -+ /??/atmos/gfs.t??z.atmf030.nc -+ /??/atmos/gfs.t??z.atmf037.nc -+ /??/atmos/gfs.t??z.atmf044.nc -+ /??/atmos/gfs.t??z.atmf051.nc -+ /??/atmos/gfs.t??z.atmf058.nc -+ /??/atmos/gfs.t??z.atmf065.nc -+ /??/atmos/gfs.t??z.atmf072.nc -+ /??/atmos/gfs.t??z.atmf079.nc -+ /??/atmos/gfs.t??z.atmf086.nc -+ /??/atmos/gfs.t??z.atmf093.nc -+ /??/atmos/gfs.t??z.atmf100.nc -+ /??/atmos/gfs.t??z.atmf107.nc -+ /??/atmos/gfs.t??z.atmf114.nc -+ /??/atmos/gfs.t??z.atmf123.nc -+ /??/atmos/gfs.t??z.atmf144.nc -+ /??/atmos/gfs.t??z.atmf165.nc -+ /??/atmos/gfs.t??z.atmf186.nc -+ /??/atmos/gfs.t??z.atmf207.nc -+ /??/atmos/gfs.t??z.atmf228.nc -+ /??/atmos/gfs.t??z.atmf249.nc -+ /??/atmos/gfs.t??z.atmf270.nc -+ /??/atmos/gfs.t??z.atmf291.nc -+ /??/atmos/gfs.t??z.atmf312.nc -+ /??/atmos/gfs.t??z.atmf333.nc -+ /??/atmos/gfs.t??z.atmf354.nc -+ /??/atmos/gfs.t??z.atmf375.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf002.nc -+ /??/atmos/gfs.t??z.atmf009.nc -+ /??/atmos/gfs.t??z.atmf016.nc -+ /??/atmos/gfs.t??z.atmf023.nc -+ /??/atmos/gfs.t??z.atmf030.nc -+ /??/atmos/gfs.t??z.atmf037.nc -+ /??/atmos/gfs.t??z.atmf044.nc -+ /??/atmos/gfs.t??z.atmf051.nc -+ /??/atmos/gfs.t??z.atmf058.nc -+ /??/atmos/gfs.t??z.atmf065.nc -+ /??/atmos/gfs.t??z.atmf072.nc -+ /??/atmos/gfs.t??z.atmf079.nc -+ /??/atmos/gfs.t??z.atmf086.nc -+ /??/atmos/gfs.t??z.atmf093.nc -+ /??/atmos/gfs.t??z.atmf100.nc -+ /??/atmos/gfs.t??z.atmf107.nc -+ /??/atmos/gfs.t??z.atmf114.nc -+ /??/atmos/gfs.t??z.atmf123.nc -+ /??/atmos/gfs.t??z.atmf144.nc -+ /??/atmos/gfs.t??z.atmf165.nc -+ /??/atmos/gfs.t??z.atmf186.nc -+ /??/atmos/gfs.t??z.atmf207.nc -+ /??/atmos/gfs.t??z.atmf228.nc -+ /??/atmos/gfs.t??z.atmf249.nc -+ /??/atmos/gfs.t??z.atmf270.nc -+ /??/atmos/gfs.t??z.atmf291.nc -+ /??/atmos/gfs.t??z.atmf312.nc -+ /??/atmos/gfs.t??z.atmf333.nc -+ /??/atmos/gfs.t??z.atmf354.nc -+ /??/atmos/gfs.t??z.atmf375.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_5.list b/parm/transfer/transfer_gfs_5.list deleted file mode 100644 index 21f59df4f8..0000000000 --- a/parm/transfer/transfer_gfs_5.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf003.nc -+ /??/atmos/gfs.t??z.atmf010.nc -+ /??/atmos/gfs.t??z.atmf017.nc -+ /??/atmos/gfs.t??z.atmf024.nc -+ /??/atmos/gfs.t??z.atmf031.nc -+ /??/atmos/gfs.t??z.atmf038.nc -+ /??/atmos/gfs.t??z.atmf045.nc -+ /??/atmos/gfs.t??z.atmf052.nc -+ /??/atmos/gfs.t??z.atmf059.nc -+ /??/atmos/gfs.t??z.atmf066.nc -+ /??/atmos/gfs.t??z.atmf073.nc -+ /??/atmos/gfs.t??z.atmf080.nc -+ /??/atmos/gfs.t??z.atmf087.nc -+ /??/atmos/gfs.t??z.atmf094.nc -+ /??/atmos/gfs.t??z.atmf101.nc -+ /??/atmos/gfs.t??z.atmf108.nc -+ /??/atmos/gfs.t??z.atmf115.nc -+ /??/atmos/gfs.t??z.atmf126.nc -+ /??/atmos/gfs.t??z.atmf147.nc -+ /??/atmos/gfs.t??z.atmf168.nc -+ /??/atmos/gfs.t??z.atmf189.nc -+ /??/atmos/gfs.t??z.atmf210.nc -+ /??/atmos/gfs.t??z.atmf231.nc -+ /??/atmos/gfs.t??z.atmf252.nc -+ /??/atmos/gfs.t??z.atmf273.nc -+ /??/atmos/gfs.t??z.atmf294.nc -+ /??/atmos/gfs.t??z.atmf315.nc -+ /??/atmos/gfs.t??z.atmf336.nc -+ /??/atmos/gfs.t??z.atmf357.nc -+ /??/atmos/gfs.t??z.atmf378.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf003.nc -+ /??/atmos/gfs.t??z.atmf010.nc -+ /??/atmos/gfs.t??z.atmf017.nc -+ /??/atmos/gfs.t??z.atmf024.nc -+ /??/atmos/gfs.t??z.atmf031.nc -+ /??/atmos/gfs.t??z.atmf038.nc -+ /??/atmos/gfs.t??z.atmf045.nc -+ /??/atmos/gfs.t??z.atmf052.nc -+ /??/atmos/gfs.t??z.atmf059.nc -+ /??/atmos/gfs.t??z.atmf066.nc -+ /??/atmos/gfs.t??z.atmf073.nc -+ /??/atmos/gfs.t??z.atmf080.nc -+ /??/atmos/gfs.t??z.atmf087.nc -+ /??/atmos/gfs.t??z.atmf094.nc -+ /??/atmos/gfs.t??z.atmf101.nc -+ /??/atmos/gfs.t??z.atmf108.nc -+ /??/atmos/gfs.t??z.atmf115.nc -+ /??/atmos/gfs.t??z.atmf126.nc -+ /??/atmos/gfs.t??z.atmf147.nc -+ /??/atmos/gfs.t??z.atmf168.nc -+ /??/atmos/gfs.t??z.atmf189.nc -+ /??/atmos/gfs.t??z.atmf210.nc -+ /??/atmos/gfs.t??z.atmf231.nc -+ /??/atmos/gfs.t??z.atmf252.nc -+ /??/atmos/gfs.t??z.atmf273.nc -+ /??/atmos/gfs.t??z.atmf294.nc -+ /??/atmos/gfs.t??z.atmf315.nc -+ /??/atmos/gfs.t??z.atmf336.nc -+ /??/atmos/gfs.t??z.atmf357.nc -+ /??/atmos/gfs.t??z.atmf378.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_6.list b/parm/transfer/transfer_gfs_6.list deleted file mode 100644 index 5e90f975fc..0000000000 --- a/parm/transfer/transfer_gfs_6.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf004.nc -+ /??/atmos/gfs.t??z.atmf011.nc -+ /??/atmos/gfs.t??z.atmf018.nc -+ /??/atmos/gfs.t??z.atmf025.nc -+ /??/atmos/gfs.t??z.atmf032.nc -+ /??/atmos/gfs.t??z.atmf039.nc -+ /??/atmos/gfs.t??z.atmf046.nc -+ /??/atmos/gfs.t??z.atmf053.nc -+ /??/atmos/gfs.t??z.atmf060.nc -+ /??/atmos/gfs.t??z.atmf067.nc -+ /??/atmos/gfs.t??z.atmf074.nc -+ /??/atmos/gfs.t??z.atmf081.nc -+ /??/atmos/gfs.t??z.atmf088.nc -+ /??/atmos/gfs.t??z.atmf095.nc -+ /??/atmos/gfs.t??z.atmf102.nc -+ /??/atmos/gfs.t??z.atmf109.nc -+ /??/atmos/gfs.t??z.atmf116.nc -+ /??/atmos/gfs.t??z.atmf129.nc -+ /??/atmos/gfs.t??z.atmf150.nc -+ /??/atmos/gfs.t??z.atmf171.nc -+ /??/atmos/gfs.t??z.atmf192.nc -+ /??/atmos/gfs.t??z.atmf213.nc -+ /??/atmos/gfs.t??z.atmf234.nc -+ /??/atmos/gfs.t??z.atmf255.nc -+ /??/atmos/gfs.t??z.atmf276.nc -+ /??/atmos/gfs.t??z.atmf297.nc -+ /??/atmos/gfs.t??z.atmf318.nc -+ /??/atmos/gfs.t??z.atmf339.nc -+ /??/atmos/gfs.t??z.atmf360.nc -+ /??/atmos/gfs.t??z.atmf381.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf004.nc -+ /??/atmos/gfs.t??z.atmf011.nc -+ /??/atmos/gfs.t??z.atmf018.nc -+ /??/atmos/gfs.t??z.atmf025.nc -+ /??/atmos/gfs.t??z.atmf032.nc -+ /??/atmos/gfs.t??z.atmf039.nc -+ /??/atmos/gfs.t??z.atmf046.nc -+ /??/atmos/gfs.t??z.atmf053.nc -+ /??/atmos/gfs.t??z.atmf060.nc -+ /??/atmos/gfs.t??z.atmf067.nc -+ /??/atmos/gfs.t??z.atmf074.nc -+ /??/atmos/gfs.t??z.atmf081.nc -+ /??/atmos/gfs.t??z.atmf088.nc -+ /??/atmos/gfs.t??z.atmf095.nc -+ /??/atmos/gfs.t??z.atmf102.nc -+ /??/atmos/gfs.t??z.atmf109.nc -+ /??/atmos/gfs.t??z.atmf116.nc -+ /??/atmos/gfs.t??z.atmf129.nc -+ /??/atmos/gfs.t??z.atmf150.nc -+ /??/atmos/gfs.t??z.atmf171.nc -+ /??/atmos/gfs.t??z.atmf192.nc -+ /??/atmos/gfs.t??z.atmf213.nc -+ /??/atmos/gfs.t??z.atmf234.nc -+ /??/atmos/gfs.t??z.atmf255.nc -+ /??/atmos/gfs.t??z.atmf276.nc -+ /??/atmos/gfs.t??z.atmf297.nc -+ /??/atmos/gfs.t??z.atmf318.nc -+ /??/atmos/gfs.t??z.atmf339.nc -+ /??/atmos/gfs.t??z.atmf360.nc -+ /??/atmos/gfs.t??z.atmf381.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_7.list b/parm/transfer/transfer_gfs_7.list deleted file mode 100644 index e3b8dad532..0000000000 --- a/parm/transfer/transfer_gfs_7.list +++ /dev/null @@ -1,99 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf005.nc -+ /??/atmos/gfs.t??z.atmf012.nc -+ /??/atmos/gfs.t??z.atmf019.nc -+ /??/atmos/gfs.t??z.atmf026.nc -+ /??/atmos/gfs.t??z.atmf033.nc -+ /??/atmos/gfs.t??z.atmf040.nc -+ /??/atmos/gfs.t??z.atmf047.nc -+ /??/atmos/gfs.t??z.atmf054.nc -+ /??/atmos/gfs.t??z.atmf061.nc -+ /??/atmos/gfs.t??z.atmf068.nc -+ /??/atmos/gfs.t??z.atmf075.nc -+ /??/atmos/gfs.t??z.atmf082.nc -+ /??/atmos/gfs.t??z.atmf089.nc -+ /??/atmos/gfs.t??z.atmf096.nc -+ /??/atmos/gfs.t??z.atmf103.nc -+ /??/atmos/gfs.t??z.atmf110.nc -+ /??/atmos/gfs.t??z.atmf117.nc -+ /??/atmos/gfs.t??z.atmf132.nc -+ /??/atmos/gfs.t??z.atmf153.nc -+ /??/atmos/gfs.t??z.atmf174.nc -+ /??/atmos/gfs.t??z.atmf195.nc -+ /??/atmos/gfs.t??z.atmf216.nc -+ /??/atmos/gfs.t??z.atmf237.nc -+ /??/atmos/gfs.t??z.atmf258.nc -+ /??/atmos/gfs.t??z.atmf279.nc -+ /??/atmos/gfs.t??z.atmf300.nc -+ /??/atmos/gfs.t??z.atmf321.nc -+ /??/atmos/gfs.t??z.atmf342.nc -+ /??/atmos/gfs.t??z.atmf363.nc -+ /??/atmos/gfs.t??z.atmf384.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf005.nc -+ /??/atmos/gfs.t??z.atmf012.nc -+ /??/atmos/gfs.t??z.atmf019.nc -+ /??/atmos/gfs.t??z.atmf026.nc -+ /??/atmos/gfs.t??z.atmf033.nc -+ /??/atmos/gfs.t??z.atmf040.nc -+ /??/atmos/gfs.t??z.atmf047.nc -+ /??/atmos/gfs.t??z.atmf054.nc -+ /??/atmos/gfs.t??z.atmf061.nc -+ /??/atmos/gfs.t??z.atmf068.nc -+ /??/atmos/gfs.t??z.atmf075.nc -+ /??/atmos/gfs.t??z.atmf082.nc -+ /??/atmos/gfs.t??z.atmf089.nc -+ /??/atmos/gfs.t??z.atmf096.nc -+ /??/atmos/gfs.t??z.atmf103.nc -+ /??/atmos/gfs.t??z.atmf110.nc -+ /??/atmos/gfs.t??z.atmf117.nc -+ /??/atmos/gfs.t??z.atmf132.nc -+ /??/atmos/gfs.t??z.atmf153.nc -+ /??/atmos/gfs.t??z.atmf174.nc -+ /??/atmos/gfs.t??z.atmf195.nc -+ /??/atmos/gfs.t??z.atmf216.nc -+ /??/atmos/gfs.t??z.atmf237.nc -+ /??/atmos/gfs.t??z.atmf258.nc -+ /??/atmos/gfs.t??z.atmf279.nc -+ /??/atmos/gfs.t??z.atmf300.nc -+ /??/atmos/gfs.t??z.atmf321.nc -+ /??/atmos/gfs.t??z.atmf342.nc -+ /??/atmos/gfs.t??z.atmf363.nc -+ /??/atmos/gfs.t??z.atmf384.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_8.list b/parm/transfer/transfer_gfs_8.list deleted file mode 100644 index df146fd207..0000000000 --- a/parm/transfer/transfer_gfs_8.list +++ /dev/null @@ -1,97 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf006.nc -+ /??/atmos/gfs.t??z.atmf013.nc -+ /??/atmos/gfs.t??z.atmf020.nc -+ /??/atmos/gfs.t??z.atmf027.nc -+ /??/atmos/gfs.t??z.atmf034.nc -+ /??/atmos/gfs.t??z.atmf041.nc -+ /??/atmos/gfs.t??z.atmf048.nc -+ /??/atmos/gfs.t??z.atmf055.nc -+ /??/atmos/gfs.t??z.atmf062.nc -+ /??/atmos/gfs.t??z.atmf069.nc -+ /??/atmos/gfs.t??z.atmf076.nc -+ /??/atmos/gfs.t??z.atmf083.nc -+ /??/atmos/gfs.t??z.atmf090.nc -+ /??/atmos/gfs.t??z.atmf097.nc -+ /??/atmos/gfs.t??z.atmf104.nc -+ /??/atmos/gfs.t??z.atmf111.nc -+ /??/atmos/gfs.t??z.atmf118.nc -+ /??/atmos/gfs.t??z.atmf135.nc -+ /??/atmos/gfs.t??z.atmf156.nc -+ /??/atmos/gfs.t??z.atmf177.nc -+ /??/atmos/gfs.t??z.atmf198.nc -+ /??/atmos/gfs.t??z.atmf219.nc -+ /??/atmos/gfs.t??z.atmf240.nc -+ /??/atmos/gfs.t??z.atmf261.nc -+ /??/atmos/gfs.t??z.atmf282.nc -+ /??/atmos/gfs.t??z.atmf303.nc -+ /??/atmos/gfs.t??z.atmf324.nc -+ /??/atmos/gfs.t??z.atmf345.nc -+ /??/atmos/gfs.t??z.atmf366.nc -- * -B 100 - - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.atmf006.nc -+ /??/atmos/gfs.t??z.atmf013.nc -+ /??/atmos/gfs.t??z.atmf020.nc -+ /??/atmos/gfs.t??z.atmf027.nc -+ /??/atmos/gfs.t??z.atmf034.nc -+ /??/atmos/gfs.t??z.atmf041.nc -+ /??/atmos/gfs.t??z.atmf048.nc -+ /??/atmos/gfs.t??z.atmf055.nc -+ /??/atmos/gfs.t??z.atmf062.nc -+ /??/atmos/gfs.t??z.atmf069.nc -+ /??/atmos/gfs.t??z.atmf076.nc -+ /??/atmos/gfs.t??z.atmf083.nc -+ /??/atmos/gfs.t??z.atmf090.nc -+ /??/atmos/gfs.t??z.atmf097.nc -+ /??/atmos/gfs.t??z.atmf104.nc -+ /??/atmos/gfs.t??z.atmf111.nc -+ /??/atmos/gfs.t??z.atmf118.nc -+ /??/atmos/gfs.t??z.atmf135.nc -+ /??/atmos/gfs.t??z.atmf156.nc -+ /??/atmos/gfs.t??z.atmf177.nc -+ /??/atmos/gfs.t??z.atmf198.nc -+ /??/atmos/gfs.t??z.atmf219.nc -+ /??/atmos/gfs.t??z.atmf240.nc -+ /??/atmos/gfs.t??z.atmf261.nc -+ /??/atmos/gfs.t??z.atmf282.nc -+ /??/atmos/gfs.t??z.atmf303.nc -+ /??/atmos/gfs.t??z.atmf324.nc -+ /??/atmos/gfs.t??z.atmf345.nc -+ /??/atmos/gfs.t??z.atmf366.nc -- * -B 100 - diff --git a/parm/transfer/transfer_gfs_9a.list b/parm/transfer/transfer_gfs_9a.list deleted file mode 100644 index 44d316c81e..0000000000 --- a/parm/transfer/transfer_gfs_9a.list +++ /dev/null @@ -1,51 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.sfcf??0.nc -+ /??/atmos/gfs.t??z.sfcf??2.nc -+ /??/atmos/gfs.t??z.sfcf??4.nc -+ /??/atmos/gfs.t??z.sfcf??6.nc -+ /??/atmos/gfs.t??z.sfcf??8.nc -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.sfcf??0.nc -+ /??/atmos/gfs.t??z.sfcf??2.nc -+ /??/atmos/gfs.t??z.sfcf??4.nc -+ /??/atmos/gfs.t??z.sfcf??6.nc -+ /??/atmos/gfs.t??z.sfcf??8.nc -- * - -B 100 - - diff --git a/parm/transfer/transfer_gfs_9b.list b/parm/transfer/transfer_gfs_9b.list deleted file mode 100644 index b2571dfb7c..0000000000 --- a/parm/transfer/transfer_gfs_9b.list +++ /dev/null @@ -1,51 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.sfcf??1.nc -+ /??/atmos/gfs.t??z.sfcf??3.nc -+ /??/atmos/gfs.t??z.sfcf??5.nc -+ /??/atmos/gfs.t??z.sfcf??7.nc -+ /??/atmos/gfs.t??z.sfcf??9.nc -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.sfcf??1.nc -+ /??/atmos/gfs.t??z.sfcf??3.nc -+ /??/atmos/gfs.t??z.sfcf??5.nc -+ /??/atmos/gfs.t??z.sfcf??7.nc -+ /??/atmos/gfs.t??z.sfcf??9.nc -- * - -B 100 - - diff --git a/parm/transfer/transfer_gfs_gempak.list b/parm/transfer/transfer_gfs_gempak.list deleted file mode 100644 index e491821d69..0000000000 --- a/parm/transfer/transfer_gfs_gempak.list +++ /dev/null @@ -1,45 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gempak/ -+ /??/atmos/gempak/* -- * - -B 100 - -_COMROOT_/gfs/_SHORTVER_/gfs._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gempak/ -+ /??/atmos/gempak/* -- * - -B 100 - - diff --git a/parm/transfer/transfer_gfs_misc.list b/parm/transfer/transfer_gfs_misc.list deleted file mode 100644 index 32f002d1e7..0000000000 --- a/parm/transfer/transfer_gfs_misc.list +++ /dev/null @@ -1,43 +0,0 @@ -# This file specifies the directories to be tranatmfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the tranatmfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# tranatmferred. - -_COMROOT_/gfs/_SHORTVER_/sdm_rtdm/ -+ /avgdata/ -+ /avgdata/obcount_30davg.gfs._MONPREV_ -+ /avgdata/obcount_30davg.gfs.current -- * -B 256000 - - -_COMROOT_/gfs/_SHORTVER_/sdm_rtdm/ -+ /obcount_30day/ -+ /obcount_30day/gfs/ -+ /obcount_30day/gfs/gfs._PDYm1_/*** -+ /obcount_30day/gfs/gfs._PDY_/*** -- * -B 2000000 - - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_1.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_1.list deleted file mode 100644 index aae14dc120..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_1.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.atmf006.nc -+ /00/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.atmf006.nc -+ /00/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_2.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_2.list deleted file mode 100644 index 1cf3b8f5e4..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_2.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.atmf006.nc -+ /06/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.atmf006.nc -+ /06/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_3.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_3.list deleted file mode 100644 index ee0dae4c34..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_3.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.atmf006.nc -+ /12/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.atmf006.nc -+ /12/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_4.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_4.list deleted file mode 100644 index 29f1a601d1..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_4.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.atmf006.nc -+ /18/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.atmf006.nc -+ /18/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_5.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_5.list deleted file mode 100644 index 7d1dd9ff6a..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_5.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.ratminc.nc -+ /00/atmos/gdas.t??z.atmf006.ensmean.nc -+ /00/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.ratminc.nc -+ /00/atmos/gdas.t??z.atmf006.ensmean.nc -+ /00/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_6.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_6.list deleted file mode 100644 index 124dbe3aad..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_6.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.ratminc.nc -+ /06/atmos/gdas.t??z.atmf006.ensmean.nc -+ /06/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.ratminc.nc -+ /06/atmos/gdas.t??z.atmf006.ensmean.nc -+ /06/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_7.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_7.list deleted file mode 100644 index 58ff55b5d6..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_7.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.ratminc.nc -+ /12/atmos/gdas.t??z.atmf006.ensmean.nc -+ /12/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.ratminc.nc -+ /12/atmos/gdas.t??z.atmf006.ensmean.nc -+ /12/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_8.list b/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_8.list deleted file mode 100644 index 99d3de2843..0000000000 --- a/parm/transfer/transfer_rdhpcs_enkfgdas_enkf_8.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.ratminc.nc -+ /18/atmos/gdas.t??z.atmf006.ensmean.nc -+ /18/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.ratminc.nc -+ /18/atmos/gdas.t??z.atmf006.ensmean.nc -+ /18/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas.list b/parm/transfer/transfer_rdhpcs_gdas.list deleted file mode 100644 index a154b022ed..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas.list +++ /dev/null @@ -1,70 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -_COMROOT_/gfs/_SHORTVER_/gdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/gdas._PDYm1_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gdas.t??z*tcvitals* -+ /??/atmos/gdas.*bufr* -+ /??/atmos/gdas.t??z.abias_pc -+ /??/atmos/gdas.t??z.abias_air -+ /??/atmos/gdas.t??z.abias -+ /??/atmos/gdas.t??z.sfcf*.nc -+ /??/atmos/gdas.t??z.engicegrb -+ /??/atmos/gdas.t??z.atmf0*.nc -+ /??/atmos/gdas.t??z.radstat -+ /??/atmos/gdas.t??z.atmanl.nc -+ /??/atmos/gdas.t??z.atmges.nc -+ /??/atmos/gdas.t??z.atmgm3.nc -+ /??/atmos/gdas.t??z.atmgp3.nc -+ /??/atmos/gdas.t??z.sfcanl.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/gdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/gdas._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gdas.t??z*tcvitals* -+ /??/atmos/gdas.*bufr* -+ /??/atmos/gdas.t??z.abias_pc -+ /??/atmos/gdas.t??z.abias_air -+ /??/atmos/gdas.t??z.abias -+ /??/atmos/gdas.t??z.sfcf*.nc -+ /??/atmos/gdas.t??z.engicegrb -+ /??/atmos/gdas.t??z.atmf0*.nc -+ /??/atmos/gdas.t??z.radstat -+ /??/atmos/gdas.t??z.atmanl.nc -+ /??/atmos/gdas.t??z.atmges.nc -+ /??/atmos/gdas.t??z.atmgm3.nc -+ /??/atmos/gdas.t??z.atmgp3.nc -+ /??/atmos/gdas.t??z.sfcanl.nc -+ /??/atmos/gdas.t??z.sstgrb -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_1.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_1.list deleted file mode 100644 index aae14dc120..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_1.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.atmf006.nc -+ /00/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.atmf006.nc -+ /00/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_2.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_2.list deleted file mode 100644 index 1cf3b8f5e4..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_2.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.atmf006.nc -+ /06/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.atmf006.nc -+ /06/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_3.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_3.list deleted file mode 100644 index ee0dae4c34..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_3.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.atmf006.nc -+ /12/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.atmf006.nc -+ /12/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_4.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_4.list deleted file mode 100644 index 29f1a601d1..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_4.list +++ /dev/null @@ -1,50 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.atmf006.nc -+ /18/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.atmf006.nc -+ /18/atmos/mem???/gdas.t??z.atmf009.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_5.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_5.list deleted file mode 100644 index 7d1dd9ff6a..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_5.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.ratminc.nc -+ /00/atmos/gdas.t??z.atmf006.ensmean.nc -+ /00/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /00/ -+ /00/atmos/ -+ /00/atmos/mem???/ -+ /00/atmos/mem???/gdas.t??z.ratminc.nc -+ /00/atmos/gdas.t??z.atmf006.ensmean.nc -+ /00/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_6.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_6.list deleted file mode 100644 index 124dbe3aad..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_6.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.ratminc.nc -+ /06/atmos/gdas.t??z.atmf006.ensmean.nc -+ /06/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /06/ -+ /06/atmos/ -+ /06/atmos/mem???/ -+ /06/atmos/mem???/gdas.t??z.ratminc.nc -+ /06/atmos/gdas.t??z.atmf006.ensmean.nc -+ /06/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_7.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_7.list deleted file mode 100644 index 58ff55b5d6..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_7.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.ratminc.nc -+ /12/atmos/gdas.t??z.atmf006.ensmean.nc -+ /12/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /12/ -+ /12/atmos/ -+ /12/atmos/mem???/ -+ /12/atmos/mem???/gdas.t??z.ratminc.nc -+ /12/atmos/gdas.t??z.atmf006.ensmean.nc -+ /12/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_8.list b/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_8.list deleted file mode 100644 index 99d3de2843..0000000000 --- a/parm/transfer/transfer_rdhpcs_gdas_enkf_enkf_8.list +++ /dev/null @@ -1,52 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -# This directory is a good candidate for compression -#Z - -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDYm1_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDYm1_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.ratminc.nc -+ /18/atmos/gdas.t??z.atmf006.ensmean.nc -+ /18/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z -_COMROOT_/gfs/_SHORTVER_/enkfgdas._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/enkfgdas._PDY_/ -+ /18/ -+ /18/atmos/ -+ /18/atmos/mem???/ -+ /18/atmos/mem???/gdas.t??z.ratminc.nc -+ /18/atmos/gdas.t??z.atmf006.ensmean.nc -+ /18/atmos/gdas.t??z.atmf009.ensmean.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gfs.list b/parm/transfer/transfer_rdhpcs_gfs.list deleted file mode 100644 index 78eedd1f24..0000000000 --- a/parm/transfer/transfer_rdhpcs_gfs.list +++ /dev/null @@ -1,69 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ _REMOTEPATH_/com/gfs/_ENVIR_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gfs.t??z.*bufr* -+ /??/atmos/gfs.t??z.engicegrb -+ /??/atmos/gfs.t??z.*tcvitals*tm00 -+ /??/atmos/gfs.t??z.atmanl.nc -+ /??/atmos/gfs.t??z.sfcanl.nc -+ /??/atmos/gfs.t??z.master.grb2f* -+ /??/atmos/gfs.t??z.pgrb2.0p25.f* -+ /??/atmos/gfs.t??z.sfluxgrbf* -+ /??/atmos/gfs.t??z.gcip.f00.grib2 -+ /??/atmos/gfs.t??z.atmf000.nc -+ /??/atmos/gfs.t??z.atmf003.nc -+ /??/atmos/gfs.t??z.atmf006.nc -+ /??/atmos/gfs.t??z.atmf009.nc -+ /??/atmos/gfs.t??z.atmf012.nc -+ /??/atmos/gfs.t??z.atmf015.nc -+ /??/atmos/gfs.t??z.atmf018.nc -+ /??/atmos/gfs.t??z.atmf021.nc -+ /??/atmos/gfs.t??z.atmf024.nc -+ /??/atmos/gfs.t??z.atmf027.nc -+ /??/atmos/gfs.t??z.atmf030.nc -+ /??/atmos/gfs.t??z.atmf033.nc -+ /??/atmos/gfs.t??z.atmf036.nc -+ /??/atmos/gfs.t??z.atmf039.nc -+ /??/atmos/gfs.t??z.atmf042.nc -+ /??/atmos/gfs.t??z.atmf045.nc -+ /??/atmos/gfs.t??z.atmf048.nc -+ /??/atmos/gfs.t??z.sfcf024.nc -+ /??/atmos/gfs.t??z.sfcf027.nc -+ /??/atmos/gfs.t??z.sfcf030.nc -+ /??/atmos/gfs.t??z.sfcf033.nc -+ /??/atmos/gfs.t??z.sfcf036.nc -+ /??/atmos/gfs.t??z.sfcf039.nc -+ /??/atmos/gfs.t??z.sfcf042.nc -+ /??/atmos/gfs.t??z.sfcf045.nc -+ /??/atmos/gfs.t??z.sfcf048.nc -- * -E -# This directory is a good candidate for compression -#Z - diff --git a/parm/transfer/transfer_rdhpcs_gfs_nawips.list b/parm/transfer/transfer_rdhpcs_gfs_nawips.list deleted file mode 100644 index 3465d3c360..0000000000 --- a/parm/transfer/transfer_rdhpcs_gfs_nawips.list +++ /dev/null @@ -1,39 +0,0 @@ -# This file specifies the directories to be transfered and, optionally, the files within -# those directories to include or exclude. If one directory is specified per line, it -# will be used as both the source and destination. If two directories are specified per -# line, separated by one or more spaces, the first will be used as the source and the -# second the destination. Directories that begin with "com/" will be resolved using -# the compath.py utility. Rules may be placed below each directory or directory pair -# and must begin with one of the following characters: -# - exclude, specifies an exclude pattern -# + include, specifies an include pattern -# . merge, specifies a merge-file to read for more rules -# : dir-merge, specifies a per-directory merge-file -# H hide, specifies a pattern for hiding files from the transfer -# S show, files that match the pattern are not hidden -# P protect, specifies a pattern for protecting files from deletion -# R risk, files that match the pattern are not protected -# ! clear, clears the current include/exclude list (takes no arg) -# B bytes, relative size of the path in relation to the other paths in the list -# D delete, delete extraneous files from destination directories (takes no arg) -# E encrypt, enables data encryption [two cores should be allocated] (takes no arg) -# W whole files, copy whole files rather than use delta-xfer algorithm (takes no arg) (v2.2.3+) -# T two-way syncronization will update both sides with latest changes (takes no arg) -# Z compress data as it is sent, accepts optional compression level argument (1-9) -# Rules higher in the list take precedence over lower ones. By default, all files in a -# directory are included, so if no exclude patterns match that file, it will be -# transferred. - -_COMROOT_/gfs/_SHORTVER_/gfs._PDY_/ _REMOTEPATH_/_ENVIR_/com/gfs/_SHORTVER_/gfs._PDY_/ -+ /??/ -+ /??/atmos/ -+ /??/atmos/gempak/ -+ /??/atmos/gempak/gfs_??????????f??? -+ /??/atmos/gempak/gfs40_??????????f??? -+ /??/atmos/gempak/gfs_*.snd -+ /??/atmos/gempak/gfs_*.sfc -- * -E -# This directory is a good candidate for compression -#Z -