diff --git a/test_docs/Makefile b/test_docs/Makefile
new file mode 100644
index 0000000..ba501f6
--- /dev/null
+++ b/test_docs/Makefile
@@ -0,0 +1,19 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
diff --git a/test_docs/make.bat b/test_docs/make.bat
new file mode 100644
index 0000000..4d9eb83
--- /dev/null
+++ b/test_docs/make.bat
@@ -0,0 +1,35 @@
+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd
diff --git a/test_docs/requirements.txt b/test_docs/requirements.txt
new file mode 100644
index 0000000..1c6bcc7
--- /dev/null
+++ b/test_docs/requirements.txt
@@ -0,0 +1,2 @@
+sphinx>=4.0
+pandoc
diff --git a/test_docs/source/conf.py b/test_docs/source/conf.py
new file mode 100644
index 0000000..891d976
--- /dev/null
+++ b/test_docs/source/conf.py
@@ -0,0 +1,254 @@
+#
+# Configuration file for the Sphinx documentation builder.
+#
+# This file does only contain a selection of the most common options. For a
+# full list see the documentation:
+# http://www.sphinx-doc.org/en/master/config
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+
+import inspect
+import os
+import sys
+
+sys.path.insert(0, os.path.abspath(os.path.join("..", "..")))
+
+from src import sandbox
+
+# -- Project information -----------------------------------------------------
+
+project = sandbox.__name__
+copyright = "2019, JB"
+author = "JB"
+
+# The short X.Y version
+version = sandbox.__version__
+# The full version, including alpha/beta/rc tags
+release = sandbox.__version__
+
+# export the documentation
+with open("intro.md", "w") as fp:
+    # fp.write(sandbox.__doc__.replace(os.linesep + ' ', ''))
+    fp.write(sandbox.__doc__)
+
+
+# -- General configuration ---------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+
+needs_sphinx = "1.8"
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    "sphinx.ext.autodoc",
+    "sphinx.ext.doctest",
+    "sphinx.ext.intersphinx",
+    "sphinx.ext.todo",
+    "sphinx.ext.coverage",
+    # 'sphinx.ext.viewcode',
+    "sphinx.ext.linkcode",
+    "sphinx.ext.napoleon",
+    "sphinx.ext.autosummary",
+    "recommonmark",
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ["_templates"]
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = [".rst", ".md"]
+
+# The master toctree document.
+master_doc = "index"
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = ["modules.rst"]
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = None
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+# http://www.sphinx-doc.org/en/master/usage/theming.html#builtin-themes
+html_theme = "classic"
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = []  # '_static'
+
+# Custom sidebar templates, must be a dictionary that maps document names
+# to template names.
+#
+# The default sidebars (for documents that don't match any pattern) are
+# defined by theme itself.  Builtin themes are using these templates by
+# default: ``['localtoc.html', 'relations.html', 'sourcelink.html',
+# 'searchbox.html']``.
+#
+# html_sidebars = {}
+
+
+# -- Options for HTMLHelp output ---------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = "SandboxDoc"
+
+
+# -- Options for LaTeX output ------------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, "SampleProject.tex", "Sample Project Documentation", "JB", "manual"),
+]
+
+
+# -- Options for manual page output ------------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [(master_doc, "sampleproject", "Sample Project Documentation", [author], 1)]
+
+
+# -- Options for Texinfo output ----------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (
+        master_doc,
+        "SampleProject",
+        "Sample Project Documentation",
+        author,
+        "SampleProject",
+        "One line description of project.",
+        "Miscellaneous",
+    ),
+]
+
+
+# -- Options for Epub output -------------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#
+# epub_identifier = ''
+
+# A unique identification for the text.
+#
+# epub_uid = ''
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ["search.html"]
+
+
+# -- Extension configuration -------------------------------------------------
+
+# -- Options for intersphinx extension ---------------------------------------
+
+# Example configuration for intersphinx: refer to the Python standard library.
+intersphinx_mapping = {"https://docs.python.org/": None}
+
+# -- Options for todo extension ----------------------------------------------
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = True
+
+# Options for the linkcode extension
+# ----------------------------------
+github_user = "Borda"
+github_repo = "py_sample-project"
+
+
+# Resolve function
+# This function is used to populate the (source) links in the API
+def linkcode_resolve(domain, info):
+    def find_source():
+        # try to find the file and line number, based on code from numpy:
+        # https://github.com/numpy/numpy/blob/master/doc/source/conf.py#L286
+        obj = sys.modules[info["module"]]
+        for part in info["fullname"].split("."):
+            obj = getattr(obj, part)
+        fname = inspect.getsourcefile(obj)
+        # https://github.com/rtfd/readthedocs.org/issues/5735
+        if any([s in fname for s in ("readthedocs", "rtfd", "checkouts")]):
+            path_top = os.path.abspath(os.path.join("..", "..", ".."))
+            fname = os.path.relpath(fname, start=path_top)
+        else:
+            # Local build, imitate master
+            fname = "master/" + os.path.relpath(fname, start=os.path.abspath(".."))
+        source, lineno = inspect.getsourcelines(obj)
+        return fname, lineno, lineno + len(source) - 1
+
+    if domain != "py" or not info["module"]:
+        return None
+    try:
+        filename = "%s#L%d-L%d" % find_source()
+    except Exception:
+        filename = info["module"].replace(".", "/") + ".py"
+    # import subprocess
+    # tag = subprocess.Popen(['git', 'rev-parse', 'HEAD'], stdout=subprocess.PIPE,
+    #                        universal_newlines=True).communicate()[0][:-1]
+    branch = filename.split("/")[0]
+    # do mapping from latest tags to master
+    branch = {"latest": "master", "stable": "master"}.get(branch, branch)
+    filename = "/".join([branch] + filename.split("/")[1:])
+    return "https://github.com/%s/%s/blob/%s" % (github_user, github_repo, filename)
+
+
+autodoc_member_order = "groupwise"
+autoclass_content = "both"
+autodoc_default_flags = [
+    "members",
+    "undoc-members",
+    "show-inheritance",
+    "private-members",
+    # 'special-members', 'inherited-members'
+]
diff --git a/test_docs/source/index.rst b/test_docs/source/index.rst
new file mode 100644
index 0000000..a35d593
--- /dev/null
+++ b/test_docs/source/index.rst
@@ -0,0 +1,20 @@
+Welcome to Sandbox's documentation!
+==========================================
+
+.. toctree::
+   :maxdepth: 3
+   :caption: Contents
+
+   readme
+   sandbox
+   examples
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
+
+.. include:: intro.md