From 5f2cb12ec16f966e904096f1d8d388c21b338fde Mon Sep 17 00:00:00 2001 From: Blake-Madden Date: Sun, 5 May 2024 12:41:47 -0400 Subject: [PATCH] Doxygen fixes --- docs/Doxyfile | 334 +++++++++++++++++++++++++++++++++---------------- src/stemming.h | 4 +- 2 files changed, 227 insertions(+), 111 deletions(-) diff --git a/docs/Doxyfile b/docs/Doxyfile index 2030ddd..4042d6b 100644 --- a/docs/Doxyfile +++ b/docs/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.9.3 +# Doxyfile 1.9.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -12,6 +12,16 @@ # For lists, items can also be appended using: # TAG += value [value, ...] # Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- # Project related configuration options @@ -60,16 +70,28 @@ PROJECT_LOGO = ../stemming.png OUTPUT_DIRECTORY = . -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- -# directories (in 2 levels) under the output directory of each output format and -# will distribute the generated files over these directories. Enabling this +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes -# performance problems for the file system. +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. # The default value is: NO. CREATE_SUBDIRS = NO +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode @@ -81,14 +103,14 @@ ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, -# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), -# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, -# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), -# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, -# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, -# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, -# Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -341,6 +363,17 @@ MARKDOWN_SUPPORT = YES TOC_INCLUDE_HEADINGS = 5 +# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to +# generate identifiers for the Markdown headings. Note: Every identifier is +# unique. +# Possible values are: DOXYGEN Use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0. and GITHUB Use the lower case version of title +# with any whitespace replaced by '-' and punctations characters removed.. +# The default value is: DOXYGEN. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +MARKDOWN_ID_STYLE = DOXYGEN + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -452,7 +485,7 @@ TYPEDEF_HIDES_STRUCT = NO LOOKUP_CACHE_SIZE = 0 -# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use +# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use # during processing. When set to 0 doxygen will based this on the number of # cores available in the system. You can set it explicitly to a value larger # than 0 to get more control over the balance between CPU load and processing @@ -465,6 +498,14 @@ LOOKUP_CACHE_SIZE = 0 NUM_PROC_THREADS = 1 +# If the TIMESTAMP tag is set different from NO then each generated page will +# contain the date or date and time when the page was generated. Setting this to +# NO can help when comparing the output of multiple runs. +# Possible values are: YES, NO, DATETIME and DATE. +# The default value is: NO. + +TIMESTAMP = NO + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -546,7 +587,8 @@ HIDE_UNDOC_MEMBERS = YES # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = YES @@ -577,14 +619,15 @@ INTERNAL_DOCS = NO # filesystem is case sensitive (i.e. it supports files in the same directory # whose names only differ in casing), the option must be set to YES to properly # deal with such files in case they appear in the input. For filesystems that -# are not case sensitive the option should be be set to NO to properly deal with +# are not case sensitive the option should be set to NO to properly deal with # output files written for symbols that only differ in casing, such as for two # classes, one named CLASS and the other named Class, and to also support # references to files without having to specify the exact matching casing. On # Windows (including Cygwin) and MacOS, users should typically set this option # to NO, whereas on Linux or other Unix flavors it should typically be set to # YES. -# The default value is: system dependent. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. CASE_SENSE_NAMES = NO @@ -793,7 +836,7 @@ CITE_BIB_FILES = # messages are off. # The default value is: NO. -QUIET = NO +QUIET = YES # The WARNINGS tag can be used to turn on/off the warning messages that are # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES @@ -836,11 +879,26 @@ WARN_IF_INCOMPLETE_DOC = YES WARN_NO_PARAMDOC = YES +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about +# undocumented enumeration values. If set to NO, doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS # then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but # at the end of the doxygen process doxygen will return with a non-zero status. -# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not +# write the warning messages in between other messages but write them at the end +# of a run, in case a WARN_LOGFILE is defined the warning messages will be +# besides being in the defined file also be shown at the end of a run, unless +# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case +# the behavior will remain as with the setting FAIL_ON_WARNINGS. +# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. # The default value is: NO. WARN_AS_ERROR = NO @@ -851,10 +909,21 @@ WARN_AS_ERROR = NO # and the warning text. Optionally the format may contain $version, which will # be replaced by the version of the file (if it could be obtained via # FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT # The default value is: $file:$line: $text. WARN_FORMAT = "$file:$line: $text" +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard # error (stderr). In case the file specified cannot be opened for writing the @@ -874,7 +943,8 @@ WARN_LOGFILE = # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = ../src \ +INPUT = ../readme.md \ + ../src \ ../ # This tag can be used to specify the character encoding of the source files @@ -882,10 +952,21 @@ INPUT = ../src \ # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: # https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 +# This tag can be used to specify the character encoding of the source files +# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding +# "INPUT_ENCODING" for further information on supported encodings. + +INPUT_FILE_ENCODING = + # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. @@ -965,7 +1046,7 @@ RECURSIVE = YES # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = +EXCLUDE = ../tests # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded @@ -988,9 +1069,6 @@ EXCLUDE_PATTERNS = # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, # ANamespace::AClass, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = @@ -1035,6 +1113,11 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # +# Note that doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. @@ -1076,6 +1159,15 @@ FILTER_SOURCE_PATTERNS = USE_MDFILE_AS_MAINPAGE = ../readme.md +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1213,10 +1305,11 @@ CLANG_DATABASE_PATH = ALPHABETICAL_INDEX = YES -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1295,7 +1388,12 @@ HTML_STYLESHEET = # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_EXTRA_STYLESHEET = @@ -1310,6 +1408,19 @@ HTML_EXTRA_STYLESHEET = HTML_EXTRA_FILES = +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generate light mode output, DARK always +# generate dark mode output, AUTO_LIGHT automatically set the mode according to +# the user preference, use light mode if no preference is set (the default), +# AUTO_DARK automatically set the mode according to the user preference, use +# dark mode if no preference is set and TOGGLE allow to user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a color-wheel, see @@ -1340,15 +1451,6 @@ HTML_COLORSTYLE_SAT = 100 HTML_COLORSTYLE_GAMMA = 80 -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to YES can help to show when doxygen was last run and thus if the -# documentation is up to date. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = NO - # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML # documentation will contain a main index with vertical navigation menus that # are dynamically created via JavaScript. If disabled, the navigation index will @@ -1498,6 +1600,16 @@ BINARY_TOC = NO TOC_EXPAND = NO +# The SITEMAP_URL tag is used to specify the full URL of the place where the +# generated documentation will be placed on the server by the user during the +# deployment of the documentation. The generated sitemap is called sitemap.xml +# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL +# is specified no sitemap is generated. For information about the sitemap +# protocol see https://www.sitemaps.org +# This tag requires that the tag GENERATE_HTML is set to YES. + +SITEMAP_URL = + # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help @@ -1673,17 +1785,6 @@ HTML_FORMULA_FORMAT = png FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1997,9 +2098,16 @@ PDF_HYPERLINKS = YES USE_PDFLATEX = YES -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode -# command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. +# The LATEX_BATCHMODE tag ignals the behavior of LaTeX in case of an error. +# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch +# mode nothing is printed on the terminal, errors are scrolled as if is +# hit at every error; missing files that TeX tries to input or request from +# keyboard input (\read on a not open input stream) cause the job to abort, +# NON_STOP In nonstop mode the diagnostic message will appear on the terminal, +# but there is no possibility of user interaction just like in batch mode, +# SCROLL In scroll mode, TeX will stop only for missing files to input or if +# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at +# each error, asking for user intervention. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2020,14 +2128,6 @@ LATEX_HIDE_INDICES = NO LATEX_BIB_STYLE = plain -# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_TIMESTAMP = NO - # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) # path from which the emoji images will be read. If a relative path is entered, # it will be relative to the LATEX_OUTPUT directory. If left blank the @@ -2193,7 +2293,7 @@ DOCBOOK_OUTPUT = docbook #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures # the structure of the code including all documentation. Note that this feature # is still experimental and incomplete at the moment. # The default value is: NO. @@ -2278,7 +2378,8 @@ SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the -# preprocessor. +# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of +# RECURSIVE has no effect here. # This tag requires that the tag SEARCH_INCLUDES is set to YES. INCLUDE_PATH = @@ -2367,16 +2468,9 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to diagram generator tools #--------------------------------------------------------------------------- -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. - -DIA_PATH = - # If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2385,7 +2479,7 @@ HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: -# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO # The default value is: NO. @@ -2402,37 +2496,51 @@ HAVE_DOT = NO DOT_NUM_THREADS = 0 -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see Node, +# Edge and Graph Attributes specification You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about +# arrows shapes. +# The default value is: labelfontname=Helvetica,labelfontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification +# The default value is: shape=box,height=0.2,width=0.4. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" + +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a -# graph for each documented class showing the direct and indirect inheritance -# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, -# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set -# to TEXT the direct and indirect inheritance relations will be shown as texts / -# links. -# Possible values are: NO, YES, TEXT and GRAPH. +# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will +# generate a graph for each documented class showing the direct and indirect +# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and +# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case +# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the +# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. +# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance +# relations will be shown as texts / links. +# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. # The default value is: YES. CLASS_GRAPH = YES @@ -2447,7 +2555,8 @@ CLASS_GRAPH = YES COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. +# groups, showing the direct groups dependencies. See also the chapter Grouping +# in the manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2572,7 +2681,7 @@ DIR_GRAPH_MAX_DEPTH = 1 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: -# http://www.graphviz.org/)). +# https://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). @@ -2609,11 +2718,12 @@ DOT_PATH = DOTFILE_DIRS = -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. -MSCFILE_DIRS = +DIA_PATH = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile @@ -2663,18 +2773,6 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2702,3 +2800,19 @@ GENERATE_LEGEND = YES # The default value is: YES. DOT_CLEANUP = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will +# use a built-in version of mscgen tool to produce the charts. Alternatively, +# the MSCGEN_TOOL tag can also specify the name an external tool. For instance, +# specifying prog as the value, doxygen will call the tool as prog -T +# -o . The external tool should support +# output file formats "png", "eps", "svg", and "ismap". + +MSCGEN_TOOL = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = diff --git a/src/stemming.h b/src/stemming.h index 7136319..e1f829d 100644 --- a/src/stemming.h +++ b/src/stemming.h @@ -179,6 +179,7 @@ namespace stemming /// @brief The string type that this class will accept. using string_type = string_typeT; /// @brief The main interface for stemming a word. + /// @param[in,out] text The text to stem. virtual void operator()(string_typeT& text) = 0; /// @returns The stemmer's language. [[nodiscard]] @@ -2559,7 +2560,7 @@ namespace stemming ennuie -> ennuIe yeux -> Yeux quand -> qUand - @param text[in,out] The string to update. + @param[in,out] text The string to update. @param vowel_string The list of vowels used by the stemmer's language.*/ void hash_french_yui(string_typeT& text, const wchar_t* vowel_string) @@ -3195,6 +3196,7 @@ namespace stemming /// @brief The string type that this class will accept. using string_type = string_typeT; /// @brief No-op stemming of declared string type. + /// @param[in,out] text The text to stem. void operator()([[maybe_unused]] string_typeT& text) final {} /// @returns The stemmer's language.